[PATCH 13/13] uas: set virt_boundary_mask in the scsi host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This ensures all proper DMA layer handling is taken care of by the
SCSI midlayer.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
 drivers/usb/storage/uas.c | 36 ++++++++++++++++--------------------
 1 file changed, 16 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 047c5922618f..d20919e7bbf4 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -789,29 +789,9 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo =
 		(struct uas_dev_info *)sdev->host->hostdata;
-	int maxp;
 
 	sdev->hostdata = devinfo;
 
-	/*
-	 * We have two requirements here. We must satisfy the requirements
-	 * of the physical HC and the demands of the protocol, as we
-	 * definitely want no additional memory allocation in this path
-	 * ruling out using bounce buffers.
-	 *
-	 * For a transmission on USB to continue we must never send
-	 * a package that is smaller than maxpacket. Hence the length of each
-         * scatterlist element except the last must be divisible by the
-         * Bulk maxpacket value.
-	 * If the HC does not ensure that through SG,
-	 * the upper layer must do that. We must assume nothing
-	 * about the capabilities off the HC, so we use the most
-	 * pessimistic requirement.
-	 */
-
-	maxp = usb_maxpacket(devinfo->udev, devinfo->data_in_pipe, 0);
-	blk_queue_virt_boundary(sdev->request_queue, maxp - 1);
-
 	/*
 	 * The protocol has no requirements on alignment in the strict sense.
 	 * Controllers may or may not have alignment restrictions.
@@ -1004,6 +984,22 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	 */
 	shost->can_queue = devinfo->qdepth - 2;
 
+	/*
+	 * We have two requirements here. We must satisfy the requirements of
+	 * the physical HC and the demands of the protocol, as we definitely
+	 * want no additional memory allocation in this path ruling out using
+	 * bounce buffers.
+	 *
+	 * For a transmission on USB to continue we must never send a package
+	 * that is smaller than maxpacket.  Hence the length of each scatterlist
+	 * element except the last must be divisible by the Bulk maxpacket
+	 * value.  If the HC does not ensure that through SG, the upper layer
+	 * must do that.  We must assume nothing about the capabilities off the
+	 * HC, so we use the most pessimistic requirement.
+	 */
+	shost->virt_boundary_mask =
+		usb_maxpacket(udev, devinfo->data_in_pipe, 0) - 1;
+
 	usb_set_intfdata(intf, shost);
 	result = scsi_add_host(shost, &intf->dev);
 	if (result)
-- 
2.20.1




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux