If dev->id is not -1, the platform code may use static bus numbering rather than dynamic. The patch also changes the i2c_versatile_init to a subsys_initcall rather than module_init to make sure it is initialised before the I2C devices initialisation. Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx> Cc: Russell King <rmk@xxxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-versatile.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index 4678bab..15b5e8a 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c @@ -96,13 +96,20 @@ static int i2c_versatile_probe(struct platform_device *dev) writel(SCL | SDA, i2c->base + I2C_CONTROLS); i2c->adap.owner = THIS_MODULE; + if (dev->id >= 0) + i2c->adap.nr = dev->id; strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name)); i2c->adap.algo_data = &i2c->algo; i2c->adap.dev.parent = &dev->dev; i2c->algo = i2c_versatile_algo; i2c->algo.data = i2c; - ret = i2c_bit_add_bus(&i2c->adap); + if (dev->id >= 0) + /* static bus numbering */ + ret = i2c_bit_add_numbered_bus(&i2c->adap); + else + /* dynamic bus numbering */ + ret = i2c_bit_add_bus(&i2c->adap); if (ret >= 0) { platform_set_drvdata(dev, i2c); return 0; @@ -146,7 +153,7 @@ static void __exit i2c_versatile_exit(void) platform_driver_unregister(&i2c_versatile_driver); } -module_init(i2c_versatile_init); +subsys_initcall(i2c_versatile_init); module_exit(i2c_versatile_exit); MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html