Hi, there!
It seems like
http://www.lm-sensors.org/wiki/Configurations/FancyManufacturer is
broken, so I'm sending lm_sensors configuration for my motherboard
straight to your mailing list. I hope someone will add this
configuration to your TRAC/Wiki.
Cheers!
# lm_sensors configuration for Gigabyte M61P-S3 AM2+ motherboard
chip "it8716-*"
# Voltages
label in0 "VCore" # CPU Core Voltage
label in1 "VDDR" # DDR2 1.8V
label in2 "+3.3V" # VCC3
label in3 "+5V" # VCC
label in4 "+12V"
label in5 "-12V"
label in6 "-5V"
label in7 "5VSB" # VCCH
label in8 "VBat"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in4 ((30/10)+1)*@ , @/((30/10)+1)
compute in5 -(30/10+1)*@, -@/(30/10+1)
compute in6 (1+120/56)*@ - 4.096*120/56 , (@ + 4.096*120/56)/(1+120/56)
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
# Not setting in0 min/max, because different AMD CPUs have
# different voltages, besides with C'n'Q enabled this voltage
# can fluctuate a lot
# set in0_min vid * 0.95
# set in0_max vid * 1.05
set in1_min 1.8 * 0.95
set in1_max 1.8 * 1.05
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5 * 0.95
set in3_max 5 * 1.05
set in4_min 12 * 0.95
set in4_max 12 * 1.05
set in5_max -12 * 0.95
set in5_min -12 * 1.05
set in6_max -5 * 0.95
set in6_min -5 * 1.05
set in7_min 5 * 0.95
set in7_max 5 * 1.05
# The chip does not support in8 min/max
# Temperatures
label temp1 "M/B Temp"
label temp2 "CPU Temp"
label temp3 "M/B Temp"
set temp2_max 60
# Fans
label fan1 "CPU Fan"
label fan2 "Case Fan"
ignore fan3 # This motherboard doesn't have the second system fan
# My fans can stop if the temperature is OK, adjust for your situation
# set fan1_min 2000
# set fan2_min 2000
