> > + if (!(ms_hyperv.priv_high & HV_ENABLE_EXTENDED_HYPERCALLS))
> > + return 0;
>
> Return 'false' since the function is declared as bool?
Will fix this in the next iteration.
> > + if (hv_do_hypercall(HV_EXT_CALL_QUERY_CAPABILITIES, NULL, cap) ==
> > + HV_STATUS_SUCCESS)
>
> Need to mask before checking for HV_STATUS_SUCCESS. With regard to the
> reserved fields in the returned 64 bit status, the TLFS says "Callers should ignore the
> value in these bits". There's no promise that they are zero.
Coming in next version.
>
> > + ext_cap = *cap;
> > +
> > + local_irq_restore(flags);
> > + return ext_cap & cap_query;
> > +}
>
> As I noted in a review comment back in May, the output arg here is
> only 64 bits in size and could just live on the stack with assurance that
> it won't cross a page boundary. So the code could be:
>
> bool hv_query_ext_cap(u64 cap_query)
> {
> u64 cap;
> u64 status;
>
> if(!(ms_hyperv.priv_high & HV_ENABLE_EXTENDED_HYPERCALLS))
> return false;
>
> status = hv_do_hypercall(HV_EXT_CALL_QUERY_CAPABILITIES, NULL, &cap);
> if ((status & HV_HYPERCALL_RESULT_MASK) != HV_STATUS_SUCCESS)
> cap = 0;
>
> return extcap & cap;
> }
>
> But if you think there's value in using the designated page for hypercall args,
> I'm OK with just fixing the testing of the status.
Hypercall input/output addresses should be 'virt_to_phys' compatible as 'hv_do_hypercall'
will call that on the address to get the physical address, to pass on to the hypervisor. Stack
variables can be virtually allocated and are not compatible with 'virt_to_phys', but we should
be able to use 'static' variable for this. Will address this in next version.
>
> > - pr_info("Hyper-V: features 0x%x, hints 0x%x, misc 0x%x\n",
> > - ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
> > + pr_info("Hyper-V: privilege flags low:0x%x, high:0x%x, hints:0x%x, misc:0x%x\n",
>
> Nit. Could we just use a space instead of a colon before each of the printed hex values?
Sure, coming in next version.
> > @@ -23,6 +23,7 @@ config HYPERV_UTILS
> > config HYPERV_BALLOON
> > tristate "Microsoft Hyper-V Balloon driver"
> > depends on HYPERV
> > + select PAGE_REPORTING
>
> With this selection made, are the #ifdef CONFIG_PAGE_REPORTING occurrences
> below really needed? I looked at the virtio balloon driver, which is also does
> "select PAGE_REPORTING", and it does not have any #ifdef's.
Good point. Don't think we need extra 'ifdefs' for page reporting now that it is
implicit with Hyper-V Balloon. Coming in next version.
> > static struct hv_dynmem_device dm_device;
> > @@ -1568,6 +1573,84 @@ static void balloon_onchannelcallback(void *context)
> >
> > }
> >
> > +#ifdef CONFIG_PAGE_REPORTING
> > +/* Hyper-V only supports reporting 2MB pages or higher */
>
> I'm guessing the above is the same on ARM64 where the guest is using 16K
> or 64K page size, because Hyper-V always uses 4K pages and expects all guest
> communication to be in units of 4K pages.
Yes.
> > + range->page.additional_pages =
> > + (sg->length / HV_MIN_PAGE_REPORTING_LEN) - 1;
>
> Perhaps verify that sg->length is at least 2 Meg? (similar to verifying that nents
> isn't too big). If it isn't at least 2 Meg, then additional_pages will get set to -1,
> and I suspect weird things will happen.
I will add an assert.
>
> I was also thinking about whether sg->length could be big enough to overflow
> the additional_pages field. sg->length is an unsigned int, so I don't think so.
Yes, the additional_pages is designed to accommodate 32-bits.
>
> > + range->base_large_pfn =
> > + page_to_pfn(sg_page(sg)) >> HV_MIN_PAGE_REPORTING_ORDER;
>
> page_to_pfn() will do the wrong thing on ARM64 with 16K or 64K pages.
> Use page_to_hvpfn() instead.
Good point.
> > +static void enable_page_reporting(void)
> > +{
> > + int ret;
> > +
> > + BUILD_BUG_ON(pageblock_order < HV_MIN_PAGE_REPORTING_ORDER);
>
> The BUILD_BUG_ON won't work in the case where pageblock_order is
> actually a variable rather than a constant, though that's currently only ia64 and
> powerpc, which we don't directly care about. Nonetheless, this would break if
> pageblock_order were to become a variable.
>
I have moved this to a conditional statement. The compiler can optimize the code
away when it is a constant.
> > + if (ret < 0) {
> > + dm_device.pr_dev_info.report = NULL;
> > + pr_err("Failed to enable cold memory discard: %d\n", ret);
> > + } else {
> > + pr_info("Cold memory discard hint enabled\n");
> > + }
>
> Should the above two messages be prefixed with "Hyper-V: "?
Not needed, as you also replied later.
> Nit: Typically the error path undoes things in the reverse order. So
> the disable_page_reporting() would occur before the call to
> vmbus_close().
Sure.
>
> > return ret;
> > }
> > @@ -1753,6 +1843,9 @@ static int balloon_remove(struct hv_device *dev)
> > #ifdef CONFIG_MEMORY_HOTPLUG
> > unregister_memory_notifier(&hv_memory_nb);
> > restore_online_page_callback(&hv_online_page);
> > +#endif
> > +#ifdef CONFIG_PAGE_REPORTING
> > + disable_page_reporting();
> > #endif
>
> Same here regarding the ordering.
Noted.
> > + * The whole argument should fit in a page to be able to pass to the hypervisor
> > + * in one hypercall.
> > + */
> > +#define HV_MEMORY_HINT_MAX_GPA_PAGE_RANGES \
> > + ((PAGE_SIZE - sizeof(struct hv_memory_hint)) / \
>
> Use HV_HYP_PAGE_SIZE instead of PAGE_SIZE.
Done.
Thanks for the review.
