From: Wolfgang Grandegger <wg@xxxxxxx>
The "setclock" initialization functions have been renamed to "setup"
because I2C interrupts must be enabled for the MPC512x. This requires
to handle "fsl,preserve-clocking" in a slighly different way. Also,
the old settings are now reported calling dev_dbg(). For the MPC512x
the clock setup function of the MPC52xx can be re-used. Furthermore,
the Kconfig help has been updated and corrected.
Signed-off-by: Wolfgang Grandegger <wg@xxxxxxx>
---
drivers/i2c/busses/Kconfig | 7 +-
drivers/i2c/busses/i2c-mpc.c | 127 ++++++++++++++++++++++++++++++------------
2 files changed, 94 insertions(+), 40 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5f318ce..5477e41 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -418,13 +418,12 @@ config I2C_IXP2000
instead.
config I2C_MPC
- tristate "MPC107/824x/85xx/52xx/86xx"
+ tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
depends on PPC32
help
If you say yes to this option, support will be included for the
- built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
- MPC85xx/MPC8641 family processors. The driver may also work on 52xx
- family processors, though interrupts are known not to work.
+ built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
+ MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
This driver can also be built as a module. If so, the module
will be called i2c-mpc.
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 275ebe6..1af0730 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -31,6 +31,9 @@
#define DRV_NAME "mpc-i2c"
+#define MPC_I2C_CLOCK_SAFE 0
+#define MPC_I2C_CLOCK_PRESERVE (~0U)
+
#define MPC_I2C_FDR 0x04
#define MPC_I2C_CR 0x08
#define MPC_I2C_SR 0x0c
@@ -67,9 +70,8 @@ struct mpc_i2c_divider {
};
struct mpc_i2c_data {
- void (*setclock)(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler);
+ void (*setup)(struct device_node *node, struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler);
u32 prescaler;
};
@@ -164,7 +166,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
-#ifdef CONFIG_PPC_MPC52xx
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct __devinitdata mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
@@ -216,12 +218,18 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
return div ? (int)div->fdr : -EINVAL;
}
-static void __devinit mpc_i2c_setclock_52xx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
int ret, fdr;
+ if (clock == MPC_I2C_CLOCK_PRESERVE) {
+ dev_dbg(i2c->dev, "using fdr %d\n",
+ readb(i2c->base + MPC_I2C_FDR));
+ return;
+ }
+
ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
@@ -230,13 +238,49 @@ static void __devinit mpc_i2c_setclock_52xx(struct device_node *node,
if (ret >= 0)
dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
-#else /* !CONFIG_PPC_MPC52xx */
-static void __devinit mpc_i2c_setclock_52xx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_PPC_MPC512x
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+ struct device_node *node_ctrl;
+ void __iomem *ctrl;
+ const u32 *pval;
+ u32 idx;
+
+ /* Enable I2C interrupts for mpc5121 */
+ node_ctrl = of_find_compatible_node(NULL, NULL,
+ "fsl,mpc5121-i2c-ctrl");
+ if (node_ctrl) {
+ ctrl = of_iomap(node_ctrl, 0);
+ if (ctrl) {
+ /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
+ pval = of_get_property(node, "reg", NULL);
+ idx = (*pval & 0xff) / 0x20;
+ setbits32(ctrl, 1 << (24 + idx * 2));
+ iounmap(ctrl);
+ }
+ of_node_put(node_ctrl);
+ }
+
+ /* The clock setup for the 52xx works also fine for the 512x */
+ mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+}
+#else /* CONFIG_PPC_MPC512x */
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
}
-#endif /* CONFIG_PPC_MPC52xx*/
+#endif /* CONFIG_PPC_MPC512x */
#ifdef CONFIG_FSL_SOC
static const struct __devinitdata mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
@@ -322,12 +366,19 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
return div ? (int)div->fdr : -EINVAL;
}
-static void __devinit mpc_i2c_setclock_8xxx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
int ret, fdr;
+ if (clock == MPC_I2C_CLOCK_PRESERVE) {
+ dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
+ readb(i2c->base + MPC_I2C_DFSRR),
+ readb(i2c->base + MPC_I2C_FDR));
+ return;
+ }
+
ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
@@ -340,9 +391,9 @@ static void __devinit mpc_i2c_setclock_8xxx(struct device_node *node,
}
#else /* !CONFIG_FSL_SOC */
-static void __devinit mpc_i2c_setclock_8xxx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
}
#endif /* CONFIG_FSL_SOC */
@@ -496,7 +547,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
{
struct mpc_i2c *i2c;
const u32 *prop;
- u32 clock = 0;
+ u32 clock = MPC_I2C_CLOCK_SAFE;
int result = 0;
int plen;
@@ -525,21 +576,21 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
}
}
- if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+ if (of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+ clock = MPC_I2C_CLOCK_PRESERVE;
+ } else {
prop = of_get_property(op->node, "clock-frequency", &plen);
if (prop && plen == sizeof(u32))
clock = *prop;
+ }
- if (match->data) {
- struct mpc_i2c_data *data =
- (struct mpc_i2c_data *)match->data;
- data->setclock(op->node, i2c, clock, data->prescaler);
- } else {
- /* Backwards compatibility */
- if (of_get_property(op->node, "dfsrr", NULL))
- mpc_i2c_setclock_8xxx(op->node, i2c,
- clock, 0);
- }
+ if (match->data) {
+ struct mpc_i2c_data *data = match->data;
+ data->setup(op->node, i2c, clock, data->prescaler);
+ } else {
+ /* Backwards compatibility */
+ if (of_get_property(op->node, "dfsrr", NULL))
+ mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
}
dev_set_drvdata(&op->dev, i2c);
@@ -584,21 +635,25 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
return 0;
};
+static struct mpc_i2c_data __devinitdata mpc_i2c_data_512x = {
+ .setup = mpc_i2c_setup_512x,
+};
+
static struct mpc_i2c_data __devinitdata mpc_i2c_data_52xx = {
- .setclock = mpc_i2c_setclock_52xx,
+ .setup = mpc_i2c_setup_52xx,
};
static struct mpc_i2c_data __devinitdata mpc_i2c_data_8313 = {
- .setclock = mpc_i2c_setclock_8xxx,
+ .setup = mpc_i2c_setup_8xxx,
};
static struct mpc_i2c_data __devinitdata mpc_i2c_data_8543 = {
- .setclock = mpc_i2c_setclock_8xxx,
+ .setup = mpc_i2c_setup_8xxx,
.prescaler = 2,
};
static struct mpc_i2c_data __devinitdata mpc_i2c_data_8544 = {
- .setclock = mpc_i2c_setclock_8xxx,
+ .setup = mpc_i2c_setup_8xxx,
.prescaler = 3,
};
@@ -606,6 +661,7 @@ static const struct of_device_id mpc_i2c_of_match[] = {
{.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
{.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
{.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
{.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
{.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
{.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
@@ -615,7 +671,6 @@ static const struct of_device_id mpc_i2c_of_match[] = {
};
MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
-
/* Structure for a device driver */
static struct of_platform_driver mpc_i2c_driver = {
.match_table = mpc_i2c_of_match,
@@ -648,5 +703,5 @@ module_exit(fsl_i2c_exit);
MODULE_AUTHOR("Adrian Cox <adrian@xxxxxxxxxxxxxx>");
MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
- "MPC824x/85xx/52xx processors");
+ "MPC824x/85xx/512x/52xx processors");
MODULE_LICENSE("GPL");
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
