The current i2c-omap driver is set up for 32-bit registers, which
corresponds to most OMAP devices. However, OMAP730/850 based
devices use a 16-bit register size.
This change modifies the driver to perform a runtime CPU type check
to determine the register sizes, and uses a bit shift of either 1
or 2 bits to compute the proper register sizes for all registers.
Signed-off-by: Cory Maccarrone <darkstar6262@xxxxxxxxx>
---
drivers/i2c/busses/i2c-omap.c | 44 +++++++++++++++++++++++-----------------
1 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 827da08..4f8e2f5 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -49,24 +49,24 @@
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
#define OMAP_I2C_REV_REG 0x00
-#define OMAP_I2C_IE_REG 0x04
-#define OMAP_I2C_STAT_REG 0x08
-#define OMAP_I2C_IV_REG 0x0c
+#define OMAP_I2C_IE_REG 0x01
+#define OMAP_I2C_STAT_REG 0x02
+#define OMAP_I2C_IV_REG 0x03
/* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
-#define OMAP_I2C_WE_REG 0x0c
-#define OMAP_I2C_SYSS_REG 0x10
-#define OMAP_I2C_BUF_REG 0x14
-#define OMAP_I2C_CNT_REG 0x18
-#define OMAP_I2C_DATA_REG 0x1c
-#define OMAP_I2C_SYSC_REG 0x20
-#define OMAP_I2C_CON_REG 0x24
-#define OMAP_I2C_OA_REG 0x28
-#define OMAP_I2C_SA_REG 0x2c
-#define OMAP_I2C_PSC_REG 0x30
-#define OMAP_I2C_SCLL_REG 0x34
-#define OMAP_I2C_SCLH_REG 0x38
-#define OMAP_I2C_SYSTEST_REG 0x3c
-#define OMAP_I2C_BUFSTAT_REG 0x40
+#define OMAP_I2C_WE_REG 0x03
+#define OMAP_I2C_SYSS_REG 0x04
+#define OMAP_I2C_BUF_REG 0x05
+#define OMAP_I2C_CNT_REG 0x06
+#define OMAP_I2C_DATA_REG 0x07
+#define OMAP_I2C_SYSC_REG 0x08
+#define OMAP_I2C_CON_REG 0x09
+#define OMAP_I2C_OA_REG 0x0a
+#define OMAP_I2C_SA_REG 0x0b
+#define OMAP_I2C_PSC_REG 0x0c
+#define OMAP_I2C_SCLL_REG 0x0d
+#define OMAP_I2C_SCLH_REG 0x0e
+#define OMAP_I2C_SYSTEST_REG 0x0f
+#define OMAP_I2C_BUFSTAT_REG 0x10
/* I2C Interrupt Enable Register (OMAP_I2C_IE): */
#define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */
@@ -161,6 +161,7 @@ struct omap_i2c_dev {
struct device *dev;
void __iomem *base; /* virtual */
int irq;
+ int reg_shift; /* bit shift for I2C register addresses */
struct clk *iclk; /* Interface clock */
struct clk *fclk; /* Functional clock */
struct completion cmd_complete;
@@ -183,12 +184,12 @@ struct omap_i2c_dev {
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
int reg, u16 val)
{
- __raw_writew(val, i2c_dev->base + reg);
+ __raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift));
}
static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
{
- return __raw_readw(i2c_dev->base + reg);
+ return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift));
}
static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
@@ -895,6 +896,11 @@ omap_i2c_probe(struct platform_device *pdev)
dev->b_hw = 1; /* Enable hardware fixes */
}
+ if (cpu_is_omap7xx())
+ dev->reg_shift = 1;
+ else
+ dev->reg_shift = 2;
+
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
