On Fri, Aug 30, 2024 at 01:13:50PM +0200, Pawel Dembicki wrote:
> In the LTC2991, V5 and V6 channels use the low nibble of the
> "V5, V6, V7, and V8 Control Register" for configuration, but currently,
> the high nibble is defined.
>
> This patch changes the defines to use the low nibble.
>
> Fixes: 2b9ea4262ae9 ("hwmon: Add driver for ltc2991")
> Signed-off-by: Pawel Dembicki <paweldembicki@xxxxxxxxx>
Applied.
Thanks,
Guenter
> ---
> drivers/hwmon/ltc2991.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hwmon/ltc2991.c b/drivers/hwmon/ltc2991.c
> index 573cd8f5721b..7ca139e4b6af 100644
> --- a/drivers/hwmon/ltc2991.c
> +++ b/drivers/hwmon/ltc2991.c
> @@ -42,9 +42,9 @@
> #define LTC2991_V7_V8_FILT_EN BIT(7)
> #define LTC2991_V7_V8_TEMP_EN BIT(5)
> #define LTC2991_V7_V8_DIFF_EN BIT(4)
> -#define LTC2991_V5_V6_FILT_EN BIT(7)
> -#define LTC2991_V5_V6_TEMP_EN BIT(5)
> -#define LTC2991_V5_V6_DIFF_EN BIT(4)
> +#define LTC2991_V5_V6_FILT_EN BIT(3)
> +#define LTC2991_V5_V6_TEMP_EN BIT(1)
> +#define LTC2991_V5_V6_DIFF_EN BIT(0)
>
> #define LTC2991_REPEAT_ACQ_EN BIT(4)
> #define LTC2991_T_INT_FILT_EN BIT(3)
