From: Wolfgang Grandegger <wg@xxxxxxx> This patch series adds support for the MPC512x from Freescale to the i2c-mpc driver. At that occasion, issues with __devinit[data] have been fixed and the doc of the FSL I2C dts bindings updated. It has been tested on a MPC5121ADS, TQM5200 and TQM8560 board Changes since v1: - use macro MPC_I2C_CLOCK_PRESERVE/SAFE for the special clock settings. - document the special DTS node "fsl,mpc5121-i2c-ctrl". - update and correct the Kconfig help. - some other minor fixes as suggested by Wolfram. Changes since v2: - use __init[data] instead of __devinit[data] for this driver. Changes since v3: - switch back to __devinit[data] as pointed out by Ben. Changes since v4: - check MPC_I2C_CLOCK_SAFE instead of "!clock" as suggested by Wolfram. - update MODULE_DESCRIPTION(). Changes since v5 (suggested by Grant Likely): - various correctings for labling initialization functions and data (this is tricky because section mismatches are not always obvious). - add a separate patch for renaming the setclock into setup functions. - correct the doc of the I2C bindings, e.g. don't mention the legacy clock setting and remove obsolte parts. Wolfgang Wolfgang Grandegger (4): i2c-mpc: use __devinit[data] for initialization functions and data i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: add support for the MPC512x processors from Freescale powerpc: doc/dts-bindings: update doc of FSL I2C bindings Documentation/powerpc/dts-bindings/fsl/i2c.txt | 30 +++- drivers/i2c/busses/Kconfig | 7 +- drivers/i2c/busses/i2c-mpc.c | 194 +++++++++++++++--------- 3 files changed, 146 insertions(+), 85 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
