[PATCH 3/3] Allow mixed endianness accesses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Allows CPUs of a given endianness to access a dw controller of a different
endianness. Endianncess difference is detected at run time through the dw
component type register.

---
 drivers/i2c/busses/i2c-designware.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

Index: linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
===================================================================
--- linux-2.6_i2c.orig/drivers/i2c/busses/i2c-designware.c
+++ linux-2.6_i2c/drivers/i2c/busses/i2c-designware.c
@@ -36,6 +36,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/swab.h>
 
 /*
  * Registers offset
@@ -192,6 +193,7 @@ static char *abort_sources[] = {
  * @status: i2c master status, one of STATUS_*
  * @abort_source: copy of the TX_ABRT_SOURCE register
  * @irq: interrupt number for the i2c master
+ * @swab: true if the instantiated IP is of different endianess
  * @adapter: i2c subsystem adapter node
  * @tx_fifo_depth: depth of the hardware tx fifo
  * @rx_fifo_depth: depth of the hardware rx fifo
@@ -215,6 +217,7 @@ struct dw_i2c_dev {
 	unsigned int		status;
 	u32			abort_source;
 	int			irq;
+	int			swab;
 	struct i2c_adapter	adapter;
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
@@ -222,11 +225,19 @@ struct dw_i2c_dev {
 
 static u32 i2c_dw_readl(struct dw_i2c_dev *dev, int addr)
 {
-	return readl(dev->base + addr);
+	u32 value = readl(dev->base + addr);
+
+	if (dev->swab)
+		return swab32(value);
+	else
+		return value;
 }
 
 static void i2c_dw_writel(struct dw_i2c_dev *dev, u32 b, int addr)
 {
+	if (dev->swab)
+		b = swab32(b);
+
 	writel(b, dev->base + addr);
 }
 
@@ -759,7 +770,9 @@ static int __devinit dw_i2c_probe(struct
 	{
 		u32 comp_type = i2c_dw_readl(dev, DW_IC_COMP_TYPE);
 
-		if (0x44570140 != comp_type) {
+		if (___constant_swab32(0x44570140) == comp_type)
+			dev->swab = 1;
+		else if (0x44570140 != comp_type) {
 			dev_err(&pdev->dev, "Unknown Synopsys component type: "
 					"0x%08x\n",	comp_type);
 			r = -ENODEV;

-- 
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux