Add a callback to set the gpio configuration for the i2c device instead of a set include. This also allows the remvoal of the machine gpio and hardware files. Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx> --- drivers/i2c/busses/i2c-s3c2410.c | 11 +++-------- 1 files changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index f5efece..0aa0142 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -35,11 +35,9 @@ #include <linux/clk.h> #include <linux/cpufreq.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/io.h> -#include <mach/regs-gpio.h> #include <asm/plat-s3c/regs-iic.h> #include <asm/plat-s3c/iic.h> @@ -489,9 +487,6 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) msleep(1); } - dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n", - __raw_readl(S3C2410_GPEDAT)); - return -ETIMEDOUT; } @@ -783,12 +778,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) /* get the plafrom data */ - pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent); + pdata = s3c24xx_i2c_get_platformdata(i2c->dev); /* inititalise the gpio */ - s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA); - s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL); + if (pdata->cfg_gpio) + pdata->cfg_gpio(to_platform_device(i2c->dev)); /* write slave address */ -- 1.5.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
