Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andi,

On 03.09.24 17:13, Andi Shyti wrote:
Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
among which an amc6821 and devices that are reachable through an I2C-mux.
The devices on the mux can be selected by writing the appropriate device
number to an I2C config register (amc6821 reg 0xff).

This driver is expected to be probed as a platform device with amc6821
as its parent i2c device.

Add support for the mule-i2c-mux platform driver. The amc6821 driver
Along the driver I expressed some concern about the prefixes.

You should avoid prefixes such as mux_* or MUX_* because they
don't belong to your driver. You should always use your driver's
name:

  1. mule_*
  2. mule_mux_*
  3. mule_i2c_mux_*

You have used the 3rd, I'd rather prefer the 1st. Because when
you are in i2c/muxex/ it's implied that you are an i2c mux
device. But it's a matter of personal taste.


Are you here referring to the commit log, module name or function prefixes ? (because  later you suggested that we use "mule_i2c_mux_*" for functions)

"Mule" is a chip that requires multiple drivers that will be added later on, and I suppose we don't want conflict with other module names ?


Thanks,

Farouk





[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux