This patch used the dev_dbg, dev_err, etc. functions for debug
and error output instead of printk and pr_debug.
Signed-off-by: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mpc.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
Index: linux-2.6-galak/drivers/i2c/busses/i2c-mpc.c
===================================================================
--- linux-2.6-galak.orig/drivers/i2c/busses/i2c-mpc.c 2009-04-07 10:09:13.271719088 +0200
+++ linux-2.6-galak/drivers/i2c/busses/i2c-mpc.c 2009-04-07 10:09:14.012720756 +0200
@@ -50,6 +50,7 @@
#define CSR_RXAK 0x01
struct mpc_i2c {
+ struct device *dev;
void __iomem *base;
u32 interrupt;
wait_queue_head_t queue;
@@ -104,7 +105,7 @@
while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
schedule();
if (time_after(jiffies, orig_jiffies + timeout)) {
- pr_debug("I2C: timeout\n");
+ dev_dbg(i2c->dev, "timeout\n");
writeccr(i2c, 0);
result = -EIO;
break;
@@ -118,7 +119,7 @@
(i2c->interrupt & CSR_MIF), timeout);
if (unlikely(!(i2c->interrupt & CSR_MIF))) {
- pr_debug("I2C: wait timeout\n");
+ dev_dbg(i2c->dev, "wait timeout\n");
writeccr(i2c, 0);
result = -ETIMEDOUT;
}
@@ -131,17 +132,17 @@
return result;
if (!(x & CSR_MCF)) {
- pr_debug("I2C: unfinished\n");
+ dev_dbg(i2c->dev, "unfinished\n");
return -EIO;
}
if (x & CSR_MAL) {
- pr_debug("I2C: MAL\n");
+ dev_dbg(i2c->dev, "MAL\n");
return -EIO;
}
if (writing && (x & CSR_RXAK)) {
- pr_debug("I2C: No RXAK\n");
+ dev_dbg(i2c->dev, "No RXAK\n");
/* generate stop */
writeccr(i2c, CCR_MEN);
return -EIO;
@@ -263,12 +264,12 @@
/* Allow bus up to 1s to become not busy */
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
if (signal_pending(current)) {
- pr_debug("I2C: Interrupted\n");
+ dev_dbg(i2c->dev, "Interrupted\n");
writeccr(i2c, 0);
return -EINTR;
}
if (time_after(jiffies, orig_jiffies + HZ)) {
- pr_debug("I2C: timeout\n");
+ dev_dbg(i2c->dev, "timeout\n");
if (readb(i2c->base + MPC_I2C_SR) ==
(CSR_MCF | CSR_MBB | CSR_RXAK))
mpc_i2c_fixup(i2c);
@@ -279,9 +280,10 @@
for (i = 0; ret >= 0 && i < num; i++) {
pmsg = &msgs[i];
- pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, pmsg->addr, i + 1, num);
+ dev_dbg(i2c->dev,
+ "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+ pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->len, pmsg->addr, i + 1, num);
if (pmsg->flags & I2C_M_RD)
ret =
mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
@@ -320,6 +322,8 @@
if (!i2c)
return -ENOMEM;
+ i2c->dev = &op->dev; /* for debug and error output */
+
if (of_get_property(op->node, "dfsrr", NULL))
i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
@@ -331,7 +335,7 @@
i2c->base = of_iomap(op->node, 0);
if (!i2c->base) {
- printk(KERN_ERR "i2c-mpc - failed to map controller\n");
+ dev_err(i2c->dev, "failed to map controller\n");
result = -ENOMEM;
goto fail_map;
}
@@ -341,8 +345,7 @@
result = request_irq(i2c->irq, mpc_i2c_isr,
IRQF_SHARED, "i2c-mpc", i2c);
if (result < 0) {
- printk(KERN_ERR
- "i2c-mpc - failed to attach interrupt\n");
+ dev_err(i2c->dev, "failed to attach interrupt\n");
goto fail_request;
}
}
@@ -357,7 +360,7 @@
result = i2c_add_adapter(&i2c->adap);
if (result < 0) {
- printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+ dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
of_register_i2c_devices(&i2c->adap, op->node);
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
