Linux Kernel I2C

• Thread Index

• Re: [PATCHv3 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCHv2 2/5] misc: update bhsfh driver to Kconfig and Makefile
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCHv2 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH V3] staging: iio: light: tmd27711: Add tmd27711 proximity and ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCHv3 2/5] misc: update bh1770glc driver to Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv3 4/5] misc: update apds990x driver to Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv3 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv3 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv3 5/5] Documentation: Short descriptions for bh1770glc and apds990x drivers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv3 0/5] [PATCHv3 0/6] BH1770GLC, SFH7770 and APDS990x als / proximity sensor drivers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCHv2 2/5] misc: update bhsfh driver to Kconfig and Makefile
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCHv2 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• [PATCH V3] staging: iio: light: tmd27711: Add tmd27711 proximity and ambient light sensor driver
  • From: Donggeun Kim <dg77.kim@xxxxxxxxxxx>
• [PATCH v2] misc: adds support the FSA9480 USB Switch
  • From: Minkyu Kang <mk7.kang@xxxxxxxxxxx>
• [PATCH][RFC] Support second PCA9556 on Tyan S4985
  • From: Kris Rusocki <kszysiu@xxxxxxxxx>
• Re: [PATCHv2 4/5] misc: update apds990x driver to Kconfig and Makefile
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCHv2 2/5] misc: update bhsfh driver to Kconfig and Makefile
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: Newbie Question About Dev-Interface Method
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: Newbie Question About Dev-Interface Method
  • From: Rory Filer <rfiler@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCHv2 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCHv2 2/5] misc: update bhsfh driver to Kconfig and Makefile
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCHv2 5/5] Documentation: Short descriptions for bhsfh and apds990x drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCHv2 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 4/5] misc: update apds990x driver to Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 2/5] misc: update bhsfh driver to Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 5/5] Documentation: Short descriptions for bhsfh and apds990x drivers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 0/5] BH1770GLC, SFH7770 and APDS990x als / proximity sensor drivers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: Newbie Question About Dev-Interface Method
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v6] iio: light: Adding driver for ISL29018 ALS
  • From: rklein@xxxxxxxxxx
• RE: [PATCH v5] staging: iio: light: Adding driver for ISL29018 ALS
  • From: Rhyland Klein <rklein@xxxxxxxxxx>
• Newbie Question About Dev-Interface Method
  • From: Rory Filer <rfiler@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] staging: iio: light: Adding driver for ISL29018 ALS
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v5] iio: light: Adding driver for ISL29018 ALS
  • From: rklein@xxxxxxxxxx
• Re: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v4] iio: light: Adding driver for ISL29018 ALS
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• RE: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Jon Povey <Jon.Povey@xxxxxxxxxxxxxxx>
• Re: Please pull bjdooks' i2c-fixes
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: Please pull bjdooks' i2c-fixes
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [GIT PULL] i2c fixes for 2.6.36
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• [PATCH v4] iio: light: Adding driver for ISL29018 ALS
  • From: rklein@xxxxxxxxxx
• Re: [GIT PULL] i2c fixes for 2.6.36
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Driver for TC35894XBG keypad controller
  • From: Rabin Vincent <rabin@xxxxxx>
• Re: [PATCH] i2c: Discard warning message on device instantiation from user-space
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH v3] iio: light: Adding driver for ISL29018 ALS
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH v3] iio: light: Adding driver for ISL29018 ALS
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v3] iio: light: Adding driver for ISL29018 ALS
  • From: rklein@xxxxxxxxxx
• Re: [PATCHv2 0/4] Led driver support for LP5521 and LP5523 chips
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 1/4] leds: driver for National Semiconductor LP5521 chip
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] iio: light: Adding driver for ISL29018 ALS
  • From: Joe Perches <joe@xxxxxxxxxxx>
• RE: [PATCH v2] iio: light: Adding driver for ISL29018 ALS
  • From: Rhyland Klein <rklein@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: Adding driver for ISL29018 ALS
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v2] iio: light: Adding driver for ISL29018 ALS
  • From: rklein@xxxxxxxxxx
• Re: [PATCH] Driver for TC35894XBG keypad controller
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Driver for TC35894XBG keypad controller
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Michal Marek <mmarek@xxxxxxx>
• [PATCH] i2c/mux: Driver for PCA9541 I2C Master Selector
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] i2c: Discard warning message on device instantiation from user-space
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 5/5] Documentation: Short descriptions for bhsfh and apds990x drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] Documentation: Short descriptions for bhsfh and apds990x drivers
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 5/5] Documentation: Short descriptions for bhsfh and apds990x drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] misc: Driver for bh1770glc / sfh7770 ALS and proximity sensor
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 5/5] Documentation: Short descriptions for bhsfh and apds990x drivers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 2/5] misc: update bhsfh driver to Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 0/5] BH1770GLC, SFH7770 and APDS990x als / proximity sensor drivers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 3/5] misc: Driver for APDS990X ALS and proximity sensors
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 4/5] misc: update apds990x driver to Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2.6.35.4] irq: irq and pci_ids patch for Intel Patsburg
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH 2.6.35.4] irq: irq and pci_ids patch for Intel Patsburg
  • From: Seth Heasley <seth.heasley@xxxxxxxxx>
• Re: [PATCH] i2c: Fix Kconfig dependencies
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH V3 RESEND5] i2c-imx: do not allow interruptions when waiting for I2C to complete
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH] i2c: Fix Kconfig dependencies
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [lm-sensors] [RFC PATCH 8/9] hwmon: lis3: use block read to access data registers
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 8/9] hwmon: lis3: use block read to access data registers
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 6/9] hwmon: lis3: New parameters to platform data
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 2/9] hwmon: lis3: regulator control
  • From: David Lutolf <david@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 2/9] hwmon: lis3: regulator control
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/9] hwmon: lis3: pm_runtime support
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 2/9] hwmon: lis3: regulator control
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/9] hwmon: lis3: pm_runtime support
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 5/9] hwmon: lis3: Power on corrections
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 2/9] hwmon: lis3: regulator control
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/9] hwmon: lis3: pm_runtime support
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 0/9] lis3 accelerator feature update
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 0/9] lis3 accelerator feature update
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [RFC PATCH 0/9] lis3 accelerator feature update
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/9] lis3 accelerator feature update
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [GIT PULL] i2c fixes for 2.6.36
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [GIT PULL] i2c fixes for 2.6.36
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [GIT PULL] i2c fixes for 2.6.36
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [GIT PULL] i2c fixes for 2.6.36
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH 7/8] drivers/i2c/busses/i2c-amd8111.c: Fix unsigned return type
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [GIT PULL] i2c fixes for 2.6.36
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [RFC PATCH 6/9] hwmon: lis3: New parameters to platform data
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 8/9] hwmon: lis3: use block read to access data registers
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 0/9] lis3 accelerator feature update
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 9/9] hwmon: lis3: Enhance lis3 selftest with IRQ line test
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 3/9] hwmon: lis3: Cleanup interrupt handling
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 5/9] hwmon: lis3: Power on corrections
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 7/9] hwmon: lis3: Adjust fuzziness for 8 bit device
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 1/9] hwmon: lis3: pm_runtime support
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 4/9] hwmon: lis3: Update coordinates at polled device open
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [RFC PATCH 2/9] hwmon: lis3: regulator control
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 1/1] iio: light: Adding driver for ISL29018 ALS
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: Please pull bjdooks' i2c-fixes
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [patch 1/1] i2c-s3c2410: Enable i2c clock only when doing some transfert
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• [PATCH 1/1] iio: light: Adding driver for ISL29018 ALS
  • From: rklein@xxxxxxxxxx
• Please pull bjdooks' i2c-fixes
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH (Option 1)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 7/8] drivers/i2c/busses/i2c-amd8111.c: Fix unsigned return type
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH RESEND] drivers: s3c2410-i2c: fix calculation of SDA line delay
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] drivers: s3c2410-i2c: fix calculation of SDA line delay
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• [PATCH v4 1/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 7/8] drivers/i2c/busses/i2c-amd8111.c: Fix unsigned return type
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH 7/8] drivers/i2c/busses/i2c-amd8111.c: Fix unsigned return type
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH (Option 2)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH (Option 1)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 05/24] i2c: change to new flag variable
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] Add ALS drivers for the apds9802als
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] Add ALS drivers for the apds9802als
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Race in i2c_new_device()
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] I2C: runtime: Fix checks which make legacy suspend to never get called
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCHv2 1/4] leds: driver for National Semiconductor LP5521 chip
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 3/4] leds: Update LP552x support Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 2/4] leds: Driver for National Semiconductors LP5523 chip
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 0/4] Led driver support for LP5521 and LP5523 chips
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCHv2 4/4] Documentation: led drivers lp5521 and lp5523
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 0/1] misc: Add Tunnel creek In-Vehicle I2C loader driver
  • From: Richard Röjfors <richard.rojfors@xxxxxxxxxxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] fix PCA waitforcompletion() return value
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH (Option 1)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH (Option 1)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH (Option 1)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] i2c-mv64xxx: use subsys_initcall for early initialization
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] fix PCA waitforcompletion() return value
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] I2C: runtime: Fix checks which make legacy suspend to never get called
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [SOLVED] wnv_cs.c: i2c question
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Led driver support for LP5521 and LP5523 chips
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] Add ALS drivers for the apds9802als
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] Add ALS drivers for the apds9802als
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] Add ALS drivers for the apds9802als
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH v4 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: Driver for pca9541 bus master selector
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] Add ALS drivers for the apds9802als
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Driver for pca9541 bus master selector
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 0/4] Led driver support for LP5521 and LP5523 chips
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add ALS drivers for the apds9802als
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCH 2/2] apds9802als: fix als sensing range value
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• [PATCH 1/2] Add ALS drivers for the apds9802als
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] power: bq20z75: Adding Devicekit Power support
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH V3 RESEND4] i2c-imx: do not allow interruptions when waiting for I2C to complete
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Led driver support for LP5521 and LP5523 chips
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: AT88SC
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• Re: [PATCH] misc: adds support the FSA9480 USB Switch
  • From: Minkyu Kang <promsoft@xxxxxxxxx>
• Re: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] MIPS: I2C: Return -ETIMEDOUT in octeon_i2c_wait() on timeout
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] MIPS: I2C: Return -ETIMEDOUT in octeon_i2c_wait() on timeout
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] I2C: runtime: Fix checks which make legacy suspend to never get called
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: Pavel Machek <pavel@xxxxxx>
• AT88SC
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: davinci: bus recovery procedure to clear the bus
  • From: Philby John <pjohn@xxxxxxxxxx>
• Re: [PATCH 2/4] leds: Driver for National Semiconductors LP5523 chip
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• Re: [PATCH] MIPS: I2C: Return -ETIMEDOUT in octeon_i2c_wait() on timeout
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] MIPS: I2C: Return -ETIMEDOUT in octeon_i2c_wait() on timeout
  • From: Bernhard Walle <walle@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] leds: Driver for National Semiconductors LP5523 chip
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• RE: [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Sundar R IYER <sundar.iyer@xxxxxxxxxxxxxx>
• RE: [PATCH 0/4] Led driver support for LP5521 and LP5523 chips
  • From: <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 3/4] i2c-nomadik: support smbus emulation
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• Re: [PATCH 3/4] i2c-nomadik: support smbus emulation
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• wnv_cs.c: i2c question
  • From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] i2c: Remove unneeded inclusions of <linux/i2c-id.h>
  • From: Dave Airlie <airlied@xxxxxxxx>
• Re: [PATCH 05/24] i2c: change to new flag variable
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: [PATCH 05/24] i2c: change to new flag variable
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 05/24] i2c: change to new flag variable
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• RE: [PATCH 2.6.35.4] irq: irq and pci_ids patch for Intel
  • From: "Heasley, Seth" <seth.heasley@xxxxxxxxx>
• Re: [PATCH 2.6.35.4] irq: irq and pci_ids patch for Intel
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 05/24] i2c: change to new flag variable
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2.6.35.4] irq: irq and pci_ids patch for Intel
  • From: Seth Heasley <seth.heasley@xxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• [PATCH (Option 2)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH (Option 1)] of/i2c: fix module load order issue caused by of_i2c.c
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH 05/24] i2c: change to new flag variable
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
• [PATCH V3 RESEND4] i2c-imx: do not allow interruptions when waiting for I2C to complete
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Mikael Pettersson <mikpe@xxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/4] i2c-nomadik: support smbus emulation
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Mikael Pettersson <mikpe@xxxxxxxx>
• Re: [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-mv64xxx: use subsys_initcall for early initialization
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [BUG 2.6.36-rc5] of_i2c.ko <-> i2c-core.ko dependency loop
  • From: Mikael Pettersson <mikpe@xxxxxxxx>
• Re: idr_get_new_exact ?
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: idr_get_new_exact ?
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Remove unneeded inclusions of <linux/i2c-id.h>
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• [PATCH] i2c: Remove unneeded inclusions of <linux/i2c-id.h>
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-mv64xxx: use subsys_initcall for early initialization
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: [PATCH] I2C: various updates to the Nomadik I2C controller
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• [PATCH 4/4] i2c-nomadik: fixup bus delays
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• [PATCH 3/4] i2c-nomadik: support smbus emulation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• [PATCH 1/4] i2c-nomadik: documentation fixes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• [PATCH 2/4] i2c-nomadik: dynamic clocking
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] Documentation: led drivers lp5521 and lp5523
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: [PATCH] fix PCA waitforcompletion() return value
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] fix PCA waitforcompletion() return value
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] fix PCA waitforcompletion() return value
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: [PATCH] fix i2c_pca_pf_waitforcompletion() return value
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] fix i2c_pca_pf_waitforcompletion() return value
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] fix i2c_pca_pf_waitforcompletion() return value
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Please pull bjdooks' i2c-fixes
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] i2c-davinci: Fix use of default platform data if none supplied.
  • From: Michael Williamson <michael.williamson@xxxxxxxxxxxxxxxx>
• Re: [PATCH] I2C: various updates to the Nomadik I2C controller
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] i2c-davinci: Fix use of default platform data if none supplied.
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 1/4] leds: driver for National Semiconductor LP5521 chip
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] i2c-omap: Make sure i2c bus is free before setting it to idle
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• [PATCH 1/1] power: bq20z75: Adding Devicekit Power support
  • From: rklein@xxxxxxxxxx
• Re: [PATCH v2] fix i2c_pca_pf_waitforcompletion() return value
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 1/5] OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 3/5] OMAP4: hwmod: add I2C hwmods for OMAP4430
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 4/5] OMAP: I2C: split device registration and convert OMAP2+ to omap_device
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 2/5] OMAP3: hwmod: add I2C hwmods for OMAP3430
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 0/5] Convert I2C driver to use omap_device/runtime PM
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH] fix i2c_pca_pf_waitforcompletion() return value
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• [PATCH v2] fix i2c_pca_pf_waitforcompletion() return value
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] at24: add i2c_driver struct member for at24_driver, and reduce the priority of at24_init
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/1] at24: add i2c_driver struct member for at24_driver, and reduce the priority of at24_init
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] at24: add i2c_driver struct member for at24_driver, and reduce the priority of at24_init
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/1] at24: add i2c_driver struct member for at24_driver, and reduce the priority of at24_init
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH 1/1] at24: add i2c_driver struct member for at24_driver, and reduce the priority of at24_init
  • From: jgq516@xxxxxxxxx
• Re: [PATCH] fix i2c_pca_pf_waitforcompletion() return value
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH v4] i2c: davinci: Fix race when setting up for TX
  • From: Jon Povey <jon.povey@xxxxxxxxxxxxxxx>
• Re: [dm-devel] idr_get_new_exact ?
  • From: Alasdair G Kergon <agk@xxxxxxxxxx>
• Re: idr_get_new_exact ?
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: [PATCH v3] i2c: davinci: Fix race when setting up for TX
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• Re: idr_get_new_exact ?
  • From: Roland Dreier <rdreier@xxxxxxxxx>
• Re: idr_get_new_exact ?
  • From: Steve Wise <swise@xxxxxxxxxxxxxxxxxxxxx>
• Re: idr_get_new_exact ?
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• idr_get_new_exact ?
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] fix i2c_pca_pf_waitforcompletion() return value
  • From: Yegor Yefremov <yegor_sub1@xxxxxxxxxxxxxxxx>
• RE: [PATCH v3] i2c: davinci: Fix race when setting up for TX
  • From: Jon Povey <Jon.Povey@xxxxxxxxxxxxxxx>
• Re: [PATCH] misc: adds support the FSA9480 USB Switch
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH] misc: adds support the FSA9480 USB Switch
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] misc: adds support the FSA9480 USB Switch
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] misc: adds support the FSA9480 USB Switch
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: davinci: Fix race when setting up for TX
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] i2c: davinci: Fix race when setting up for TX
  • From: Jon Povey <jon.povey@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: davinci: Fix race when setting up for TX
  • From: Jon Povey <jon.povey@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Make sure i2c bus is free before setting it to idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: davinci: Fix race when setting up for TX
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: davinci: Fix race when setting up for TX
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: davinci: Fix race when setting up for TX
  • From: Jon Povey <jon.povey@xxxxxxxxxxxxxxx>
• Re: [PATCH V2] staging: iio: tmd2771x: Add tmd2771x proximity and ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCH 3/4] leds: Update LP552x support Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 0/4] Led driver support for LP5521 and LP5523 chips
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 4/4] Documentation: led drivers lp5521 and lp5523
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 2/4] leds: Driver for National Semiconductors LP5523 chip
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 1/4] leds: driver for National Semiconductor LP5521 chip
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [MeeGo-Dev][PATCH v2] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-mv64xxx: use subsys_initcall for early initialization
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-mv64xxx: use subsys_initcall for early initialization
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH V3 RESEND3] i2c-imx: do not allow interruptions when waiting for I2C to complete
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C-GPIO: Don't include the asm/gpio.h directly
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH V2] staging: iio: tmd2771x: Add tmd2771x proximity and ambient light sensor driver
  • From: Donggeun Kim <dg77.kim@xxxxxxxxxxx>
• Re: [PATCH] i2c-mv64xxx: use subsys_initcall for early initialization
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] I2C-GPIO: Don't include the asm/gpio.h directly
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH v4] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Jonathan Cameron <kernel@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH] I2C-GPIO: Don't include the asm/gpio.h directly
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• [PATCH v4] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Jonathan Cameron <arm@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 05/25] drivers/i2c: Use static const char arrays
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: Andy Isaacson <adi@xxxxxxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• [PATCH] i2c-mv64xxx: use subsys_initcall for early initialization
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: Andy Isaacson <adi@xxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: tmd2771x: Add tmd2771x proximity and ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH] staging: iio: tmd2771x: Add tmd2771x proximity and ambient light sensor driver
  • From: Donggeun Kim <dg77.kim@xxxxxxxxxxx>
• RE: [PATCH] staging: iio: tmd2771x: Add tmd2771x proximity and ambient light sensor driver
  • From: <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Sundar <sunder.svit@xxxxxxxxx>
• [PATCH] I2C: various updates to the Nomadik I2C controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: tmd2771x: Add tmd2771x proximity and ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCH] staging: iio: tmd2771x: Add tmd2771x proximity and ambient light sensor driver
  • From: Donggeun Kim <dg77.kim@xxxxxxxxxxx>
• RE: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: "Murphy, Dan" <dmurphy@xxxxxx>
• [PATCH 0/1] misc: Add Tunnel creek In-Vehicle I2C loader driver
  • From: Richard Röjfors <richard.rojfors@xxxxxxxxxxxxxx>
• [PATCH 1/1] misc: Add Tunnel creek In-Vehicle I2C loader driver
  • From: Richard Röjfors <richard.rojfors@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCH 7/8] drivers/i2c/busses/i2c-amd8111.c: Fix unsigned return type
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH 7/8] drivers/i2c/busses/i2c-amd8111.c: Fix unsigned return type
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 7/8] drivers/i2c/busses/i2c-amd8111.c: Fix unsigned return type
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH v3] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH v2 1/2] msm: i2c: Add msm_qup_i2c.h
  • From: David Brown <davidb@xxxxxxxxxxxxxx>
• RE: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Andrew Chew <AChew@xxxxxxxxxx>
• Re: [PATCH 4/8] drivers/i2c/busses/i2c-pasemi.c: Fix unsigned return type
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCH v3] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• [PATCH v3] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Rhyland@xxxxxxxxxxxxxxx, Klein@xxxxxxxxxxxxxxx
• [PATCH 4/8] drivers/i2c/busses/i2c-pasemi.c: Fix unsigned return type
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Rhyland Klein <rklein@xxxxxxxxxx>
• Re: [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Rhyland Klein <rklein@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCH] i2c-davinci: Fix use of default platform data if none supplied.
  • From: Michael Williamson <michael.williamson@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2] I2C: Fix for suspend/resume issue in i2c-core
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH V2] I2C: Fix for suspend/resume issue in i2c-core
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH V2] I2C: Fix for suspend/resume issue in i2c-core
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 2/2] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Linus WALLEIJ <linus.walleij@xxxxxxxxxxxxxx>
• RE: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Linus WALLEIJ <linus.walleij@xxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Joe Perches <joe@xxxxxxxxxxx>
• RE: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: <samu.p.onkalo@xxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] msm: i2c: Add msm_qup_i2c.h
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: achew@xxxxxxxxxx
• Re: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCH v2 2/2] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH] [ARM] tegra: Add i2c support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Re: [PATCH] [ARM] tegra: Add i2c support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• RE: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Andrew Chew <AChew@xxxxxxxxxx>
• Re: [PATCH] [ARM] tegra: Add i2c support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [ARM] tegra: Add i2c support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH] [ARM] tegra: Add i2c support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• [PATCH 1/1] iio: ak8975: Add Ak8975 magnetometer sensor
  • From: achew@xxxxxxxxxx
• Re: [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• [PATCH v2] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: rklein@xxxxxxxxxx
• Re: i2c Mux support for LTC4306 multiplexers
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: i2c Mux support for LTC4306 multiplexers
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: i2c Mux support for LTC4306 multiplexers
  • From: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• RE: [PATCH 1/1] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Rhyland Klein <rklein@xxxxxxxxxx>
• RE: [PATCH 1/1] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Rhyland Klein <rklein@xxxxxxxxxx>
• Re: [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• Re: [MeeGo-Dev][PATCH] Topcliff: Update PCH_I2C driver to 2.6.35
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [CORRECTED] I2C driver supporting Moorestown and Medfield platform
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• preparing new pull (will include new drivers)
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH/RFC] I2C host adapter slave support and ppc/mpc driver
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH] i2c: i2c-sh_mobile irq rollback fix
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 1/1] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] misc: adds support the FSA9480 USB Switch
  • From: Minkyu Kang <mk7.kang@xxxxxxxxxxx>
• Re: [PATCH 1/1] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Sundar <sunder.svit@xxxxxxxxx>
• Re: [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: I2C driver modification for BH1710FVC Ambient Light Sensor
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• I2C driver modification for BH1710FVC Ambient Light Sensor
  • From: Rogério de Souza Moraes <rogerio.souza@xxxxxxxxx>
• [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH] I2C: Fix for suspend/resume issue in i2c-core
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Sundar <sunder.svit@xxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Jonathan Cameron <kernel@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] power supply: add driver for TI BQ20Z75 gas gauge IC
  • From: rklein@xxxxxxxxxx
• Re: [patch 1/1] i2c-s3c2410: Enable i2c clock only when doing some transfert
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Onkalo Samu <samu.p.onkalo@xxxxxxxxx>
• [PATCH] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] drivers: misc: ak8974 / ami305 magnetometer driver
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 3/3] Documentation: Documentation for ak8974 magnetometer chip driver
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 2/3] drivers: misc: ak8974 support to Kconfig and Makefile
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• [PATCH 0/3] ak8974 / ami305 magnetometer driver
  • From: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
• Re: [PATCH 1/1] drivers/misc/akm8975: Add compass sensor driver
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers/misc/akm8975: Add compass sensor driver
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• Re: [PATCH 1/1] drivers/misc/akm8975: Add compass sensor driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/1] drivers/misc/akm8975: Add compass sensor driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [lm-sensors] [PATCH] hwmon: Add tempX_emergency to sysfs ABI
  • From: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
• RE: [PATCH 1/1] drivers/misc/akm8975: Add compass sensor driver
  • From: Andrew Chew <AChew@xxxxxxxxxx>
• Re: [PATCH 1/1] drivers/misc/akm8975: Add compass sensor driver
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] drivers/misc/akm8975: Add compass sensor driver
  • From: Andrew@xxxxxxxxxxxxxxx, Chew@xxxxxxxxxxxxxxx
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [lm-sensors] [PATCH] hwmon: Add tempX_emergency to sysfs ABI
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [lm-sensors] [PATCH] hwmon: Add tempX_emergency to sysfs ABI
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [lm-sensors] [PATCH] hwmon: Add tempX_emergency to sysfs ABI
  • From: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx>
• [PATCH] hwmon: Fix checkpatch errors in lm90 driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] hwmon: Add tempX_emergency to sysfs ABI
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• Re: [PATCH] i2c-omap: Make sure i2c bus is free before setting it to idle
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] i2c: remove obsolete cleanup for clientdata
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: remove obsolete cleanup for clientdata
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH] i2c: remove obsolete cleanup for clientdata
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: remove obsolete cleanup for clientdata
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: remove obsolete cleanup for clientdata
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH RFC 1/1] MISC: Broadcom BCM4751 GPS driver
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• [PATCH RFC 0/1] MISC: Broadcom BCM4751 GPS driver
  • From: "Matti J. Aaltonen" <matti.j.aaltonen@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: Let i2c_parent_is_i2c_adapter return the parent adapter
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• [PATCH 2/2] i2c: Let i2c_parent_is_i2c_adapter return the parent adapter
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/2] i2c: Simplify i2c_parent_is_i2c_adapter
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-tools: do not fail opening bus if /dev/i2c is not a directory
  • From: Florian Fainelli <ffainelli@xxxxxxxxxx>
• Re: [PATCH] i2c-tools: do not fail opening bus if /dev/i2c is not a directory
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-sh_mobile irq rollback fix
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] i2c: i2c-sh_mobile irq rollback fix
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-sh_mobile irq rollback fix
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PULL] Pull request for bjdooks' for-linus/i2c-2636 tree
  • From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• [GIT PULL] i2c updates for 2.6.36
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] davinci: I2C: Adding bus frequency as module parameter
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] davinci: I2C: Adding bus frequency as module parameter
  • From: vishwa <vishwanath.k@xxxxxx>
• Re: i2c list archive mbox
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• i2c list archive mbox
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• current state of bjdooks' i2c-next
  • From: Ben Dooks <ben-linuxn@xxxxxxxxx>
• Re: [PATCH 0/6] i2c: davinci updates for 2.6.35
  • From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
• Re: [PATCH 0/6] i2c: davinci updates for 2.6.35
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Status of multiplexed i2c support
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] [ARM] tegra: Add i2c support
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-sh_mobile irq rollback fix
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Status of multiplexed i2c support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: exclusive access to I2C device
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [CORRECTED] I2C driver supporting Moorestown and Medfield platform
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• i2c mbox
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] i2c: Enable NXP LPC support in Kconfig
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c/nuc900: add i2c driver support for nuc900
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [CORRECTED] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [CORRECTED] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [CORRECTED] I2C driver supporting Moorestown and Medfield platform
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] i2c: Enable NXP LPC support in Kconfig
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [CORRECTED] I2C driver supporting Moorestown and Medfield platform
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• [PATCH] i2c: Enable NXP LPC support in Kconfig
  • From: Kevin Wells <wellsk40@xxxxxxxxx>
• Re: [PATCH] i2c-nomadik: add SMBUS_EMUL functionality
  • From: srinidhi <srinidhi.kasagar@xxxxxxxxxxxxxx>
• apologies for merge and review delays
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• RE: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: "Kevin McNeely" <Kevin.McNeely@xxxxxxxxxxx>
• RE: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: "Kevin McNeely" <Kevin.McNeely@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C for Samsung SoCs
  • From: Ben Dooks <ben@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-sh_mobile irq rollback fix
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• [CORRECTED] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• [PATCH] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] i2c: davinci updates for 2.6.35
  • From: Jack Daniel <wanders.thirst@xxxxxxxxx>
• [PATCH] i2c: i2c-sh_mobile irq rollback fix
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• Re: [PATCH] [ARM] tegra: Add i2c support
  • From: Mike Rapoport <mike.rapoport@xxxxxxxxx>
• Re: [PATCH] [ARM] tegra: Add i2c support
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH v3 3/3] ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C for Samsung SoCs
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C for Samsung SoCs
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• RE: [PATCH v3 3/3] ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C for Samsung SoCs
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH] [ARM] tegra: Add i2c support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C for Samsung SoCs
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• [PATCH] i2c: fix linux/i2c.h kernel-doc warnings
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• [PATCH v3 3/3] ARM: SAMSUNG: i2c/busses: Add HAVE_S3C2410_I2C option to include I2C for Samsung SoCs
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Pavel Machek <pavel@xxxxxx>
• RE: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: "Kevin McNeely" <Kevin.McNeely@xxxxxxxxxxx>
• [PATCH/RFC] I2C host adapter slave support and ppc/mpc driver
  • From: "Fillod Stephane" <stephane.fillod@xxxxxxxxxxxxxxx>
• [PATCH ] i2c: adapt i2c_ram struct according to MPC8272
  • From: Holger brunck <holger.brunck@xxxxxxxxxxx>
• Re: [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: srinidhi <srinidhi.kasagar@xxxxxxxxxxxxxx>
• i2cdetect outputs on Intel x58 chipsets wanted
  • From: Fernand LONE SANG <fernand.lone-sang@xxxxxxx>
• [PATCH] i2c-davinci: use schedule_timeout_uninterruptible()
  • From: Kulikov Vasiliy <segooon@xxxxxxxxx>
• Re: [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Daniel Glöckner <dg@xxxxxxxxx>
• Re: [patch 1/1] i2c-s3c2410: Enable i2c clock only when doing some transfert
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• [PATCH] i2c: QUP based bus driver for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH v4] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Greg Bean <gbean@xxxxxxxxxxxxxx>
• Re: [PATCH v4] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• [PATCH v4] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Gregory Bean <gbean@xxxxxxxxxxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Rodolfo Giometti <giometti@xxxxxxxxxxxx>
• [PATCH] i2c: Single-wire Serial Bus Interface for Qualcomm MSM chipsets
  • From: Kenneth Heitke <kheitke@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• RE: [PATCH v2 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: S5PV210: Add support for I2C devices on SMDKV210 and SMDKC110
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• [PATCH v2 2/3] ARM: S5PV210: Add support for I2C devices on SMDKV210 and SMDKC110
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH v2 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• RE: [PATCH 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH v3] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Marc Zyngier <maz@xxxxxxxxxxxxxxx>
• [PATCH] I2C driver of Topcliff PCH
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• Status of multiplexed i2c support
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH v3] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Gregory Bean <gbean@xxxxxxxxxxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• HELP: Interface a CMOS sensor with the DM355 (fwd)
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• [PATCH] i2c: Use a separate mutex for userspace client lists
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: "Masayuki Ohtake" <masa-korg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH] I2C driver supporting Moorestown and Medfield platform
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c/nuc900: add i2c driver support for nuc900
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] I2C driver supporting Moorestown and Medfield platform
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-pxa: fix compiler warning, due to missing const
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH V3 RESEND2] i2c-imx: do not allow interruptions when waiting for I2C to complete
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3] ARM: S5PV210: Add support for I2C devices on SMDKV210 and SMDKC110
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• RE: [PATCH 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: S5PV210: Add support for I2C devices on SMDKV210 and SMDKC110
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add support I2C devices on SMDK6440, SMDKC110 and SMDKV210
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• [PATCH 2/3] ARM: S5PV210: Add support for I2C devices on SMDKV210 and SMDKC110
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 1/3] ARM: S5P6440: Add support for I2C channel 0 and 1 on SMDK6440
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 3/3] i2c/busses: Select I2C bus support for S5PV210 and S5P6440.
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• [PATCH 0/3] Add support I2C devices on SMDK6440, SMDKC110 and SMDKV210
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH v2] i2c/nuc900: add i2c driver support for nuc900
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• Re: [PATCH] I2C driver of Topcliff PCH
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [patch 1/1] i2c-s3c2410: Enable i2c clock only when doing some transfert
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• [PATCH] I2C driver of Topcliff PCH
  • From: Masayuki Ohtak <masa-korg@xxxxxxxxxxxxxxx>
• [PATCH V3 RESEND] i2c-imx: do not allow interruptions when waiting for I2C to complete
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c-pxa: fix compiler warning, due to missing const
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH 0/6] i2c: davinci updates for 2.6.35
  • From: Jack Daniel <wanders.thirst@xxxxxxxxx>
• Re: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• I2C-Bus at QM57 not detected
  • From: florian.wohlrab@xxxxxxx
• Re: [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• [PATCH] i2c-nomadik: add SMBUS_EMUL functionality
  • From: srinidhi <srinidhi.kasagar@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/checkpatch.pl: Add strict test of logical test continuations at beginning of line
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] scripts/checkpatch.pl: Add strict test of logical test continuations at beginning of line
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] scripts/checkpatch.pl: Add strict test of logical test continuations at beginning of line
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] scripts/checkpatch.pl: Add strict test of logical test continuations at beginning of line
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v2] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Fix autoloading of fschmd on recent Fujitsu machines
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [GIT PULL] i2c fixes for 2.6.35
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• [Patch v3] i2c: Multiplexed I2C bus core support
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• [PATCH v2] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Gregory Bean <gbean@xxxxxxxxxxxxxx>
• [PATCH] hwmon: Fix autoloading of fschmd on recent Fujitsu machines
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] hwmon: Add support for JEDEC JC 42.4 compliant temperature sensors
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
  • From: Trilok Soni <tsoni@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC v2 4/4] hwmon: sysfs API updates
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH/RFC v2 4/4] hwmon: sysfs API updates
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH] rtc: add support for DS3232 RTC
  • From: Martyn Welch <martyn.welch@xxxxxx>
• RE: [PATCH] rtc: add support for DS3232 RTC
  • From: "Zang Roy-R61911" <r61911@xxxxxxxxxxxxx>
• Re: [PATCH] rtc: add support for DS3232 RTC
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH/RFC v2 4/4] hwmon: sysfs API updates
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] rtc: add support for DS3232 RTC
  • From: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx>
• [PATCH/RFC v2 3/4] hwmon: pmbus driver documentation
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC v2 2/4] hwmon: i2c PMBus device emulator
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC v2 4/4] hwmon: sysfs API updates
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC v2 1/4] hwmon: PMBus device driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC v2 0/4] hwmon: PMBus device driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH] i2c: add generic I2C multiplexer using gpio api
  • From: Peter Korsgaard <peter.korsgaard@xxxxxxxxx>
• Re: [PATCH/RFC 2/4] hwmon: PMBus device driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH/RFC 2/4] hwmon: PMBus device driver
  • From: Jonathan Cameron <kernel@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH/RFC 4/4] hwmon: sysfs API updates
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC 1/4] hwmon: i2c PMBus device emulator
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC 0/4] hwmon: PMBus device driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC 3/4] hwmon: pmbus driver documentation
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• [PATCH/RFC 2/4] hwmon: PMBus device driver
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c/nuc900: add i2c driver support for nuc900
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• Re: [PATCH] i2c/mips: Fix error return codes from Sibyte i2c bus driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c/mips: Fix error return codes from Sibyte i2c bus driver
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: reading i2c eeprom early in boot
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v2] i2c/nuc900: add i2c driver support for nuc900
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• [PATCH 1/3] of/i2c: Generalize OF support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>