[PATCH v8 0/4] i2c-mpc: add support for the Freescale MPC512x and other fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series adds support for the MPC512x from Freescale to the
i2c-mpc driver. At that occasion, issues with  __devinit[data] have
been fixed and the doc of the FSL I2C dts bindings updated. It has
been tested on a MPC5121ADS, TQM5200 and TQM8560 board

Changes since v1:

- use macro MPC_I2C_CLOCK_PRESERVE/SAFE for the special clock settings.
- document the special DTS node "fsl,mpc5121-i2c-ctrl".
- update and correct the Kconfig help.
- some other minor fixes as suggested by Wolfram.

Changes since v2:

- use __init[data] instead of __devinit[data] for this driver.

Changes since v3:

- switch back to __devinit[data] as pointed out by Ben.

Changes since v4:

- check MPC_I2C_CLOCK_SAFE instead of "!clock" as suggested by Wolfram.
- update MODULE_DESCRIPTION().

Changes since v5 (suggested by Grant Likely):

- various correctings for labling initialization functions and data
  (this is tricky because section mismatches are not always obvious).
- add a separate patch for renaming the setclock into setup functions.
- correct the doc of the I2C bindings, e.g. don't mention the legacy
  clock setting and remove obsolte parts.

Changes since v6:

- use __devinitconst for const data as suggested by Stephen Rothwell.

Changes since v7:

- fix non-bisectable patch 1 as pointed out by Grant Likely.

Wolfgang

Wolfgang Grandegger (4):
  i2c-mpc: use __devinit[data] for initialization functions and data
  i2c-mpc: rename "setclock" initialization functions to "setup"
  i2c-mpc: add support for the MPC512x processors from Freescale
  powerpc: doc/dts-bindings: update doc of FSL I2C bindings

 Documentation/powerpc/dts-bindings/fsl/i2c.txt |   30 +++-
 drivers/i2c/busses/Kconfig                     |    7 +-
 drivers/i2c/busses/i2c-mpc.c                   |  194 +++++++++++++++---------
 3 files changed, 146 insertions(+), 85 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux