[PATCH v4 1/9] hwmon/misc: amd-sbi: Move core sbrmi from hwmon to misc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is done to support other functionality provided by the SBRMI, which
does not fit in the hwmon subsystem.

- Move the SBRMI core functionality and I2C device probing part to misc.
- Move hwmon device sensor to misc as only power is reported through
  hwmon sensor.

Signed-off-by: Akshay Gupta <akshay.gupta@xxxxxxx>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@xxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
Changes since v3:
Rebase the patch
Added Acked-by

Changes since v2:
Rebase the patch

Changes since v1:
- File name update
- Add hwmon sensor registration in this patch
- Update Copyright year

 drivers/hwmon/Kconfig            |  10 -
 drivers/hwmon/sbrmi.c            | 357 -------------------------------
 drivers/misc/Kconfig             |   1 +
 drivers/misc/Makefile            |   1 +
 drivers/misc/amd-sbi/Kconfig     |   9 +
 drivers/misc/amd-sbi/Makefile    |   3 +
 drivers/misc/amd-sbi/rmi-core.c  | 115 ++++++++++
 drivers/misc/amd-sbi/rmi-core.h  |  65 ++++++
 drivers/misc/amd-sbi/rmi-hwmon.c | 121 +++++++++++
 drivers/misc/amd-sbi/rmi-i2c.c   | 111 ++++++++++
 10 files changed, 426 insertions(+), 367 deletions(-)
 delete mode 100644 drivers/hwmon/sbrmi.c
 create mode 100644 drivers/misc/amd-sbi/Kconfig
 create mode 100644 drivers/misc/amd-sbi/Makefile
 create mode 100644 drivers/misc/amd-sbi/rmi-core.c
 create mode 100644 drivers/misc/amd-sbi/rmi-core.h
 create mode 100644 drivers/misc/amd-sbi/rmi-hwmon.c
 create mode 100644 drivers/misc/amd-sbi/rmi-i2c.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b60fe2e58ad6..20bd7126362c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1823,16 +1823,6 @@ config SENSORS_SBTSI
 	  This driver can also be built as a module. If so, the module will
 	  be called sbtsi_temp.
 
-config SENSORS_SBRMI
-	tristate "Emulated SB-RMI sensor"
-	depends on I2C
-	help
-	  If you say yes here you get support for emulated RMI
-	  sensors on AMD SoCs with APML interface connected to a BMC device.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called sbrmi.
-
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/hwmon/sbrmi.c b/drivers/hwmon/sbrmi.c
deleted file mode 100644
index d48d8e5460ff..000000000000
--- a/drivers/hwmon/sbrmi.c
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * sbrmi.c - hwmon driver for a SB-RMI mailbox
- *           compliant AMD SoC device.
- *
- * Copyright (C) 2020-2021 Advanced Micro Devices, Inc.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/hwmon.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of.h>
-
-/* Do not allow setting negative power limit */
-#define SBRMI_PWR_MIN	0
-/* Mask for Status Register bit[1] */
-#define SW_ALERT_MASK	0x2
-
-/* Software Interrupt for triggering */
-#define START_CMD	0x80
-#define TRIGGER_MAILBOX	0x01
-
-/*
- * SB-RMI supports soft mailbox service request to MP1 (power management
- * firmware) through SBRMI inbound/outbound message registers.
- * SB-RMI message IDs
- */
-enum sbrmi_msg_id {
-	SBRMI_READ_PKG_PWR_CONSUMPTION = 0x1,
-	SBRMI_WRITE_PKG_PWR_LIMIT,
-	SBRMI_READ_PKG_PWR_LIMIT,
-	SBRMI_READ_PKG_MAX_PWR_LIMIT,
-};
-
-/* SB-RMI registers */
-enum sbrmi_reg {
-	SBRMI_CTRL		= 0x01,
-	SBRMI_STATUS,
-	SBRMI_OUTBNDMSG0	= 0x30,
-	SBRMI_OUTBNDMSG1,
-	SBRMI_OUTBNDMSG2,
-	SBRMI_OUTBNDMSG3,
-	SBRMI_OUTBNDMSG4,
-	SBRMI_OUTBNDMSG5,
-	SBRMI_OUTBNDMSG6,
-	SBRMI_OUTBNDMSG7,
-	SBRMI_INBNDMSG0,
-	SBRMI_INBNDMSG1,
-	SBRMI_INBNDMSG2,
-	SBRMI_INBNDMSG3,
-	SBRMI_INBNDMSG4,
-	SBRMI_INBNDMSG5,
-	SBRMI_INBNDMSG6,
-	SBRMI_INBNDMSG7,
-	SBRMI_SW_INTERRUPT,
-};
-
-/* Each client has this additional data */
-struct sbrmi_data {
-	struct i2c_client *client;
-	struct mutex lock;
-	u32 pwr_limit_max;
-};
-
-struct sbrmi_mailbox_msg {
-	u8 cmd;
-	bool read;
-	u32 data_in;
-	u32 data_out;
-};
-
-static int sbrmi_enable_alert(struct i2c_client *client)
-{
-	int ctrl;
-
-	/*
-	 * Enable the SB-RMI Software alert status
-	 * by writing 0 to bit 4 of Control register(0x1)
-	 */
-	ctrl = i2c_smbus_read_byte_data(client, SBRMI_CTRL);
-	if (ctrl < 0)
-		return ctrl;
-
-	if (ctrl & 0x10) {
-		ctrl &= ~0x10;
-		return i2c_smbus_write_byte_data(client,
-						 SBRMI_CTRL, ctrl);
-	}
-
-	return 0;
-}
-
-static int rmi_mailbox_xfer(struct sbrmi_data *data,
-			    struct sbrmi_mailbox_msg *msg)
-{
-	int i, ret, retry = 10;
-	int sw_status;
-	u8 byte;
-
-	mutex_lock(&data->lock);
-
-	/* Indicate firmware a command is to be serviced */
-	ret = i2c_smbus_write_byte_data(data->client,
-					SBRMI_INBNDMSG7, START_CMD);
-	if (ret < 0)
-		goto exit_unlock;
-
-	/* Write the command to SBRMI::InBndMsg_inst0 */
-	ret = i2c_smbus_write_byte_data(data->client,
-					SBRMI_INBNDMSG0, msg->cmd);
-	if (ret < 0)
-		goto exit_unlock;
-
-	/*
-	 * For both read and write the initiator (BMC) writes
-	 * Command Data In[31:0] to SBRMI::InBndMsg_inst[4:1]
-	 * SBRMI_x3C(MSB):SBRMI_x39(LSB)
-	 */
-	for (i = 0; i < 4; i++) {
-		byte = (msg->data_in >> i * 8) & 0xff;
-		ret = i2c_smbus_write_byte_data(data->client,
-						SBRMI_INBNDMSG1 + i, byte);
-		if (ret < 0)
-			goto exit_unlock;
-	}
-
-	/*
-	 * Write 0x01 to SBRMI::SoftwareInterrupt to notify firmware to
-	 * perform the requested read or write command
-	 */
-	ret = i2c_smbus_write_byte_data(data->client,
-					SBRMI_SW_INTERRUPT, TRIGGER_MAILBOX);
-	if (ret < 0)
-		goto exit_unlock;
-
-	/*
-	 * Firmware will write SBRMI::Status[SwAlertSts]=1 to generate
-	 * an ALERT (if enabled) to initiator (BMC) to indicate completion
-	 * of the requested command
-	 */
-	do {
-		sw_status = i2c_smbus_read_byte_data(data->client,
-						     SBRMI_STATUS);
-		if (sw_status < 0) {
-			ret = sw_status;
-			goto exit_unlock;
-		}
-		if (sw_status & SW_ALERT_MASK)
-			break;
-		usleep_range(50, 100);
-	} while (retry--);
-
-	if (retry < 0) {
-		dev_err(&data->client->dev,
-			"Firmware fail to indicate command completion\n");
-		ret = -EIO;
-		goto exit_unlock;
-	}
-
-	/*
-	 * For a read operation, the initiator (BMC) reads the firmware
-	 * response Command Data Out[31:0] from SBRMI::OutBndMsg_inst[4:1]
-	 * {SBRMI_x34(MSB):SBRMI_x31(LSB)}.
-	 */
-	if (msg->read) {
-		for (i = 0; i < 4; i++) {
-			ret = i2c_smbus_read_byte_data(data->client,
-						       SBRMI_OUTBNDMSG1 + i);
-			if (ret < 0)
-				goto exit_unlock;
-			msg->data_out |= ret << i * 8;
-		}
-	}
-
-	/*
-	 * BMC must write 1'b1 to SBRMI::Status[SwAlertSts] to clear the
-	 * ALERT to initiator
-	 */
-	ret = i2c_smbus_write_byte_data(data->client, SBRMI_STATUS,
-					sw_status | SW_ALERT_MASK);
-
-exit_unlock:
-	mutex_unlock(&data->lock);
-	return ret;
-}
-
-static int sbrmi_read(struct device *dev, enum hwmon_sensor_types type,
-		      u32 attr, int channel, long *val)
-{
-	struct sbrmi_data *data = dev_get_drvdata(dev);
-	struct sbrmi_mailbox_msg msg = { 0 };
-	int ret;
-
-	if (type != hwmon_power)
-		return -EINVAL;
-
-	msg.read = true;
-	switch (attr) {
-	case hwmon_power_input:
-		msg.cmd = SBRMI_READ_PKG_PWR_CONSUMPTION;
-		ret = rmi_mailbox_xfer(data, &msg);
-		break;
-	case hwmon_power_cap:
-		msg.cmd = SBRMI_READ_PKG_PWR_LIMIT;
-		ret = rmi_mailbox_xfer(data, &msg);
-		break;
-	case hwmon_power_cap_max:
-		msg.data_out = data->pwr_limit_max;
-		ret = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-	if (ret < 0)
-		return ret;
-	/* hwmon power attributes are in microWatt */
-	*val = (long)msg.data_out * 1000;
-	return ret;
-}
-
-static int sbrmi_write(struct device *dev, enum hwmon_sensor_types type,
-		       u32 attr, int channel, long val)
-{
-	struct sbrmi_data *data = dev_get_drvdata(dev);
-	struct sbrmi_mailbox_msg msg = { 0 };
-
-	if (type != hwmon_power && attr != hwmon_power_cap)
-		return -EINVAL;
-	/*
-	 * hwmon power attributes are in microWatt
-	 * mailbox read/write is in mWatt
-	 */
-	val /= 1000;
-
-	val = clamp_val(val, SBRMI_PWR_MIN, data->pwr_limit_max);
-
-	msg.cmd = SBRMI_WRITE_PKG_PWR_LIMIT;
-	msg.data_in = val;
-	msg.read = false;
-
-	return rmi_mailbox_xfer(data, &msg);
-}
-
-static umode_t sbrmi_is_visible(const void *data,
-				enum hwmon_sensor_types type,
-				u32 attr, int channel)
-{
-	switch (type) {
-	case hwmon_power:
-		switch (attr) {
-		case hwmon_power_input:
-		case hwmon_power_cap_max:
-			return 0444;
-		case hwmon_power_cap:
-			return 0644;
-		}
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-static const struct hwmon_channel_info * const sbrmi_info[] = {
-	HWMON_CHANNEL_INFO(power,
-			   HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CAP_MAX),
-	NULL
-};
-
-static const struct hwmon_ops sbrmi_hwmon_ops = {
-	.is_visible = sbrmi_is_visible,
-	.read = sbrmi_read,
-	.write = sbrmi_write,
-};
-
-static const struct hwmon_chip_info sbrmi_chip_info = {
-	.ops = &sbrmi_hwmon_ops,
-	.info = sbrmi_info,
-};
-
-static int sbrmi_get_max_pwr_limit(struct sbrmi_data *data)
-{
-	struct sbrmi_mailbox_msg msg = { 0 };
-	int ret;
-
-	msg.cmd = SBRMI_READ_PKG_MAX_PWR_LIMIT;
-	msg.read = true;
-	ret = rmi_mailbox_xfer(data, &msg);
-	if (ret < 0)
-		return ret;
-	data->pwr_limit_max = msg.data_out;
-
-	return ret;
-}
-
-static int sbrmi_probe(struct i2c_client *client)
-{
-	struct device *dev = &client->dev;
-	struct device *hwmon_dev;
-	struct sbrmi_data *data;
-	int ret;
-
-	data = devm_kzalloc(dev, sizeof(struct sbrmi_data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->client = client;
-	mutex_init(&data->lock);
-
-	/* Enable alert for SB-RMI sequence */
-	ret = sbrmi_enable_alert(client);
-	if (ret < 0)
-		return ret;
-
-	/* Cache maximum power limit */
-	ret = sbrmi_get_max_pwr_limit(data);
-	if (ret < 0)
-		return ret;
-
-	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data,
-							 &sbrmi_chip_info, NULL);
-
-	return PTR_ERR_OR_ZERO(hwmon_dev);
-}
-
-static const struct i2c_device_id sbrmi_id[] = {
-	{"sbrmi"},
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, sbrmi_id);
-
-static const struct of_device_id __maybe_unused sbrmi_of_match[] = {
-	{
-		.compatible = "amd,sbrmi",
-	},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, sbrmi_of_match);
-
-static struct i2c_driver sbrmi_driver = {
-	.driver = {
-		.name = "sbrmi",
-		.of_match_table = of_match_ptr(sbrmi_of_match),
-	},
-	.probe = sbrmi_probe,
-	.id_table = sbrmi_id,
-};
-
-module_i2c_driver(sbrmi_driver);
-
-MODULE_AUTHOR("Akshay Gupta <akshay.gupta@xxxxxxx>");
-MODULE_DESCRIPTION("Hwmon driver for AMD SB-RMI emulated sensor");
-MODULE_LICENSE("GPL");
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 41c3d2821a78..add70bc22fee 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -618,4 +618,5 @@ source "drivers/misc/uacce/Kconfig"
 source "drivers/misc/pvpanic/Kconfig"
 source "drivers/misc/mchp_pci1xxxx/Kconfig"
 source "drivers/misc/keba/Kconfig"
+source "drivers/misc/amd-sbi/Kconfig"
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c2f990862d2b..5e70d2b34a11 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -71,3 +71,4 @@ obj-$(CONFIG_TPS6594_PFSM)	+= tps6594-pfsm.o
 obj-$(CONFIG_NSM)		+= nsm.o
 obj-$(CONFIG_MARVELL_CN10K_DPI)	+= mrvl_cn10k_dpi.o
 obj-y				+= keba/
+obj-y				+= amd-sbi/
diff --git a/drivers/misc/amd-sbi/Kconfig b/drivers/misc/amd-sbi/Kconfig
new file mode 100644
index 000000000000..be2d9e495eb7
--- /dev/null
+++ b/drivers/misc/amd-sbi/Kconfig
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config AMD_SBRMI_I2C
+        tristate "AMD side band RMI support"
+        depends on I2C
+        help
+          Side band RMI over I2C support for AMD out of band management.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called sbrmi-i2c.
diff --git a/drivers/misc/amd-sbi/Makefile b/drivers/misc/amd-sbi/Makefile
new file mode 100644
index 000000000000..eac90a7635de
--- /dev/null
+++ b/drivers/misc/amd-sbi/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+sbrmi-i2c-objs  		:= rmi-i2c.o rmi-core.o rmi-hwmon.o
+obj-$(CONFIG_AMD_SBRMI_I2C)	+= sbrmi-i2c.o
diff --git a/drivers/misc/amd-sbi/rmi-core.c b/drivers/misc/amd-sbi/rmi-core.c
new file mode 100644
index 000000000000..5d93fb703fa0
--- /dev/null
+++ b/drivers/misc/amd-sbi/rmi-core.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sbrmi-core.c - file defining SB-RMI protocols compliant
+ *		  AMD SoC device.
+ *
+ * Copyright (C) 2024 Advanced Micro Devices, Inc.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include "rmi-core.h"
+
+/* Mask for Status Register bit[1] */
+#define SW_ALERT_MASK	0x2
+/* Do not allow setting negative power limit */
+#define SBRMI_PWR_MIN	0
+
+/* Software Interrupt for triggering */
+#define START_CMD	0x80
+#define TRIGGER_MAILBOX	0x01
+
+int rmi_mailbox_xfer(struct sbrmi_data *data,
+		     struct sbrmi_mailbox_msg *msg)
+{
+	int i, ret, retry = 10;
+	int sw_status;
+	u8 byte;
+
+	mutex_lock(&data->lock);
+
+	/* Indicate firmware a command is to be serviced */
+	ret = i2c_smbus_write_byte_data(data->client,
+					SBRMI_INBNDMSG7, START_CMD);
+	if (ret < 0)
+		goto exit_unlock;
+
+	/* Write the command to SBRMI::InBndMsg_inst0 */
+	ret = i2c_smbus_write_byte_data(data->client,
+					SBRMI_INBNDMSG0, msg->cmd);
+	if (ret < 0)
+		goto exit_unlock;
+
+	/*
+	 * For both read and write the initiator (BMC) writes
+	 * Command Data In[31:0] to SBRMI::InBndMsg_inst[4:1]
+	 * SBRMI_x3C(MSB):SBRMI_x39(LSB)
+	 */
+	for (i = 0; i < 4; i++) {
+		byte = (msg->data_in >> i * 8) & 0xff;
+		ret = i2c_smbus_write_byte_data(data->client,
+						SBRMI_INBNDMSG1 + i, byte);
+		if (ret < 0)
+			goto exit_unlock;
+	}
+
+	/*
+	 * Write 0x01 to SBRMI::SoftwareInterrupt to notify firmware to
+	 * perform the requested read or write command
+	 */
+	ret = i2c_smbus_write_byte_data(data->client,
+					SBRMI_SW_INTERRUPT, TRIGGER_MAILBOX);
+	if (ret < 0)
+		goto exit_unlock;
+
+	/*
+	 * Firmware will write SBRMI::Status[SwAlertSts]=1 to generate
+	 * an ALERT (if enabled) to initiator (BMC) to indicate completion
+	 * of the requested command
+	 */
+	do {
+		sw_status = i2c_smbus_read_byte_data(data->client,
+						     SBRMI_STATUS);
+		if (sw_status < 0) {
+			ret = sw_status;
+			goto exit_unlock;
+		}
+		if (sw_status & SW_ALERT_MASK)
+			break;
+		usleep_range(50, 100);
+	} while (retry--);
+
+	if (retry < 0) {
+		dev_err(&data->client->dev,
+			"Firmware fail to indicate command completion\n");
+		ret = -EIO;
+		goto exit_unlock;
+	}
+
+	/*
+	 * For a read operation, the initiator (BMC) reads the firmware
+	 * response Command Data Out[31:0] from SBRMI::OutBndMsg_inst[4:1]
+	 * {SBRMI_x34(MSB):SBRMI_x31(LSB)}.
+	 */
+	if (msg->read) {
+		for (i = 0; i < 4; i++) {
+			ret = i2c_smbus_read_byte_data(data->client,
+						       SBRMI_OUTBNDMSG1 + i);
+			if (ret < 0)
+				goto exit_unlock;
+			msg->data_out |= ret << i * 8;
+		}
+	}
+
+	/*
+	 * BMC must write 1'b1 to SBRMI::Status[SwAlertSts] to clear the
+	 * ALERT to initiator
+	 */
+	ret = i2c_smbus_write_byte_data(data->client, SBRMI_STATUS,
+					sw_status | SW_ALERT_MASK);
+
+exit_unlock:
+	mutex_unlock(&data->lock);
+	return ret;
+}
diff --git a/drivers/misc/amd-sbi/rmi-core.h b/drivers/misc/amd-sbi/rmi-core.h
new file mode 100644
index 000000000000..3d600e450e08
--- /dev/null
+++ b/drivers/misc/amd-sbi/rmi-core.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2024 Advanced Micro Devices, Inc.
+ */
+
+#ifndef _SBRMI_CORE_H_
+#define _SBRMI_CORE_H_
+
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+
+/* SB-RMI registers */
+enum sbrmi_reg {
+	SBRMI_CTRL		= 0x01,
+	SBRMI_STATUS,
+	SBRMI_OUTBNDMSG0	= 0x30,
+	SBRMI_OUTBNDMSG1,
+	SBRMI_OUTBNDMSG2,
+	SBRMI_OUTBNDMSG3,
+	SBRMI_OUTBNDMSG4,
+	SBRMI_OUTBNDMSG5,
+	SBRMI_OUTBNDMSG6,
+	SBRMI_OUTBNDMSG7,
+	SBRMI_INBNDMSG0,
+	SBRMI_INBNDMSG1,
+	SBRMI_INBNDMSG2,
+	SBRMI_INBNDMSG3,
+	SBRMI_INBNDMSG4,
+	SBRMI_INBNDMSG5,
+	SBRMI_INBNDMSG6,
+	SBRMI_INBNDMSG7,
+	SBRMI_SW_INTERRUPT,
+};
+
+/*
+ * SB-RMI supports soft mailbox service request to MP1 (power management
+ * firmware) through SBRMI inbound/outbound message registers.
+ * SB-RMI message IDs
+ */
+enum sbrmi_msg_id {
+	SBRMI_READ_PKG_PWR_CONSUMPTION = 0x1,
+	SBRMI_WRITE_PKG_PWR_LIMIT,
+	SBRMI_READ_PKG_PWR_LIMIT,
+	SBRMI_READ_PKG_MAX_PWR_LIMIT,
+};
+
+/* Each client has this additional data */
+struct sbrmi_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	struct platform_device *pdev;
+	u32 pwr_limit_max;
+};
+
+struct sbrmi_mailbox_msg {
+	u8 cmd;
+	bool read;
+	u32 data_in;
+	u32 data_out;
+};
+
+int rmi_mailbox_xfer(struct sbrmi_data *data, struct sbrmi_mailbox_msg *msg);
+int create_hwmon_sensor_device(struct device *dev, struct sbrmi_data *data);
+#endif /*_SBRMI_CORE_H_*/
diff --git a/drivers/misc/amd-sbi/rmi-hwmon.c b/drivers/misc/amd-sbi/rmi-hwmon.c
new file mode 100644
index 000000000000..36913f105eef
--- /dev/null
+++ b/drivers/misc/amd-sbi/rmi-hwmon.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * rmi-hwmon.c - hwmon sensor support for side band RMI
+ *
+ * Copyright (C) 2024 Advanced Micro Devices, Inc.
+ */
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include "rmi-core.h"
+
+/* Do not allow setting negative power limit */
+#define SBRMI_PWR_MIN  0
+
+static int sbrmi_read(struct device *dev, enum hwmon_sensor_types type,
+		      u32 attr, int channel, long *val)
+{
+	struct sbrmi_data *data = dev_get_drvdata(dev);
+	struct sbrmi_mailbox_msg msg = { 0 };
+	int ret;
+
+	if (!data)
+		return -ENODEV;
+
+	if (type != hwmon_power)
+		return -EINVAL;
+
+	msg.read = true;
+	switch (attr) {
+	case hwmon_power_input:
+		msg.cmd = SBRMI_READ_PKG_PWR_CONSUMPTION;
+		ret = rmi_mailbox_xfer(data, &msg);
+		break;
+	case hwmon_power_cap:
+		msg.cmd = SBRMI_READ_PKG_PWR_LIMIT;
+		ret = rmi_mailbox_xfer(data, &msg);
+		break;
+	case hwmon_power_cap_max:
+		msg.data_out = data->pwr_limit_max;
+		ret = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (ret < 0)
+		return ret;
+	/* hwmon power attributes are in microWatt */
+	*val = (long)msg.data_out * 1000;
+	return ret;
+}
+
+static int sbrmi_write(struct device *dev, enum hwmon_sensor_types type,
+		       u32 attr, int channel, long val)
+{
+	struct sbrmi_data *data = dev_get_drvdata(dev);
+	struct sbrmi_mailbox_msg msg = { 0 };
+
+	if (!data)
+		return -ENODEV;
+
+	if (type != hwmon_power && attr != hwmon_power_cap)
+		return -EINVAL;
+	/*
+	 * hwmon power attributes are in microWatt
+	 * mailbox read/write is in mWatt
+	 */
+	val /= 1000;
+
+	val = clamp_val(val, SBRMI_PWR_MIN, data->pwr_limit_max);
+
+	msg.cmd = SBRMI_WRITE_PKG_PWR_LIMIT;
+	msg.data_in = val;
+	msg.read = false;
+
+	return rmi_mailbox_xfer(data, &msg);
+}
+
+static umode_t sbrmi_is_visible(const void *data,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_power:
+		switch (attr) {
+		case hwmon_power_input:
+		case hwmon_power_cap_max:
+			return 0444;
+		case hwmon_power_cap:
+			return 0644;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static const struct hwmon_channel_info * const sbrmi_info[] = {
+	HWMON_CHANNEL_INFO(power,
+			   HWMON_P_INPUT | HWMON_P_CAP | HWMON_P_CAP_MAX),
+	NULL
+};
+
+static const struct hwmon_ops sbrmi_hwmon_ops = {
+	.is_visible = sbrmi_is_visible,
+	.read = sbrmi_read,
+	.write = sbrmi_write,
+};
+
+static const struct hwmon_chip_info sbrmi_chip_info = {
+	.ops = &sbrmi_hwmon_ops,
+	.info = sbrmi_info,
+};
+
+int create_hwmon_sensor_device(struct device *dev, struct sbrmi_data *data)
+{
+	struct device *hwmon_dev;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "sbrmi", data,
+							 &sbrmi_chip_info, NULL);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
diff --git a/drivers/misc/amd-sbi/rmi-i2c.c b/drivers/misc/amd-sbi/rmi-i2c.c
new file mode 100644
index 000000000000..ae968cf3c29c
--- /dev/null
+++ b/drivers/misc/amd-sbi/rmi-i2c.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * rmi-i2c.c - Side band RMI over I2C support for AMD out
+ *             of band management
+ *
+ * Copyright (C) 2024 Advanced Micro Devices, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include "rmi-core.h"
+
+#define SBRMI_CTRL	0x1
+
+static int sbrmi_enable_alert(struct i2c_client *client)
+{
+	int ctrl;
+
+	/*
+	 * Enable the SB-RMI Software alert status
+	 * by writing 0 to bit 4 of Control register(0x1)
+	 */
+	ctrl = i2c_smbus_read_byte_data(client, SBRMI_CTRL);
+	if (ctrl < 0)
+		return ctrl;
+
+	if (ctrl & 0x10) {
+		ctrl &= ~0x10;
+		return i2c_smbus_write_byte_data(client,
+						 SBRMI_CTRL, ctrl);
+	}
+
+	return 0;
+}
+
+static int sbrmi_get_max_pwr_limit(struct sbrmi_data *data)
+{
+	struct sbrmi_mailbox_msg msg = { 0 };
+	int ret;
+
+	msg.cmd = SBRMI_READ_PKG_MAX_PWR_LIMIT;
+	msg.read = true;
+	ret = rmi_mailbox_xfer(data, &msg);
+	if (ret < 0)
+		return ret;
+	data->pwr_limit_max = msg.data_out;
+
+	return ret;
+}
+
+static int sbrmi_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct sbrmi_data *data;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(struct sbrmi_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->lock);
+
+	/* Enable alert for SB-RMI sequence */
+	ret = sbrmi_enable_alert(client);
+	if (ret < 0)
+		return ret;
+
+	/* Cache maximum power limit */
+	ret = sbrmi_get_max_pwr_limit(data);
+	if (ret < 0)
+		return ret;
+
+	dev_set_drvdata(dev, data);
+	return create_hwmon_sensor_device(dev, data);
+}
+
+static const struct i2c_device_id sbrmi_id[] = {
+	{"sbrmi-i2c"},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, sbrmi_id);
+
+static const struct of_device_id __maybe_unused sbrmi_of_match[] = {
+	{
+		.compatible = "amd,sbrmi",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sbrmi_of_match);
+
+static struct i2c_driver sbrmi_driver = {
+	.driver = {
+		.name = "sbrmi-i2c",
+		.of_match_table = of_match_ptr(sbrmi_of_match),
+	},
+	.probe = sbrmi_i2c_probe,
+	.id_table = sbrmi_id,
+};
+
+module_i2c_driver(sbrmi_driver);
+
+MODULE_AUTHOR("Akshay Gupta <akshay.gupta@xxxxxxx>");
+MODULE_AUTHOR("Naveen Krishna Chatradhi <naveenkrishna.chatradhi@xxxxxxx>");
+MODULE_DESCRIPTION("Hwmon driver for AMD SB-RMI emulated sensor");
+MODULE_LICENSE("GPL");
-- 
2.25.1





[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux