On 23/01/2025 at 18:11, Ming Yu wrote:
> This driver supports Hardware monitor functionality for NCT6694 MFD
> device based on USB interface.
>
> Signed-off-by: Ming Yu <a0282524688@xxxxxxxxx>
> ---
(...)
> +static int nct6694_temp_write(struct device *dev, u32 attr, int channel,
> + long val)
> +{
> + struct nct6694_hwmon_data *data = dev_get_drvdata(dev);
> + struct nct6694_cmd_header cmd_hd;
> + unsigned char temp_hyst;
> + signed char temp_max;
> + int ret;
> +
> + guard(mutex)(&data->lock);
> +
> + switch (attr) {
> + case hwmon_temp_enable:
> + if (val == 0)
> + data->hwmon_en.tin_en[channel / 8] &= ~BIT(channel % 8);
> + else if (val == 1)
> + data->hwmon_en.tin_en[channel / 8] |= BIT(channel % 8);
> + else
> + return -EINVAL;
> +
> + cmd_hd = (struct nct6694_cmd_header) {
> + .mod = NCT6694_HWMON_MOD,
> + .cmd = NCT6694_HWMON_CONTROL,
> + .sel = NCT6694_HWMON_CONTROL_SEL,
> + .len = cpu_to_le16(sizeof(data->hwmon_en))
> + };
> +
> + return nct6694_write_msg(data->nct6694, &cmd_hd,
> + &data->hwmon_en);
> + case hwmon_temp_max:
> + cmd_hd = (struct nct6694_cmd_header) {
> + .mod = NCT6694_HWMON_MOD,
> + .cmd = NCT6694_HWMON_ALARM,
> + .sel = NCT6694_HWMON_ALARM_SEL,
> + .len = cpu_to_le16(sizeof(data->msg->hwmon_alarm))
> + };
> + ret = nct6694_read_msg(data->nct6694, &cmd_hd,
> + &data->msg->hwmon_alarm);
> + if (ret)
> + return ret;
> +
> + val = clamp_val(val, -127000, 127000);
> + data->msg->hwmon_alarm.tin_cfg[channel].hl = temp_to_reg(val);
> +
> + return nct6694_write_msg(data->nct6694, &cmd_hd,
> + &data->msg->hwmon_alarm);
> + case hwmon_temp_max_hyst:
> + cmd_hd = (struct nct6694_cmd_header) {
> + .mod = NCT6694_HWMON_MOD,
> + .cmd = NCT6694_HWMON_ALARM,
> + .sel = NCT6694_HWMON_ALARM_SEL,
> + .len = cpu_to_le16(sizeof(data->msg->hwmon_alarm))
> + };
> + ret = nct6694_read_msg(data->nct6694, &cmd_hd,
> + &data->msg->hwmon_alarm);
> +
> + val = clamp_val(val, -127000, 127000);
> + temp_max = data->msg->hwmon_alarm.tin_cfg[channel].hl;
> + temp_hyst = temp_max - temp_to_reg(val);
> + temp_hyst = clamp_val(temp_hyst, 0, 7);
temp_hyst is unsigned. It can not be smaller than zero. No need for
clamp(), using min here is sufficient.
> + data->msg->hwmon_alarm.tin_cfg[channel].hyst =
> + (data->msg->hwmon_alarm.tin_cfg[channel].hyst & ~NCT6694_TIN_HYST_MASK) |
> + FIELD_PREP(NCT6694_TIN_HYST_MASK, temp_hyst);
> +
> + return nct6694_write_msg(data->nct6694, &cmd_hd,
> + &data->msg->hwmon_alarm);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
(...)
Yours sincerely,
Vincent Mailhol
