On Thu, Oct 24, 2024 at 2:33 PM Ming Yu <a0282524688@xxxxxxxxx> wrote:
>
> This driver supports Hardware monitor functionality for NCT6694 MFD
> device based on USB interface.
>
> Signed-off-by: Ming Yu <tmyu0@xxxxxxxxxxx>
> ---
> MAINTAINERS | 1 +
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/nct6694-hwmon.c | 407 ++++++++++++++++++++++++++++++++++
> 4 files changed, 419 insertions(+)
> create mode 100644 drivers/hwmon/nct6694-hwmon.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 63387c0d4ab6..2aa87ad84156 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16439,6 +16439,7 @@ M: Ming Yu <tmyu0@xxxxxxxxxxx>
> L: linux-kernel@xxxxxxxxxxxxxxx
> S: Supported
> F: drivers/gpio/gpio-nct6694.c
> +F: drivers/hwmon/nct6694-hwmon.c
> F: drivers/i2c/busses/i2c-nct6694.c
> F: drivers/mfd/nct6694.c
> F: drivers/net/can/nct6694_canfd.c
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 08a3c863f80a..740e4afe6582 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1625,6 +1625,16 @@ config SENSORS_NCT6683
> This driver can also be built as a module. If so, the module
> will be called nct6683.
>
> +config SENSORS_NCT6694
> + tristate "Nuvoton NCT6694 Hardware Monitor support"
> + depends on MFD_NCT6694
> + help
> + Say Y here to support Nuvoton NCT6694 hardware monitoring
> + functionality.
> +
> + This driver can also be built as a module. If so, the module
> + will be called nct6694-hwmon.
> +
> config SENSORS_NCT6775_CORE
> tristate
> select REGMAP
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 9554d2fdcf7b..729961176d00 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
> obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
> obj-$(CONFIG_SENSORS_MR75203) += mr75203.o
> obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
> +obj-$(CONFIG_SENSORS_NCT6694) += nct6694-hwmon.o
> obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o
> nct6775-objs := nct6775-platform.o
> obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
> diff --git a/drivers/hwmon/nct6694-hwmon.c b/drivers/hwmon/nct6694-hwmon.c
> new file mode 100644
> index 000000000000..7d7d22a650b0
> --- /dev/null
> +++ b/drivers/hwmon/nct6694-hwmon.c
> @@ -0,0 +1,407 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Nuvoton NCT6694 HWMON driver based on USB interface.
> + *
> + * Copyright (C) 2024 Nuvoton Technology Corp.
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/hwmon.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/nct6694.h>
> +
> +#define DRVNAME "nct6694-hwmon"
> +
> +/* Host interface */
> +#define REQUEST_RPT_MOD 0xFF
> +#define REQUEST_HWMON_MOD 0x00
> +
> +/* Report Channel */
> +#define HWMON_FIN_IDX(x) (0x50 + ((x) * 2))
> +#define HWMON_FIN_STS(x) (0x6E + (x))
> +#define HWMON_PWM_IDX(x) (0x70 + (x))
> +
> +/* Message Channel*/
> +/* Command 00h */
> +#define REQUEST_HWMON_CMD0_LEN 0x40
> +#define REQUEST_HWMON_CMD0_OFFSET 0x0000 /* OFFSET = SEL|CMD */
> +#define HWMON_FIN_EN(x) (0x04 + (x))
> +#define HWMON_PWM_FREQ_IDX(x) (0x30 + (x))
> +/* Command 02h */
> +#define REQUEST_HWMON_CMD2_LEN 0x90
> +#define REQUEST_HWMON_CMD2_OFFSET 0x0002 /* OFFSET = SEL|CMD */
> +#define HWMON_SMI_CTRL_IDX 0x00
> +#define HWMON_FIN_LIMIT_IDX(x) (0x70 + ((x) * 2))
> +#define HWMON_CMD2_HYST_MASK 0x1F
> +/* Command 03h */
> +#define REQUEST_HWMON_CMD3_LEN 0x08
> +#define REQUEST_HWMON_CMD3_OFFSET 0x0003 /* OFFSET = SEL|CMD */
> +
> +struct nct6694_hwmon_data {
> + struct nct6694 *nct6694;
> +
> + /* Make sure read & write commands are consecutive */
> + struct mutex hwmon_lock;
> +};
> +
> +#define NCT6694_HWMON_FAN_CONFIG (HWMON_F_ENABLE | HWMON_F_INPUT | \
> + HWMON_F_MIN | HWMON_F_MIN_ALARM)
> +#define NCT6694_HWMON_PWM_CONFIG (HWMON_PWM_INPUT | HWMON_PWM_FREQ)
> +
> +static const struct hwmon_channel_info *nct6694_info[] = {
> + HWMON_CHANNEL_INFO(fan,
> + NCT6694_HWMON_FAN_CONFIG, /* FIN0 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN1 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN2 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN3 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN4 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN5 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN6 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN7 */
> + NCT6694_HWMON_FAN_CONFIG, /* FIN8 */
> + NCT6694_HWMON_FAN_CONFIG), /* FIN9 */
> +
> + HWMON_CHANNEL_INFO(pwm,
> + NCT6694_HWMON_PWM_CONFIG, /* PWM0 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM1 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM2 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM3 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM4 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM5 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM6 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM7 */
> + NCT6694_HWMON_PWM_CONFIG, /* PWM8 */
> + NCT6694_HWMON_PWM_CONFIG), /* PWM9 */
> + NULL
> +};
> +
> +static int nct6694_fan_read(struct device *dev, u32 attr, int channel,
> + long *val)
> +{
> + struct nct6694_hwmon_data *data = dev_get_drvdata(dev);
> + unsigned char buf[2];
> + int ret;
> +
> + switch (attr) {
> + case hwmon_fan_enable:
> + ret = nct6694_read_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD0_OFFSET,
> + REQUEST_HWMON_CMD0_LEN,
> + HWMON_FIN_EN(channel / 8),
> + 1, buf);
> + if (ret)
> + return -EINVAL;
> +
> + *val = buf[0] & BIT(channel % 8) ? 1 : 0;
> +
> + break;
> +
> + case hwmon_fan_input:
> + ret = nct6694_read_msg(data->nct6694, REQUEST_RPT_MOD,
> + HWMON_FIN_IDX(channel), 2, 0,
> + 2, buf);
> + if (ret)
> + return -EINVAL;
> +
> + *val = (buf[1] | (buf[0] << 8)) & 0xFFFF;
> +
> + break;
> +
> + case hwmon_fan_min:
> + ret = nct6694_read_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD2_OFFSET,
> + REQUEST_HWMON_CMD2_LEN,
> + HWMON_FIN_LIMIT_IDX(channel),
> + 2, buf);
> + if (ret)
> + return -EINVAL;
> +
> + *val = (buf[1] | (buf[0] << 8)) & 0xFFFF;
> +
> + break;
> +
> + case hwmon_fan_min_alarm:
> + ret = nct6694_read_msg(data->nct6694, REQUEST_RPT_MOD,
> + HWMON_FIN_STS(channel / 8),
> + 1, 0, 1, buf);
> + if (ret)
> + return -EINVAL;
> +
> + *val = buf[0] & BIT(channel % 8);
> +
> + break;
> +
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static int nct6694_pwm_read(struct device *dev, u32 attr, int channel,
> + long *val)
> +{
> + struct nct6694_hwmon_data *data = dev_get_drvdata(dev);
> + unsigned char buf;
> + int ret;
> +
> + switch (attr) {
> + case hwmon_pwm_input:
> + ret = nct6694_read_msg(data->nct6694, REQUEST_RPT_MOD,
> + HWMON_PWM_IDX(channel),
> + 1, 0, 1, &buf);
> + if (ret)
> + return -EINVAL;
> +
> + *val = buf;
> +
> + break;
> + case hwmon_pwm_freq:
> + ret = nct6694_read_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD0_OFFSET,
> + REQUEST_HWMON_CMD0_LEN,
> + HWMON_PWM_FREQ_IDX(channel),
> + 1, &buf);
> + if (ret)
> + return -EINVAL;
> +
> + *val = buf * 25000 / 255;
> +
> + break;
> +
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static int nct6694_fan_write(struct device *dev, u32 attr, int channel,
> + long val)
> +{
> + struct nct6694_hwmon_data *data = dev_get_drvdata(dev);
> + unsigned char enable_buf[REQUEST_HWMON_CMD0_LEN] = {0};
[Kalesh] Please try to maintain RCT order for variable declaration
> + unsigned char buf[REQUEST_HWMON_CMD2_LEN] = {0};
> + u16 fan_val = (u16)val;
> + int ret;
> +
> + switch (attr) {
> + case hwmon_fan_enable:
> + mutex_lock(&data->hwmon_lock);
> + ret = nct6694_read_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD0_OFFSET,
> + REQUEST_HWMON_CMD0_LEN, 0,
> + REQUEST_HWMON_CMD0_LEN,
> + enable_buf);
> + if (ret)
> + goto err;
> +
> + if (val)
> + enable_buf[HWMON_FIN_EN(channel / 8)] |= BIT(channel % 8);
> + else
> + enable_buf[HWMON_FIN_EN(channel / 8)] &= ~BIT(channel % 8);
> +
> + ret = nct6694_write_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD0_OFFSET,
> + REQUEST_HWMON_CMD0_LEN, enable_buf);
> + if (ret)
> + goto err;
> +
> + break;
> +
> + case hwmon_fan_min:
> + mutex_lock(&data->hwmon_lock);
> + ret = nct6694_read_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD2_OFFSET,
> + REQUEST_HWMON_CMD2_LEN, 0,
> + REQUEST_HWMON_CMD2_LEN, buf);
> + if (ret)
> + goto err;
> +
> + buf[HWMON_FIN_LIMIT_IDX(channel)] = (u8)((fan_val >> 8) & 0xFF);
> + buf[HWMON_FIN_LIMIT_IDX(channel) + 1] = (u8)(fan_val & 0xFF);
> + ret = nct6694_write_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD2_OFFSET,
> + REQUEST_HWMON_CMD2_LEN, buf);
> + if (ret)
> + goto err;
> +
> + break;
> +
> + default:
> + ret = -EOPNOTSUPP;
[Kalesh] If you initialize "ret = -EOPNOTSUPP;" during declararion,
you can just break from here.
> + goto err;
> + }
> +
> +err:
> + mutex_unlock(&data->hwmon_lock);
> + return ret;
> +}
> +
> +static int nct6694_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + switch (type) {
> + case hwmon_fan: /* in RPM */
> + return nct6694_fan_read(dev, attr, channel, val);
> +
> + case hwmon_pwm: /* in value 0~255 */
> + return nct6694_pwm_read(dev, attr, channel, val);
> +
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static int nct6694_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + switch (type) {
> + case hwmon_fan:
> + return nct6694_fan_write(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
[Kalesh] You can use simple if condition here than a switch like:
if (type != hwmon_fan)
return -EOPNOTSUPP;
return nct6694_fan_write(dev, attr, channel, val);
> +
> + return 0;
> +}
> +
> +static umode_t nct6694_is_visible(const void *data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + switch (type) {
> + case hwmon_fan:
> + switch (attr) {
> + case hwmon_fan_enable:
> + case hwmon_fan_min:
> + return 0644;
[Kalesh] I think there is no need to leave a new line in between cases
> +
> + case hwmon_fan_input:
> + case hwmon_fan_min_alarm:
> + return 0444;
> +
> + default:
> + return 0;
> + }
> +
> + case hwmon_pwm:
> + switch (attr) {
> + case hwmon_pwm_input:
> + case hwmon_pwm_freq:
> + return 0444;
> + default:
> + return 0;
> + }
> +
> + default:
> + return 0;
> + }
> +
> + return 0;
[Kalesh] This return statement looks redundant as the execution never
reaches here. Same comment applies to other functions above as well.
> +}
> +
> +static const struct hwmon_ops nct6694_hwmon_ops = {
> + .is_visible = nct6694_is_visible,
> + .read = nct6694_read,
> + .write = nct6694_write,
> +};
> +
> +static const struct hwmon_chip_info nct6694_chip_info = {
> + .ops = &nct6694_hwmon_ops,
> + .info = nct6694_info,
> +};
> +
> +static int nct6694_hwmon_init(struct nct6694_hwmon_data *data)
> +{
> + unsigned char buf[REQUEST_HWMON_CMD2_LEN] = {0};
> + int ret;
> +
> + /* Set Fan input Real Time alarm mode */
> + mutex_lock(&data->hwmon_lock);
> + ret = nct6694_read_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD2_OFFSET,
> + REQUEST_HWMON_CMD2_LEN, 0,
> + REQUEST_HWMON_CMD2_LEN, buf);
> + if (ret)
> + goto err;
[Kalesh] It would be better to rename the label as "unlock". Same
comment on other functions as well.
> +
> + buf[HWMON_SMI_CTRL_IDX] = 0x02;
> +
> + ret = nct6694_write_msg(data->nct6694, REQUEST_HWMON_MOD,
> + REQUEST_HWMON_CMD2_OFFSET,
> + REQUEST_HWMON_CMD2_LEN, buf);
> + if (ret)
> + goto err;
> +
> +err:
> + mutex_unlock(&data->hwmon_lock);
> + return ret;
> +}
> +
> +static int nct6694_hwmon_probe(struct platform_device *pdev)
> +{
> + struct nct6694_hwmon_data *data;
> + struct nct6694 *nct6694 = dev_get_drvdata(pdev->dev.parent);
> + struct device *hwmon_dev;
> + int ret;
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->nct6694 = nct6694;
> + mutex_init(&data->hwmon_lock);
> + platform_set_drvdata(pdev, data);
> +
> + ret = nct6694_hwmon_init(data);
> + if (ret)
> + return -EIO;
> +
> + /* Register hwmon device to HWMON framework */
> + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
> + "nct6694", data,
> + &nct6694_chip_info,
> + NULL);
> + if (IS_ERR(hwmon_dev)) {
> + dev_err(&pdev->dev, "%s: Failed to register hwmon device!\n",
> + __func__);
> + return PTR_ERR(hwmon_dev);
> + }
> +
> + return 0;
> +}
> +
> +static struct platform_driver nct6694_hwmon_driver = {
> + .driver = {
> + .name = DRVNAME,
> + },
> + .probe = nct6694_hwmon_probe,
> +};
> +
> +static int __init nct6694_init(void)
> +{
> + int err;
> +
> + err = platform_driver_register(&nct6694_hwmon_driver);
> + if (!err) {
> + if (err)
[Kalesh] This whole check looks strange. You can simplify this function as:
return platform_driver_register(&nct6694_hwmon_driver);
> + platform_driver_unregister(&nct6694_hwmon_driver);
> + }
> +
> + return err;
> +}
> +subsys_initcall(nct6694_init);
> +
> +static void __exit nct6694_exit(void)
> +{
> + platform_driver_unregister(&nct6694_hwmon_driver);
> +}
> +module_exit(nct6694_exit);
> +
> +MODULE_DESCRIPTION("USB-HWMON driver for NCT6694");
> +MODULE_AUTHOR("Ming Yu <tmyu0@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 2.34.1
>
>
--
Regards,
Kalesh A P
<<attachment: smime.p7s>>
