On 11/15/24 16:57, Guenter Roeck wrote: > On Fri, Nov 15, 2024 at 04:39:08PM +0100, Thomas Richard wrote: >> Add support for the Congatec Board Controller. This controller exposes >> temperature, voltage, current and fan sensors. >> >> The available sensors list cannot be predicted. Some sensors can be >> present or not, depending the system. >> The driver has an internal list of all possible sensors, for all Congatec >> boards. The Board Controller gives to the driver its sensors list, and >> their status (active or not). >> >> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx> >> --- >> MAINTAINERS | 1 + >> drivers/hwmon/Kconfig | 9 ++ >> drivers/hwmon/Makefile | 1 + >> drivers/hwmon/cgbc-hwmon.c | 304 +++++++++++++++++++++++++++++++++++++++++++++ > > Two problems: > - Documentation/hwmon/cgbc-hwmon.rst is missing. > - "git am" fails due to a conflict in MAINTAINERS, meaning it is not based > on the mainline kernel. It is based on linux-next, as the MFD driver was not yet merged mainline. Now v6.13-rc1 is available. So I will rebase the serie. Regards, Thomas
