Re: [PATCH v6 3/3] hwmon: (isl28022) support shunt voltage for ISL28022 power monitor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/5/24 23:14, Delphine CC Chiu wrote:
Added support reading shunt voltage in mV and revise code
for Renesas ISL28022.

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
---
  drivers/hwmon/isl28022.c | 93 ++++++++++++++++++++++++++++------------
  1 file changed, 66 insertions(+), 27 deletions(-)

diff --git a/drivers/hwmon/isl28022.c b/drivers/hwmon/isl28022.c
index f0494c3bd483..01220fad813d 100644
--- a/drivers/hwmon/isl28022.c
+++ b/drivers/hwmon/isl28022.c
@@ -85,8 +85,6 @@ struct isl28022_data {
  	u32			shunt;
  	u32			gain;
  	u32			average;
-	u16			config;
-	u16			calib;

I don't see the point of separating this part of the driver from the first patch
in the series. It makes me review code only to be replaced later. I am not going
to do that.

  };
static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
@@ -95,20 +93,61 @@ static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
  	struct isl28022_data *data = dev_get_drvdata(dev);
  	unsigned int regval;
  	int err;
+	u16 sign_bit;
switch (type) {
  	case hwmon_in:
-		switch (attr) {
-		case hwmon_in_input:
-			err = regmap_read(data->regmap,
-					  ISL28022_REG_BUS, &regval);
-			if (err < 0)
-				return err;
-			/* driver supports only 60V mode (BRNG 11) */
-			*val = (long)(((u16)regval) & 0xFFFC);
+		switch (channel) {
+		case 0:
+			switch (attr) {
+			case hwmon_in_input:
+				err = regmap_read(data->regmap,
+						  ISL28022_REG_BUS, &regval);
+				if (err < 0)
+					return err;
+				/* driver supports only 60V mode (BRNG 11) */
+				*val = (long)(((u16)regval) & 0xFFFC);
+				break;
+			default:
+				return -EOPNOTSUPP;
+			}
+			break;
+		case 1:
+			switch (attr) {
+			case hwmon_in_input:
+				err = regmap_read(data->regmap,
+						  ISL28022_REG_SHUNT, &regval);
+				if (err < 0)
+					return err;
+			switch (data->gain) {
+			case 8:
+				sign_bit = (regval >> 15) & 0x01;
+				*val = (long)((((u16)regval) & 0x7FFF) -
+					   (sign_bit * 32768)) / 100;
+				break;
+			case 4:
+				sign_bit = (regval >> 14) & 0x01;
+				*val = (long)((((u16)regval) & 0x3FFF) -
+					   (sign_bit * 16384)) / 100;
+				break;
+			case 2:
+				sign_bit = (regval >> 13) & 0x01;
+				*val = (long)((((u16)regval) & 0x1FFF) -
+					   (sign_bit * 8192)) / 100;
+				break;
+			case 1:
+				sign_bit = (regval >> 12) & 0x01;
+				*val = (long)((((u16)regval) & 0x0FFF) -
+					   (sign_bit * 4096)) / 100;
+				break;
+			}
+			break;
+			default:
+				return -EOPNOTSUPP;
+			}

Separate into its own voltage read function, and also provide separate functions
for current and power.

Guenter





[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux