The timeout value is in jiffies, so it should be using HZ, not a plain
number. Assume '100' means 100ms here and adapt accordingly.
Signed-off-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
Cc: Eric Miao <eric.y.miao@xxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
Cc: Paul Shen <paul.shen@xxxxxxxxxxx>
Cc: Mike Rapoport <mike@xxxxxxxxxxxxxx>
---
Janitorial fix, not tested due to no hardware.
arch/arm/mach-pxa/viper.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 1dd1334..c25921f 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -33,6 +33,7 @@
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/gpio.h>
+#include <linux/jiffies.h>
#include <linux/i2c-gpio.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
@@ -453,7 +454,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = {
.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ / 10,
};
static struct platform_device i2c_bus_device = {
@@ -778,7 +779,7 @@ static void __init viper_tpm_init(void)
.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ / 10,
};
char *errstr;
--
1.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
