Add the driver to monitor Intel common redundant power supply (crps185)
with hwmon over pmbus.
Signed-off-by: Ninad Palsule <ninad@xxxxxxxxxxxxx>
---
Documentation/hwmon/crps.rst | 97 +++++++++++++++++++++++++++++++++++
Documentation/hwmon/index.rst | 1 +
MAINTAINERS | 7 +++
drivers/hwmon/pmbus/Kconfig | 9 ++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/crps.c | 79 ++++++++++++++++++++++++++++
6 files changed, 194 insertions(+)
create mode 100644 Documentation/hwmon/crps.rst
create mode 100644 drivers/hwmon/pmbus/crps.c
diff --git a/Documentation/hwmon/crps.rst b/Documentation/hwmon/crps.rst
new file mode 100644
index 000000000000..74570ed1e978
--- /dev/null
+++ b/Documentation/hwmon/crps.rst
@@ -0,0 +1,97 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver crps
+==================
+
+Supported chips:
+
+ * Intel CRPS185
+
+ Prefix: 'crps185'
+
+ Addresses scanned: -
+
+ Datasheet: Publicly not available.
+
+Authors:
+ Ninad Palsule <ninad@xxxxxxxxxxxxx>
+
+
+Description
+-----------
+
+This driver implements support for Intel Common Redundant Power supply with
+PMBus support.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Sysfs entries
+-------------
+
+======================= ======================================================
+curr1_label "iin"
+curr1_input Measured input current
+curr1_max Maximum input current
+curr1_max_alarm Input maximum current high alarm
+curr1_crit Critial high input current
+curr1_crit_alarm Input critical current high alarm
+curr1_rated_max Maximum rated input current
+
+curr2_label "iout1"
+curr2_input Measured output current
+curr2_max Maximum output current
+curr2_max_alarm Output maximum current high alarm
+curr2_crit Critial high output current
+curr2_crit_alarm Output critical current high alarm
+curr2_rated_max Maximum rated output current
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_crit Critical input over voltage
+in1_crit_alarm Critical input over voltage alarm
+in1_max Maximum input over voltage
+in1_max_alarm Maximum input over voltage alarm
+in1_rated_min Minimum rated input voltage
+in1_rated_max Maximum rated input voltage
+
+in2_label "vout1"
+in2_input Measured input voltage
+in2_crit Critical input over voltage
+in2_crit_alarm Critical input over voltage alarm
+in2_lcrit Critical input under voltage fault
+in2_lcrit_alarm Critical input under voltage fault alarm
+in2_max Maximum input over voltage
+in2_max_alarm Maximum input over voltage alarm
+in2_min Minimum input under voltage warning
+in2_min_alarm Minimum input under voltage warning alarm
+in2_rated_min Minimum rated input voltage
+in2_rated_max Maximum rated input voltage
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power high alarm
+power1_max Maximum input power
+power1_rated_max Maximum rated input power
+
+temp[1-2]_input Measured temperature
+temp[1-2]_crit Critical temperature
+temp[1-2]_crit_alarm Critical temperature alarm
+temp[1-2]_max Maximum temperature
+temp[1-2]_max_alarm Maximum temperature alarm
+temp[1-2]_rated_max Maximum rated temperature
+
+fan1_alarm Fan 1 warning.
+fan1_fault Fan 1 fault.
+fan1_input Fan 1 speed in RPM.
+fan1_target Fan 1 target.
+======================= ======================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 1a3cb0a59f72..b1ea445479b0 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -58,6 +58,7 @@ Hardware Monitoring Kernel Drivers
corsair-cpro
corsair-psu
cros_ec_hwmon
+ crps
da9052
da9055
dell-smm-hwmon
diff --git a/MAINTAINERS b/MAINTAINERS
index 637ddd44245f..e99f26f75733 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6100,6 +6100,13 @@ L: linux-input@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/hid/hid-creative-sb0540.c
+INTEL CRPS COMMON REDUNDANT PSU DRIVER
+M: Ninad Palsule <ninad@xxxxxxxxxxxxx>
+L: linux-hwmon@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/hwmon/crps.rst
+F: drivers/hwmon/pmbus/crps.c
+
CRYPTO API
M: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
M: "David S. Miller" <davem@xxxxxxxxxxxxx>
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 22418a05ced0..43b6df04e0f9 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -85,6 +85,15 @@ config SENSORS_BPA_RS600
This driver can also be built as a module. If so, the module will
be called bpa-rs600.
+config SENSORS_CRPS
+ tristate "Intel Common Redundant Power Supply"
+ help
+ If you say yes here you get hardware monitoring support for the Intel
+ Common Redundant Power Supply.
+
+ This driver can also be built as a module. If so, the module will
+ be called crps.
+
config SENSORS_DELTA_AHE50DC_FAN
tristate "Delta AHE-50DC fan control module"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 3d3183f8d2a7..c7eb7739b7f8 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -62,3 +62,4 @@ obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
obj-$(CONFIG_SENSORS_XDPE152) += xdpe152c4.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
obj-$(CONFIG_SENSORS_PIM4328) += pim4328.o
+obj-$(CONFIG_SENSORS_CRPS) += crps.o
diff --git a/drivers/hwmon/pmbus/crps.c b/drivers/hwmon/pmbus/crps.c
new file mode 100644
index 000000000000..09425c404fc8
--- /dev/null
+++ b/drivers/hwmon/pmbus/crps.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2024 IBM Corp.
+ */
+
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+static const struct i2c_device_id crps_id[] = {
+ { "intel_crps185" },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, crps_id);
+
+static struct pmbus_driver_info crps_info = {
+ .pages = 1,
+ /* PSU uses default linear data format. */
+ .func[0] = PMBUS_HAVE_PIN | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_IIN |
+ PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+ PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
+};
+
+static int crps_probe(struct i2c_client *client)
+{
+ int rc;
+ struct device *dev = &client->dev;
+ char buf[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
+
+ rc = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+ if (rc < 0) {
+ dev_err_probe(dev, rc, "Failed to read PMBUS_MFR_MODEL\n");
+ return rc;
+ }
+
+ if (strncmp(buf, "03NK260", 7) == 7) {
+ buf[rc] = '\0';
+ dev_err_probe(dev, -ENODEV, "Model '%s' not supported\n", buf);
+ return -ENODEV;
+ }
+
+ rc = pmbus_do_probe(client, &crps_info);
+ if (rc) {
+ dev_err_probe(dev, rc, "Failed to probe %d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id crps_of_match[] = {
+ {
+ .compatible = "intel,crps185",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, crps_of_match);
+
+static struct i2c_driver crps_driver = {
+ .driver = {
+ .name = "crps",
+ .of_match_table = crps_of_match,
+ },
+ .probe = crps_probe,
+ .id_table = crps_id,
+};
+
+module_i2c_driver(crps_driver);
+
+MODULE_AUTHOR("Ninad Palsule");
+MODULE_DESCRIPTION("PMBus driver for Intel Common Redundant power supplies");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("PMBUS");
--
2.43.0
