On Tue, Apr 7, 2009 at 10:22 PM, Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx> wrote: > > On Apr 8, 2009, at 12:16 AM, Grant Likely wrote: > >> On Tue, Apr 7, 2009 at 10:11 PM, Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx> >> wrote: >>> >>> On Apr 7, 2009, at 3:20 AM, Wolfgang Grandegger wrote: >>> >>>> This patch series makes the I2C bus speed configurable by using the >>>> I2C node property "clock-frequency". If the property is not defined, >>>> the old fixed clock settings will be used for backward compatibility. >>>> The property "fsl,preserve-clocking" allows to inherit the settings >>>> from the bootloader. Furthermore, it does some cleanup and uses the >>>> new bindings for the Socrates board: >>>> >>>> i2c: i2c-mpc: various coding style fixes >>>> i2c: i2c-mpc: use dev based printout function >>>> i2c: i2c-mpc: make I2C bus speed configurable >>> >>> It looks like Ben picked up these patches. >>> >>>> powerpc: i2c-mpc: document new FSL I2C bindings and cleanup >>>> powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board >>> >>> I would have preferred these two go via me, but it looks like the board >>> one >>> got picked up by Ben. I'll deal with the doc/binding update. >> >> hrummm. As I mentioned in my reply, I'm not convinced that the board >> one is the right thing in this case. I would have preferred it to be >> deferred. > > which part? I missed this whole thread as I had it forwarding to my > devicetree-discuss folder which I don't normally look at. Here you go: On Tue, Apr 7, 2009 at 8:43 AM, Grant Likely <grant.likely@xxxxxxxxxxxx> wrote: > On Tue, Apr 7, 2009 at 1:20 AM, Wolfgang Grandegger <wg@xxxxxxxxxxxxxx> wrote: >> Preserve I2C clock settings for the Socrates MPC8544 board. > > I had thought that the preserve-clocking property was intended for > older boards that don't currently have any method of getting the clock > setting out of u-boot. Since Socrates is a new board, U-Boot should > probably be made to fill in the real clock rate setting. > > g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
