The Congatec Board Controller has some voltage, current, temperature
and fan sensors.
This series adds an hwmon driver to enable the support.
This series is based on linux-next (commit
1ffec08567f426a1c593e038cadc61bdc38cb467) as the MFD driver is not yet
available in the main tree.
The sensors support has been tested on the conga-SA7 board with a
conga-SEVAL board.
Note that the Board Controller returns two unknown sensors, which causes
two warnings. These unknown sensors are not defined in the driver provided
by Congatec.
cgbc-hwmon cgbc-hwmon: Board Controller returned an unknown sensor (type=2, id=17), ignore it
cgbc-hwmon cgbc-hwmon: Board Controller returned an unknown sensor (type=1, id=10), ignore it
Best Regards,
Thomas
$ sensors
cgbc_hwmon-isa-0000
Adapter: ISA adapter
DC Runtime Voltage: 4.93 V
Chipset Temperature: +48.0 C
Board Temperature: +44.0 C
Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
---
Thomas Richard (2):
hwmon: Add Congatec Board Controller monitoring driver
mfd: cgbc: add a hwmon cell
MAINTAINERS | 1 +
drivers/hwmon/Kconfig | 9 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/cgbc-hwmon.c | 287 +++++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/cgbc-core.c | 1 +
5 files changed, 299 insertions(+)
---
base-commit: 1ffec08567f426a1c593e038cadc61bdc38cb467
change-id: 20240809-congatec-board-controller-hwmon-e9e63d957d33
Best regards,
--
Thomas Richard <thomas.richard@xxxxxxxxxxx>
