Re: [uClinux-dev] Re: [PATCH v2] m68knommu: driver for Freescale Coldfire I2C controller.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello all,

On Mon, Jan 25, 2010 at 11:56:30AM -0800, Steven King wrote:
> > >
> > > Add support for the I2C controller used on Freescale/Motorola Coldfire
> > > MCUs.
> > >
> > > Signed-off-by: Steven King <sfking@xxxxxxxxx>

What's the status of this ?

I need to use i2c for a coldfire uclinux project (with a mcf5484) and I
now have 3 different coldfire i2c drivers, none of which is in mainline.

i2c-mcf.c (from uClinux-dist-20090618, but not in http://git.kernel.org/?p=linux/kernel/git/gerg/m68knommu.git;a=summary)
i2c-mcf548x.c (from ltib-m5475evb-20080808, found as "Linux BSP for MCF5484LITE, MCF5475/85EVB" at http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MCF548X&fpsp=1&tab=Design_Tools_Tab)
i2c-coldfire.c (from http://lkml.org/lkml/2010/1/11/165)

I like to work with mainline sources to be be able to contribute to and benefit
from collective work.

Which one has the best chances to be put in mainline ?

Best regards

Philippe
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux