From: Frank Seidel <frank@xxxxxxxxxxx>
According to kerneljanitors todo list all printk calls (beginning
a new line) should have an according KERN_* constant.
Those are the changes to the debug macros in the i2c subsystem
to meet this requirement. Also changing no-debug statements
to raw printks again.
Signed-off-by: Frank Seidel <frank@xxxxxxxxxxx>
---
drivers/i2c/algos/i2c-algo-pca.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -27,9 +27,12 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-pca.h>
-#define DEB1(fmt, args...) do { if (i2c_debug>=1) printk(fmt, ## args); } while(0)
-#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
-#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
+#define DEB1(fmt, args...) do { if (i2c_debug >= 1) \
+ printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB2(fmt, args...) do { if (i2c_debug >= 2) \
+ printk(KERN_DEBUG fmt, ## args); } while (0)
+#define DEB3(fmt, args...) do { if (i2c_debug >= 3) \
+ printk(KERN_DEBUG fmt, ## args); } while (0)
static int i2c_debug;
@@ -313,7 +316,7 @@ static int pca_xfer(struct i2c_adapter *
ret = curmsg;
out:
- DEB1(KERN_CRIT "}}} transfered %d/%d messages. "
+ DEB1("}}} transfered %d/%d messages. "
"status is %#04x. control is %#04x\n",
curmsg, num, pca_status(adap),
pca_get_con(adap));
@@ -347,7 +350,8 @@ static int pca_init(struct i2c_adapter *
pca_reset(pca_data);
clock = pca_clock(pca_data);
- DEB1(KERN_INFO "%s: Clock frequency is %dkHz\n", adap->name, freqs[clock]);
+ printk(KERN_INFO "%s: Clock frequency is %dkHz\n", adap->name,
+ freqs[clock]);
pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
udelay(500); /* 500 us for oscilator to stabilise */
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
