Wolfgang Grandegger wrote:
> Kumar Gala wrote:
>> On Apr 8, 2009, at 2:25 AM, Wolfgang Grandegger wrote:
>>
>>>> So I'm a bit concerned with the output we now get:
>>>>
>>>> mpc-i2c fffe03000.i2c: clock 0 Hz (dfsrr=16 fdr=49)
>>>>
>>>> why 0? is that right?
>>> This is the backward compatibility mode using hard-coded FDR values. The
>>> output is missleading, I agree.
>>>
>>> Wolfgang.
>> Can the output be fixed. 0 Hz seemed bad to me.
>
> Of course. No info message will be printed for the legacy case
> like it was with the old driver version. I just realized a bug in the
> MPC52xx part. Will send patches tomorrow, after some more thorough testing.
The patch below fixes both issues. Ben, could you please apply it. Sorry for
the inconvenience caused.
Thanks,
Wolfgang.
[PATCH] i2c: i2c-mpc: bug fix for MPC52xx clock setting and printout
The clock setting did not work for the MPC52xx due to a stupid bug.
Furthermore, the dev info output "clock=0" for old device trees was
misleading. This patch fixes both issues.
Signed-off-by: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mpc.c | 34 ++++++++++++++++++++--------------
1 file changed, 20 insertions(+), 14 deletions(-)
Index: linux-2.6-galak/drivers/i2c/busses/i2c-mpc.c
===================================================================
--- linux-2.6-galak.orig/drivers/i2c/busses/i2c-mpc.c 2009-04-08 21:51:31.771719368 +0200
+++ linux-2.6-galak/drivers/i2c/busses/i2c-mpc.c 2009-04-09 11:18:45.812969033 +0200
@@ -164,7 +164,7 @@
return 0;
}
-#ifdef CONFIG_PPC_52xx
+#ifdef CONFIG_PPC_MPC52xx
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
@@ -188,7 +188,7 @@
int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
{
- const struct mpc52xx_i2c_divider *div = NULL;
+ const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
u32 divider;
int i;
@@ -203,7 +203,7 @@
* We want to choose an FDR/DFSR that generates an I2C bus speed that
* is equal to or lower than the requested speed.
*/
- for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) {
+ for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
div = &mpc_i2c_dividers_52xx[i];
/* Old MPC5200 rev A CPUs do not support the high bits */
if (div->fdr & 0xc0 && pvr == 0x80822011)
@@ -219,20 +219,23 @@
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x3f; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
- dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
-#else /* !CONFIG_PPC_52xx */
+#else /* !CONFIG_PPC_MPC52xx */
static void mpc_i2c_setclock_52xx(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
}
-#endif /* CONFIG_PPC_52xx*/
+#endif /* CONFIG_PPC_MPC52xx*/
#ifdef CONFIG_FSL_SOC
static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
@@ -321,14 +324,17 @@
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x1031; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
- dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
- clock, fdr >> 8, fdr & 0xff);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+ clock, fdr >> 8, fdr & 0xff);
}
#else /* !CONFIG_FSL_SOC */
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
