Remove platform data & initialize with defaults configuration & overwrite based on DT properties. Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx> --- Changes in V2: - Allow initializing the driver with defaults & overrid based on DT properties if specified. - Remove unrelated changes. - Optimise ppr check to remove unacceptable range. --- drivers/hwmon/max6639.c | 85 +++++++++++++++++++-------- include/linux/platform_data/max6639.h | 15 ----- 2 files changed, 62 insertions(+), 38 deletions(-) delete mode 100644 include/linux/platform_data/max6639.h diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index c955b0f3a8d3..6eacb5aed96d 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -19,7 +19,6 @@ #include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> -#include <linux/platform_data/max6639.h> #include <linux/regmap.h> #include <linux/util_macros.h> @@ -531,14 +530,51 @@ static int rpm_range_to_reg(int range) return 1; /* default: 4000 RPM */ } +static int max6639_probe_child_from_dt(struct i2c_client *client, + struct device_node *child, + struct max6639_data *data) + +{ + struct device *dev = &client->dev; + u32 i; + int err, val; + + err = of_property_read_u32(child, "reg", &i); + if (err) { + dev_err(dev, "missing reg property of %pOFn\n", child); + return err; + } + + if (i > 1) { + dev_err(dev, "Invalid fan index reg %d\n", i); + return -EINVAL; + } + + err = of_property_read_u32(child, "pulses-per-revolution", &val); + + if (!err) { + if (val < 1 || val > 5) { + dev_err(dev, "invalid pulses-per-revolution %d of %pOFn\n", val, child); + return -EINVAL; + } + data->ppr[i] = val; + } + + err = of_property_read_u32(child, "max-rpm", &val); + + if (!err) + data->rpm_range[i] = rpm_range_to_reg(val); + + return 0; +} + static int max6639_init_client(struct i2c_client *client, struct max6639_data *data) { - struct max6639_platform_data *max6639_info = - dev_get_platdata(&client->dev); - int i; - int rpm_range = 1; /* default: 4000 RPM */ - int err, ppr; + struct device *dev = &client->dev; + const struct device_node *np = dev->of_node; + struct device_node *child; + int i, err; /* Reset chip to default values, see below for GCONFIG setup */ err = regmap_write(data->regmap, MAX6639_REG_GCONFIG, MAX6639_GCONFIG_POR); @@ -546,21 +582,29 @@ static int max6639_init_client(struct i2c_client *client, return err; /* Fans pulse per revolution is 2 by default */ - if (max6639_info && max6639_info->ppr > 0 && - max6639_info->ppr < 5) - ppr = max6639_info->ppr; - else - ppr = 2; + data->ppr[0] = 2; + data->ppr[1] = 2; - data->ppr[0] = ppr; - data->ppr[1] = ppr; + /* default: 4000 RPM */ + data->rpm_range[0] = 1; + data->rpm_range[1] = 1; - if (max6639_info) - rpm_range = rpm_range_to_reg(max6639_info->rpm_range); - data->rpm_range[0] = rpm_range; - data->rpm_range[1] = rpm_range; + for_each_child_of_node(np, child) { + if (strcmp(child->name, "fan")) + continue; + + err = max6639_probe_child_from_dt(client, child, data); + if (err) { + of_node_put(child); + return err; + } + } for (i = 0; i < MAX6639_NUM_CHANNELS; i++) { + err = regmap_set_bits(data->regmap, MAX6639_REG_OUTPUT_MASK, BIT(1 - i)); + if (err) + return err; + /* Set Fan pulse per revolution */ err = max6639_set_ppr(data, i, data->ppr[i]); if (err) @@ -573,12 +617,7 @@ static int max6639_init_client(struct i2c_client *client, return err; /* Fans PWM polarity high by default */ - if (max6639_info) { - if (max6639_info->pwm_polarity == 0) - err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x00); - else - err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x02); - } + err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x00); if (err) return err; diff --git a/include/linux/platform_data/max6639.h b/include/linux/platform_data/max6639.h deleted file mode 100644 index 65bfdb4fdc15..000000000000 --- a/include/linux/platform_data/max6639.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_MAX6639_H -#define _LINUX_MAX6639_H - -#include <linux/types.h> - -/* platform data for the MAX6639 temperature sensor and fan control */ - -struct max6639_platform_data { - bool pwm_polarity; /* Polarity low (0) or high (1, default) */ - int ppr; /* Pulses per rotation 1..4 (default == 2) */ - int rpm_range; /* 2000, 4000 (default), 8000 or 16000 */ -}; - -#endif /* _LINUX_MAX6639_H */ -- 2.42.0