RE: [EXTERNAL] Re: [PATCH v3 1/2] PCI: hv: Make the code arch neutral by adding arch specific interfaces

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sunday, October 24, 2021 5:17 AM,
Marc Zyngier <maz@xxxxxxxxxx> wrote:

> > From: Sunil Muthuswamy <sunilmut@xxxxxxxxxxxxx>
> >
> > Encapsulate arch dependencies in Hyper-V vPCI through a set of interfaces,
> > listed below. Adding these arch specific interfaces will allow for an
> > implementation for other arch, such as ARM64.
> >
> > Implement the interfaces for X64, which is essentially just moving over the
> > current implementation.
> 
> Nit: use architecture names and capitalisation that match their use in
> the kernel (arm64, x86) instead of the MS-specific lingo.

Thanks, will fix in v4.

> > +
> > +#ifdef CONFIG_X86_64
> > +int hv_pci_irqchip_init(struct irq_domain **parent_domain,
> > +			bool *fasteoi_handler,
> > +			u8 *delivery_mode)
> > +{
> > +	*parent_domain = x86_vector_domain;
> > +	*fasteoi_handler = false;
> > +	*delivery_mode = APIC_DELIVERY_MODE_FIXED;
> > +
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL(hv_pci_irqchip_init);
> 
> Why do you need to export any of these symbols? Even if the two
> objects are compiled separately, there is absolutely no need to make
> them two separate modules.
> 
> Also, returning 3 values like this makes little sense. Pass a pointer
> to the structure that requires them and populate it as required. Or
> simply #define those that are constants.

Thanks. In v4, I am moving everything back to pci-hyperv.c and this
will get addressed as part of that.

> > +
> > +void hv_pci_irqchip_free(void) {}
> > +EXPORT_SYMBOL(hv_pci_irqchip_free);
> > +
> > +unsigned int hv_msi_get_int_vector(struct irq_data *data)
> > +{
> > +	struct irq_cfg *cfg = irqd_cfg(data);
> > +
> > +	return cfg->vector;
> > +}
> > +EXPORT_SYMBOL(hv_msi_get_int_vector);
> > +
> > +void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
> > +				struct msi_desc *msi_desc)
> > +{
> > +	msi_entry->address.as_uint32 = msi_desc->msg.address_lo;
> > +	msi_entry->data.as_uint32 = msi_desc->msg.data;
> > +}
> > +EXPORT_SYMBOL(hv_set_msi_entry_from_desc);
> > +
> > +int hv_msi_prepare(struct irq_domain *domain, struct device *dev,
> > +		   int nvec, msi_alloc_info_t *info)
> > +{
> > +	return pci_msi_prepare(domain, dev, nvec, info);
> > +}
> > +EXPORT_SYMBOL(hv_msi_prepare);
> 
> This looks like a very unnecessary level of indirection, given that
> you end-up with an empty callback in the arm64 code. The following
> works just as well and avoids useless callbacks:
> 
> #ifdef CONFIG_ARM64
> #define pci_msi_prepare	NULL
> #endif

Will get addressed in v4.

> >
> > +static struct irq_domain *parent_domain;
> > +static bool fasteoi;
> > +static u8 delivery_mode;
> 
> See my earlier comment about how clumsy this is.

Thanks. Getting fixed in v4 as part of moving things back to pci-hyperv.c

> >  	/*
> > -	 * Honoring apic->delivery_mode set to APIC_DELIVERY_MODE_FIXED
> by
> > -	 * setting the HV_DEVICE_INTERRUPT_TARGET_MULTICAST flag results
> in a
> > +	 * For x64, honoring apic->delivery_mode set to
> > +	 * APIC_DELIVERY_MODE_FIXED by setting the
> > +	 * HV_DEVICE_INTERRUPT_TARGET_MULTICAST flag results in a
> >  	 * spurious interrupt storm. Not doing so does not seem to have a
> >  	 * negative effect (yet?).
> 
> And what does it mean on other architectures?

The same applies to other architectures. Will address the comment update
In v4.

> >  	 */
> > @@ -1347,7 +1349,7 @@ static u32 hv_compose_msi_req_v1(
> >  	int_pkt->wslot.slot = slot;
> >  	int_pkt->int_desc.vector = vector;
> >  	int_pkt->int_desc.vector_count = 1;
> > -	int_pkt->int_desc.delivery_mode = APIC_DELIVERY_MODE_FIXED;
> > +	int_pkt->int_desc.delivery_mode = delivery_mode;
> >
> >  	/*
> >  	 * Create MSI w/ dummy vCPU set, overwritten by subsequent retarget
> in
> > @@ -1377,7 +1379,7 @@ static u32 hv_compose_msi_req_v2(
> >  	int_pkt->wslot.slot = slot;
> >  	int_pkt->int_desc.vector = vector;
> >  	int_pkt->int_desc.vector_count = 1;
> > -	int_pkt->int_desc.delivery_mode = APIC_DELIVERY_MODE_FIXED;
> > +	int_pkt->int_desc.delivery_mode = delivery_mode;
> >  	cpu = hv_compose_msi_req_get_cpu(affinity);
> >  	int_pkt->int_desc.processor_array[0] =
> >  		hv_cpu_number_to_vp_number(cpu);
> > @@ -1397,7 +1399,7 @@ static u32 hv_compose_msi_req_v3(
> >  	int_pkt->int_desc.vector = vector;
> >  	int_pkt->int_desc.reserved = 0;
> >  	int_pkt->int_desc.vector_count = 1;
> > -	int_pkt->int_desc.delivery_mode = APIC_DELIVERY_MODE_FIXED;
> > +	int_pkt->int_desc.delivery_mode = delivery_mode;
> >  	cpu = hv_compose_msi_req_get_cpu(affinity);
> >  	int_pkt->int_desc.processor_array[0] =
> >  		hv_cpu_number_to_vp_number(cpu);
> > @@ -1419,7 +1421,6 @@ static u32 hv_compose_msi_req_v3(
> >   */
> >  static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> >  {
> > -	struct irq_cfg *cfg = irqd_cfg(data);
> >  	struct hv_pcibus_device *hbus;
> >  	struct vmbus_channel *channel;
> >  	struct hv_pci_dev *hpdev;
> > @@ -1470,7 +1471,7 @@ static void hv_compose_msi_msg(struct irq_data
> *data, struct msi_msg *msg)
> >  		size = hv_compose_msi_req_v1(&ctxt.int_pkts.v1,
> >  					dest,
> >  					hpdev->desc.win_slot.slot,
> > -					cfg->vector);
> > +					hv_msi_get_int_vector(data));
> >  		break;
> >
> >  	case PCI_PROTOCOL_VERSION_1_2:
> > @@ -1478,14 +1479,14 @@ static void hv_compose_msi_msg(struct irq_data
> *data, struct msi_msg *msg)
> >  		size = hv_compose_msi_req_v2(&ctxt.int_pkts.v2,
> >  					dest,
> >  					hpdev->desc.win_slot.slot,
> > -					cfg->vector);
> > +					hv_msi_get_int_vector(data));
> >  		break;
> >
> >  	case PCI_PROTOCOL_VERSION_1_4:
> >  		size = hv_compose_msi_req_v3(&ctxt.int_pkts.v3,
> >  					dest,
> >  					hpdev->desc.win_slot.slot,
> > -					cfg->vector);
> > +					hv_msi_get_int_vector(data));
> >  		break;
> >
> >  	default:
> > @@ -1601,7 +1602,7 @@ static struct irq_chip hv_msi_irq_chip = {
> >  };
> >
> >  static struct msi_domain_ops hv_msi_ops = {
> > -	.msi_prepare	= pci_msi_prepare,
> > +	.msi_prepare	= hv_msi_prepare,
> >  	.msi_free	= hv_msi_free,
> >  };
> >
> > @@ -1625,12 +1626,13 @@ static int hv_pcie_init_irq_domain(struct
> hv_pcibus_device *hbus)
> >  	hbus->msi_info.flags = (MSI_FLAG_USE_DEF_DOM_OPS |
> >  		MSI_FLAG_USE_DEF_CHIP_OPS | MSI_FLAG_MULTI_PCI_MSI |
> >  		MSI_FLAG_PCI_MSIX);
> > -	hbus->msi_info.handler = handle_edge_irq;
> > -	hbus->msi_info.handler_name = "edge";
> > +	hbus->msi_info.handler =
> > +		fasteoi ? handle_fasteoi_irq : handle_edge_irq;
> > +	hbus->msi_info.handler_name = fasteoi ? "fasteoi" : "edge";
> 
> The fact that you somehow need to know what the GIC is using as a flow
> handler is a sure sign that you are doing something wrong. In a
> hierarchical setup, only the root of the hierarchy should ever know
> about that. Having anything there is actively wrong.

Thanks, comments below.

> >  	hbus->msi_info.data = hbus;
> >  	hbus->irq_domain = pci_msi_create_irq_domain(hbus->fwnode,
> >  						     &hbus->msi_info,
> > -						     x86_vector_domain);
> > +						     parent_domain);
> >  	if (!hbus->irq_domain) {
> >  		dev_err(&hbus->hdev->device,
> >  			"Failed to build an MSI IRQ domain\n");
> > @@ -3531,13 +3533,21 @@ static void __exit exit_hv_pci_drv(void)
> >  	hvpci_block_ops.read_block = NULL;
> >  	hvpci_block_ops.write_block = NULL;
> >  	hvpci_block_ops.reg_blk_invalidate = NULL;
> > +
> > +	hv_pci_irqchip_free();
> >  }
> >
> >  static int __init init_hv_pci_drv(void)
> >  {
> > +	int ret;
> > +
> >  	if (!hv_is_hyperv_initialized())
> >  		return -ENODEV;
> >
> > +	ret = hv_pci_irqchip_init(&parent_domain, &fasteoi, &delivery_mode);
> > +	if (ret)
> > +		return ret;
> 
> Having established that the fasteoi thing is nothing but a bug, that
> the delivery_mode is a constant, and that all that matters is actually
> the parent domain which is a global pointer on x86, and something that
> gets allocated on arm64, you can greatly simplify the whole thing:
> 
> #ifdef CONFIG_X86
> #define DELIVERY_MODE	APIC_DELIVERY_MODE_FIXED
> #define FLOW_HANDLER	handle_edge_irq
> #define FLOW_NAME	"edge"
> 
> static struct irq_domain *hv_pci_get_root_domain(void)
> {
> 	return x86_vector_domain;
> }
> #endif
> 
> #ifdef CONFIG_ARM64
> #define DELIVERY_MODE	0
> #define FLOW_HANDLER	NULL
> #define FLOW_NAME	NULL
> #define pci_msi_prepare	NULL
> 
> static struct irq_domain *hv_pci_get_root_domain(void)
> {
> 	[...]
> }
> #endif

Thanks. I have followed the above suggestion in v4.

> as once you look at it seriously, the whole "separate file for the IRQ
> code" is totally unnecessary (as Michael pointed out earlier), because
> the abstractions you are adding are for most of them unnecessary.

V4 will get rid of the separate file for the IRQ chip and that's getting
moved back to pci-hyperv.c and that should address this comment.
Thanks.

- Sunil




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux