> Add static bus numbering support to i2c-versatile
>
> From: Catalin Marinas <catalin.marinas@xxxxxxx>
>
> If dev->id is not -1, the platform code may use static bus numbering
> rather than dynamic. The patch also changes the i2c_versatile_init to a
> subsys_initcall rather than module_init to make sure it is initialised
> before the I2C devices initialisation.
>
> Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx>
> Cc: Russell King <rmk@xxxxxxxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-versatile.c | 10 ++++++++--
> 1 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
> index 4678bab..fede619 100644
> --- a/drivers/i2c/busses/i2c-versatile.c
> +++ b/drivers/i2c/busses/i2c-versatile.c
> @@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev)
> i2c->algo = i2c_versatile_algo;
> i2c->algo.data = i2c;
>
> - ret = i2c_bit_add_bus(&i2c->adap);
> + if (dev->id >= 0) {
> + /* static bus numbering */
> + i2c->adap.nr = dev->id;
> + ret = i2c_bit_add_numbered_bus(&i2c->adap);
> + } else
> + /* dynamic bus numbering */
> + ret = i2c_bit_add_bus(&i2c->adap);
> if (ret >= 0) {
> platform_set_drvdata(dev, i2c);
> return 0;
> @@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void)
> platform_driver_unregister(&i2c_versatile_driver);
> }
>
> -module_init(i2c_versatile_init);
> +subsys_initcall(i2c_versatile_init);
> module_exit(i2c_versatile_exit);
>
> MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
Acked-by: Jean Delvare <khali@xxxxxxxxxxxx>
Note that i2c-versatile is not under my jurisdiction so you will have
to push this patch through either Ben Dooks or the arm tree.
--
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
