Re: [PATCH 2/6] i2c: davinci: Remove MOD_REG_BIT and IO_ADDRESS usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ben Dooks <ben-linux@xxxxxxxxx> writes:

> On Tue, Jan 26, 2010 at 03:41:29PM -0800, Kevin Hilman wrote:
>> From: Chaithrika U S <chaithrika@xxxxxx>
>> 
>> Cleanup the DaVinci I2C driver. Remove MOD_REG_BIT macro.
>> Also use ioremap instead of IO_ADDRESS macro.
>
> would have been nicer to do each of these seperately.

ok, good to note for next time.  Can this version go through 
through as is.

Kevin

>> Signed-off-by: Chaithrika U S <chaithrika@xxxxxx>
>> Acked-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
>> ---
>>  drivers/i2c/busses/i2c-davinci.c |   77 +++++++++++++++++++-------------------
>>  1 files changed, 38 insertions(+), 39 deletions(-)
>> 
>> diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
>> index 444a9f2..34a48d0 100644
>> --- a/drivers/i2c/busses/i2c-davinci.c
>> +++ b/drivers/i2c/busses/i2c-davinci.c
>> @@ -37,7 +37,6 @@
>>  #include <linux/io.h>
>>  
>>  #include <mach/hardware.h>
>> -
>>  #include <mach/i2c.h>
>>  
>>  /* ----- global defines ----------------------------------------------- */
>> @@ -71,37 +70,29 @@
>>  #define DAVINCI_I2C_IVR_NACK	0x02
>>  #define DAVINCI_I2C_IVR_AL	0x01
>>  
>> -#define DAVINCI_I2C_STR_BB	(1 << 12)
>> -#define DAVINCI_I2C_STR_RSFULL	(1 << 11)
>> -#define DAVINCI_I2C_STR_SCD	(1 << 5)
>> -#define DAVINCI_I2C_STR_ARDY	(1 << 2)
>> -#define DAVINCI_I2C_STR_NACK	(1 << 1)
>> -#define DAVINCI_I2C_STR_AL	(1 << 0)
>> -
>> -#define DAVINCI_I2C_MDR_NACK	(1 << 15)
>> -#define DAVINCI_I2C_MDR_STT	(1 << 13)
>> -#define DAVINCI_I2C_MDR_STP	(1 << 11)
>> -#define DAVINCI_I2C_MDR_MST	(1 << 10)
>> -#define DAVINCI_I2C_MDR_TRX	(1 << 9)
>> -#define DAVINCI_I2C_MDR_XA	(1 << 8)
>> -#define DAVINCI_I2C_MDR_RM	(1 << 7)
>> -#define DAVINCI_I2C_MDR_IRS	(1 << 5)
>> -
>> -#define DAVINCI_I2C_IMR_AAS	(1 << 6)
>> -#define DAVINCI_I2C_IMR_SCD	(1 << 5)
>> -#define DAVINCI_I2C_IMR_XRDY	(1 << 4)
>> -#define DAVINCI_I2C_IMR_RRDY	(1 << 3)
>> -#define DAVINCI_I2C_IMR_ARDY	(1 << 2)
>> -#define DAVINCI_I2C_IMR_NACK	(1 << 1)
>> -#define DAVINCI_I2C_IMR_AL	(1 << 0)
>> -
>> -#define MOD_REG_BIT(val, mask, set) do { \
>> -	if (set) { \
>> -		val |= mask; \
>> -	} else { \
>> -		val &= ~mask; \
>> -	} \
>> -} while (0)
>> +#define DAVINCI_I2C_STR_BB	BIT(12)
>> +#define DAVINCI_I2C_STR_RSFULL	BIT(11)
>> +#define DAVINCI_I2C_STR_SCD	BIT(5)
>> +#define DAVINCI_I2C_STR_ARDY	BIT(2)
>> +#define DAVINCI_I2C_STR_NACK	BIT(1)
>> +#define DAVINCI_I2C_STR_AL	BIT(0)
>> +
>> +#define DAVINCI_I2C_MDR_NACK	BIT(15)
>> +#define DAVINCI_I2C_MDR_STT	BIT(13)
>> +#define DAVINCI_I2C_MDR_STP	BIT(11)
>> +#define DAVINCI_I2C_MDR_MST	BIT(10)
>> +#define DAVINCI_I2C_MDR_TRX	BIT(9)
>> +#define DAVINCI_I2C_MDR_XA	BIT(8)
>> +#define DAVINCI_I2C_MDR_RM	BIT(7)
>> +#define DAVINCI_I2C_MDR_IRS	BIT(5)
>> +
>> +#define DAVINCI_I2C_IMR_AAS	BIT(6)
>> +#define DAVINCI_I2C_IMR_SCD	BIT(5)
>> +#define DAVINCI_I2C_IMR_XRDY	BIT(4)
>> +#define DAVINCI_I2C_IMR_RRDY	BIT(3)
>> +#define DAVINCI_I2C_IMR_ARDY	BIT(2)
>> +#define DAVINCI_I2C_IMR_NACK	BIT(1)
>> +#define DAVINCI_I2C_IMR_AL	BIT(0)
>
> surely 1 << x isn't too difficult to understand??
>   
>>  struct davinci_i2c_dev {
>>  	struct device           *dev;
>> @@ -155,7 +146,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
>>  
>>  	/* put I2C into reset */
>>  	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
>> -	MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 0);
>> +	w &= ~DAVINCI_I2C_MDR_IRS;
>>  	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
>>  
>>  	/* NOTE: I2C Clock divider programming info
>> @@ -205,7 +196,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
>>  
>>  	/* Take the I2C module out of reset: */
>>  	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
>> -	MOD_REG_BIT(w, DAVINCI_I2C_MDR_IRS, 1);
>> +	w |= DAVINCI_I2C_MDR_IRS;
>>  	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
>>  
>>  	/* Enable interrupts */
>> @@ -287,9 +278,9 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
>>  	/* Enable receive or transmit interrupts */
>>  	w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
>>  	if (msg->flags & I2C_M_RD)
>> -		MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 1);
>> +		w |= DAVINCI_I2C_IMR_RRDY;
>>  	else
>> -		MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1);
>> +		w |= DAVINCI_I2C_IMR_XRDY;
>>  	davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
>>  
>>  	dev->terminate = 0;
>> @@ -346,7 +337,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
>>  			return msg->len;
>>  		if (stop) {
>>  			w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
>> -			MOD_REG_BIT(w, DAVINCI_I2C_MDR_STP, 1);
>> +			w |= DAVINCI_I2C_MDR_STP;
>>  			davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
>>  		}
>>  		return -EREMOTEIO;
>> @@ -482,7 +473,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
>>  
>>  				w = davinci_i2c_read_reg(dev,
>>  							 DAVINCI_I2C_IMR_REG);
>> -				MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 0);
>> +				w &= ~DAVINCI_I2C_IMR_XRDY;
>>  				davinci_i2c_write_reg(dev,
>>  						      DAVINCI_I2C_IMR_REG,
>>  						      w);
>> @@ -561,7 +552,12 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>>  	}
>>  	clk_enable(dev->clk);
>>  
>> -	dev->base = (void __iomem *)IO_ADDRESS(mem->start);
>> +	dev->base = ioremap(mem->start, resource_size(mem));
>> +	if (!dev->base) {
>> +		r = -EBUSY;
>> +		goto err_mem_ioremap;
>> +	}
>> +
>
> this looks like you've got >1 change per patch?
>
>>  	i2c_davinci_init(dev);
>>  
>>  	r = request_irq(dev->irq, i2c_davinci_isr, 0, pdev->name, dev);
>> @@ -591,6 +587,8 @@ static int davinci_i2c_probe(struct platform_device *pdev)
>>  err_free_irq:
>>  	free_irq(dev->irq, dev);
>>  err_unuse_clocks:
>> +	iounmap(dev->base);
>> +err_mem_ioremap:
>>  	clk_disable(dev->clk);
>>  	clk_put(dev->clk);
>>  	dev->clk = NULL;
>> @@ -619,6 +617,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
>>  
>>  	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
>>  	free_irq(IRQ_I2C, dev);
>> +	iounmap(dev->base);
>>  	kfree(dev);
>>  
>>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> -- 
>> 1.6.6
>> 
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> -- 
> Ben (ben@xxxxxxxxx, http://www.fluff.org/)
>
>   'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux