From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> Add property to describe the PWM-Out pin polarity. Link: https://www.ti.com/lit/gpn/amc6821 Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> --- v2: no changes v1: https://lore.kernel.org/all/20250218165633.106867-2-francesco@xxxxxxxxxx/ --- Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml b/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml index 5d33f1a23d03..11604aa41b3e 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml @@ -28,6 +28,14 @@ properties: i2c-mux: type: object + ti,pwm-inverted: + type: boolean + description: + Set to make the PWM-Out pin go high (with an external pull-up resistor) + for 100% duty cycle (suitable for driving the fan using a NMOS device), + when not set the PWM-Out pin goes low for 100% duty cycle (suitable for + driving the fan using a PMOS device). + required: - compatible - reg -- 2.39.5
