Jean Delvare wrote: > Properly set the adapter timeout value in jiffies, and then use that > value in the driver, rather than a hard-coded constant. > > Signed-off-by: Jean Delvare <khali@xxxxxxxxxxxx> > Cc: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx> > Cc: Kevin Hilman <khilman@xxxxxxxxxx> > --- > Troy, Kevin, can either of you please review, build test and run test > this patch? Thanks. > > drivers/i2c/busses/i2c-davinci.c | 8 +++----- > 1 file changed, 3 insertions(+), 5 deletions(-) > > --- linux-2.6.29-rc6.orig/drivers/i2c/busses/i2c-davinci.c 2009-02-23 08:50:47.000000000 +0100 > +++ linux-2.6.29-rc6/drivers/i2c/busses/i2c-davinci.c 2009-02-23 14:56:17.000000000 +0100 > @@ -216,7 +216,7 @@ static int i2c_davinci_wait_bus_not_busy > { > unsigned long timeout; > > - timeout = jiffies + DAVINCI_I2C_TIMEOUT; > + timeout = jiffies + dev->adapter.timeout; > while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) > & DAVINCI_I2C_STR_BB) { > if (time_after(jiffies, timeout)) { > @@ -289,7 +289,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter > davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); > > r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, > - DAVINCI_I2C_TIMEOUT); > + dev->adapter.timeout); > if (r == 0) { > dev_err(dev->dev, "controller timed out\n"); > i2c_davinci_init(dev); > @@ -546,9 +546,7 @@ static int davinci_i2c_probe(struct plat > strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name)); > adap->algo = &i2c_davinci_algo; > adap->dev.parent = &pdev->dev; > - > - /* FIXME */ > - adap->timeout = 1; > + adap->timeout = DAVINCI_I2C_TIMEOUT; > > adap->nr = pdev->id; > r = i2c_add_numbered_adapter(adap); > I tested this without issues. Thanks Troy -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html