Tested with the following script:
---
{
# Access hwmon
cd /sys/class/hwmon/hwmon1/
# Check alarms
alarms() {
echo -n ' [READ]'
echo -n " fan[1234]_alarm = $(cat ./fan[1234]_alarm | tr '\n' ' ')"
echo -n " temp{[123456789],10}_alarm = $(cat ./temp{[123456789],10}_alarm | tr '\n' ' ')"
echo ''
}
# Configure hardware
echo '0' >./alarm_mask
echo '10' >./num_temp_sensors
# Test fans
for fan in $(seq 1 4); do
echo " [TEST] fan${fan}_min : Min FAN speed ${fan} under limit"
echo '65535' >"./fan${fan}_min"
sleep 4
alarms
echo '0' >"./fan${fan}_min"
sleep 5
done
# Test temperatures
for temp in $(seq 1 10); do
echo " [TEST] temp${temp}_max : Max temperature ${temp} over limit"
echo '-126000' >"./temp${temp}_max"
sleep 5
alarms
echo '127000' >"./temp${temp}_max"
sleep 5
done
# Test clean
echo ' [TEST] Final state'
alarms
}
---
Faulty values:
[TEST] temp1_max : Max temperature 1 over limit
[READ] fan[1234]_alarm = 0 0 0 0 temp{[123456789],10}_alarm = 0 1 0 1 0 1 0 1 0 1
[TEST] temp2_max : Max temperature 2 over limit
[READ] fan[1234]_alarm = 0 0 0 0 temp{[123456789],10}_alarm = 0 0 0 0 0 0 0 0 0 0
---
Fixed values:
[TEST] fan1_min : Min FAN speed 1 under limit
[READ] fan[1234]_alarm = 1 0 0 0 temp{[123456789],10}_alarm = 0 0 0 0 0 0 0 0 0 0
[TEST] fan2_min : Min FAN speed 2 under limit
[READ] fan[1234]_alarm = 0 1 0 0 temp{[123456789],10}_alarm = 0 0 0 0 0 0 0 0 0 0
[TEST] fan3_min : Min FAN speed 3 under limit
[READ] fan[1234]_alarm = 0 0 1 0 temp{[123456789],10}_alarm = 0 0 0 0 0 0 0 0 0 0
[TEST] fan4_min : Min FAN speed 4 under limit
[READ] fan[1234]_alarm = 0 0 0 1 temp{[123456789],10}_alarm = 0 0 0 0 0 0 0 0 0 0
[TEST] temp1_max : Max temperature 1 over limit
[READ] fan[1234]_alarm = 0 0 0 0 temp{[123456789],10}_alarm = 1 0 0 0 0 0 0 0 0 0
[TEST] temp2_max : Max temperature 2 over limit
[READ] fan[1234]_alarm = 0 0 0 0 temp{[123456789],10}_alarm = 0 1 0 0 0 0 0 0 0 0
[TEST] temp3_max : Max temperature 3 over limit
[READ] fan[1234]_alarm = 0 0 0 0 temp{[123456789],10}_alarm = 0 0 1 0 0 0 0 0 0 0
...
---
Signed-off-by: Adrian DC <radian.dc@xxxxxxxxx>
---
drivers/hwmon/adt7470.c | 52 +++++++++++++++++++++++++++++++++++++++--
1 file changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 712bc41b4a0d..afb881385dbb 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -551,7 +551,40 @@ static int adt7470_temp_read(struct device *dev, u32 attr, int channel, long *va
*val = 1000 * data->temp_max[channel];
break;
case hwmon_temp_alarm:
- *val = !!(data->alarm & channel);
+ switch (channel) {
+ case 0:
+ *val = !!(data->alarm & ADT7470_R1T_ALARM);
+ break;
+ case 1:
+ *val = !!(data->alarm & ADT7470_R2T_ALARM);
+ break;
+ case 2:
+ *val = !!(data->alarm & ADT7470_R3T_ALARM);
+ break;
+ case 3:
+ *val = !!(data->alarm & ADT7470_R4T_ALARM);
+ break;
+ case 4:
+ *val = !!(data->alarm & ADT7470_R5T_ALARM);
+ break;
+ case 5:
+ *val = !!(data->alarm & ADT7470_R6T_ALARM);
+ break;
+ case 6:
+ *val = !!(data->alarm & ADT7470_R7T_ALARM);
+ break;
+ case 7:
+ *val = !!(data->alarm & (ADT7470_R8T_ALARM << 8));
+ break;
+ case 8:
+ *val = !!(data->alarm & (ADT7470_R9T_ALARM << 8));
+ break;
+ case 9:
+ *val = !!(data->alarm & (ADT7470_R10T_ALARM << 8));
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
break;
default:
return -EOPNOTSUPP;
@@ -648,7 +681,22 @@ static int adt7470_fan_read(struct device *dev, u32 attr, int channel, long *val
*val = 0;
break;
case hwmon_fan_alarm:
- *val = !!(data->alarm & (1 << (12 + channel)));
+ switch (channel) {
+ case 0:
+ *val = !!(data->alarm & (ADT7470_FAN1_ALARM << 8));
+ break;
+ case 1:
+ *val = !!(data->alarm & (ADT7470_FAN2_ALARM << 8));
+ break;
+ case 2:
+ *val = !!(data->alarm & (ADT7470_FAN3_ALARM << 8));
+ break;
+ case 3:
+ *val = !!(data->alarm & (ADT7470_FAN4_ALARM << 8));
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
break;
default:
return -EOPNOTSUPP;
--
2.43.0
