On 11/11/24 10:10, Guenter Roeck wrote:
On 11/11/24 10:04, Guenter Roeck wrote:
[ ... ]
+static int p3t1085_i3c_probe(struct i3c_device *i3cdev)
+{
+ struct device *dev = i3cdev_to_dev(i3cdev);
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i3c(i3cdev, &tmp108_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to register i3c regmap\n");
+
+ return tmp108_common_probe(dev, regmap, "p3t1085_i3c");
+}
+
+static struct i3c_driver p3t1085_driver = {
+ .driver = {
+ .name = "p3t1085_i3c",
+ },
+ .probe = p3t1085_i3c_probe,
+ .id_table = p3t1085_i3c_ids,
+};
+module_i3c_driver(p3t1085_driver);
+#endif
While looking at i3c code, I found module_i3c_i2c_driver(). Can we use
that function to register both i2c and i3c in one call ?
Answering my own question: No, because devm_regmap_init_i3c()
does not provide a dummy function if i3C is not enabled.
I do have another concern, though: What happens if the i2c part of the driver
registers and the i3c part fails to register ? module_i3c_i2c_driver() handles
that situation by unregistering the i2c driver, but I don't really know
what happens if a single module registers two drivers and one of them fails.
Thanks,
Guenter
