Re: [PATCH 7/9] drm/simpledrm: Enable FB_DAMAGE_CLIPS property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

Am 24.10.21 um 17:20 schrieb Noralf Trønnes:


Den 22.10.2021 15.28, skrev Thomas Zimmermann:
Enable the FB_DAMAGE_CLIPS property to reduce display-update
overhead. Also fixes a warning in the kernel log.

   simple-framebuffer simple-framebuffer.0: [drm] drm_plane_enable_fb_damage_clips() not called

Fix the computation of the blit rectangle. This wasn't an issue so
far, as simpledrm always blitted the full framebuffer. The code now
supports damage clipping and virtual screen sizes.

Signed-off-by: Thomas Zimmermann <tzimmermann@xxxxxxx>
---
  drivers/gpu/drm/tiny/simpledrm.c | 30 ++++++++++++++++++++++--------
  1 file changed, 22 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 571f716ff427..e872121e9fb0 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -642,7 +642,7 @@ simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
  	void *vmap = shadow_plane_state->data[0].vaddr; /* TODO: Use mapping abstraction */
  	struct drm_device *dev = &sdev->dev;
  	void __iomem *dst = sdev->screen_base;
-	struct drm_rect clip;
+	struct drm_rect src_clip, dst_clip;
  	int idx;
if (!fb)
@@ -651,10 +651,14 @@ simpledrm_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
  	if (!drm_dev_enter(dev, &idx))
  		return;
- drm_rect_init(&clip, 0, 0, fb->width, fb->height);
+	drm_rect_fp_to_int(&src_clip, &plane_state->src);
- dst += drm_fb_clip_offset(sdev->pitch, sdev->format, &clip);
-	drm_fb_blit_toio(dst, sdev->pitch, sdev->format->format, vmap, fb, &clip);
+	dst_clip = plane_state->dst;
+	if (!drm_rect_intersect(&dst_clip, &src_clip))
+		return;
+
+	dst += drm_fb_clip_offset(sdev->pitch, sdev->format, &dst_clip);
+	drm_fb_blit_toio(dst, sdev->pitch, sdev->format->format, vmap, fb, &src_clip);
drm_dev_exit(idx);
  }
@@ -686,20 +690,28 @@ simpledrm_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
  	struct drm_framebuffer *fb = plane_state->fb;
  	struct drm_device *dev = &sdev->dev;
  	void __iomem *dst = sdev->screen_base;
-	struct drm_rect clip;
+	struct drm_rect damage_clip, src_clip, dst_clip;
  	int idx;
if (!fb)
  		return;
- if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &clip))
+	if (!drm_atomic_helper_damage_merged(old_plane_state, plane_state, &damage_clip))
+		return;
+

I'm afraid I don't understand what's going on here, but isn't it
possible to put this logic into drm_atomic_helper_damage_merged()?

The code above gets the damage rectangle (i.e., the plane's area that needs to be updated). The code below get's the framebuffer area. If they don't overlap, return. (I think this can really only fail with the next patch in the series, which adds virtual screens.)


Noralf.

+	drm_rect_fp_to_int(&src_clip, &plane_state->src);
+	if (!drm_rect_intersect(&src_clip, &damage_clip))
+		return;
+
+	dst_clip = plane_state->dst;
+	if (!drm_rect_intersect(&dst_clip, &src_clip))
  		return;

And here we check if the updated plane/framebuffer area is actually visible on screen; otherwise return. It could be in an area that is off-screen. (Again, this probably only fails with the virtual-screen patch.)

I don't think this is all generic enough to be within drm_atomic_helper_damage_merged(). But once we have multiple SHMEM-based drivers with virtual screens, we can move it into a helper for shadow-buffered planes. Your gud driver would be a candidate for this feature as well.

Best regards
Thomas

if (!drm_dev_enter(dev, &idx))
  		return;
- dst += drm_fb_clip_offset(sdev->pitch, sdev->format, &clip);
-	drm_fb_blit_toio(dst, sdev->pitch, sdev->format->format, vmap, fb, &clip);
+	dst += drm_fb_clip_offset(sdev->pitch, sdev->format, &dst_clip);
+	drm_fb_blit_toio(dst, sdev->pitch, sdev->format->format, vmap, fb, &src_clip);
drm_dev_exit(idx);
  }
@@ -794,6 +806,8 @@ static int simpledrm_device_init_modeset(struct simpledrm_device *sdev)
  	if (ret)
  		return ret;
+ drm_plane_enable_fb_damage_clips(&pipe->plane);
+
  	drm_mode_config_reset(dev);
return 0;


--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev

Attachment: OpenPGP_signature
Description: OpenPGP digital signature


[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux