Convert driver to use the with_info hardware monitoring API
to reduce its dependency on sysfs attribute functions.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/ina2xx.c | 494 ++++++++++++++++++++++++-----------------
1 file changed, 293 insertions(+), 201 deletions(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 14136c96533f..e9e8482c32bc 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -25,9 +25,9 @@
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/err.h>
#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -35,6 +35,7 @@
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
+#include <linux/sysfs.h>
#include <linux/util_macros.h>
/* common register definitions */
@@ -81,9 +82,6 @@
#define INA226_ALERT_CONFIG_MASK GENMASK(15, 10)
#define INA226_ALERT_FUNCTION_FLAG BIT(4)
-/* common attrs, ina226 attrs and NULL */
-#define INA2XX_MAX_ATTRIBUTE_GROUPS 3
-
/*
* Both bus voltage and shunt voltage conversion times for ina226 are set
* to 0b0100 on POR, which translates to 2200 microseconds in total.
@@ -145,8 +143,6 @@ struct ina2xx_data {
long power_lsb_uW;
struct mutex config_lock;
struct regmap *regmap;
-
- const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS];
};
static const struct ina2xx_config ina2xx_config[] = {
@@ -191,7 +187,7 @@ static int ina226_reg_to_interval(u16 config)
* Return the new, shifted AVG field value of CONFIG register,
* to use with regmap_update_bits
*/
-static u16 ina226_interval_to_reg(unsigned long interval)
+static u16 ina226_interval_to_reg(long interval)
{
int avg, avg_bits;
@@ -245,14 +241,19 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
return val;
}
-static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval)
+/*
+ * Read and convert register value from chip. If the register value is 0,
+ * check if the chip has been power cycled or reset. If so, re-initialize it.
+ */
+static int ina2xx_read_init(struct device *dev, int reg, long *val)
{
struct ina2xx_data *data = dev_get_drvdata(dev);
struct regmap *regmap = data->regmap;
+ unsigned int regval;
int ret, retry;
for (retry = 5; retry; retry--) {
- ret = regmap_read(regmap, reg, regval);
+ ret = regmap_read(regmap, reg, ®val);
if (ret < 0)
return ret;
@@ -264,7 +265,7 @@ static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval)
* We do that extra read of the calibration register if there
* is some hint of a chip reset.
*/
- if (*regval == 0) {
+ if (regval == 0) {
unsigned int cal;
ret = regmap_read_bypassed(regmap, INA2XX_CALIBRATION, &cal);
@@ -286,6 +287,7 @@ static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval)
continue;
}
}
+ *val = ina2xx_get_value(data, reg, regval);
return 0;
}
@@ -298,46 +300,6 @@ static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval)
return -ENODEV;
}
-static ssize_t ina2xx_value_show(struct device *dev,
- struct device_attribute *da, char *buf)
-{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- struct ina2xx_data *data = dev_get_drvdata(dev);
- unsigned int regval;
-
- int err = ina2xx_read_reg(dev, attr->index, ®val);
-
- if (err < 0)
- return err;
-
- return sysfs_emit(buf, "%d\n", ina2xx_get_value(data, attr->index, regval));
-}
-
-static int ina226_reg_to_alert(struct ina2xx_data *data, u32 mask, u16 regval)
-{
- int reg;
-
- switch (mask) {
- case INA226_SHUNT_OVER_VOLTAGE_MASK:
- case INA226_SHUNT_UNDER_VOLTAGE_MASK:
- reg = INA2XX_SHUNT_VOLTAGE;
- break;
- case INA226_BUS_OVER_VOLTAGE_MASK:
- case INA226_BUS_UNDER_VOLTAGE_MASK:
- reg = INA2XX_BUS_VOLTAGE;
- break;
- case INA226_POWER_OVER_LIMIT_MASK:
- reg = INA2XX_POWER;
- break;
- default:
- /* programmer goofed */
- WARN_ON_ONCE(1);
- return 0;
- }
-
- return ina2xx_get_value(data, reg, regval);
-}
-
/*
* Turns alert limit values into register values.
* Opposite of the formula in ina2xx_get_value().
@@ -367,14 +329,10 @@ static u16 ina226_alert_to_reg(struct ina2xx_data *data, u32 mask, unsigned long
}
}
-static ssize_t ina226_alert_show(struct device *dev,
- struct device_attribute *da, char *buf)
+static int ina226_alert_limit_read(struct ina2xx_data *data, u32 mask, int reg, long *val)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- struct ina2xx_data *data = dev_get_drvdata(dev);
struct regmap *regmap = data->regmap;
int regval;
- int val = 0;
int ret;
mutex_lock(&data->config_lock);
@@ -382,32 +340,26 @@ static ssize_t ina226_alert_show(struct device *dev,
if (ret)
goto abort;
- if (regval & attr->index) {
+ if (regval & mask) {
ret = regmap_read(regmap, INA226_ALERT_LIMIT, ®val);
if (ret)
goto abort;
- val = ina226_reg_to_alert(data, attr->index, regval);
+ *val = ina2xx_get_value(data, reg, regval);
+ } else {
+ *val = 0;
}
-
- ret = sysfs_emit(buf, "%d\n", val);
abort:
mutex_unlock(&data->config_lock);
return ret;
}
-static ssize_t ina226_alert_store(struct device *dev,
- struct device_attribute *da,
- const char *buf, size_t count)
+static int ina226_alert_limit_write(struct ina2xx_data *data, u32 mask, long val)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- struct ina2xx_data *data = dev_get_drvdata(dev);
struct regmap *regmap = data->regmap;
- unsigned long val;
int ret;
- ret = kstrtoul(buf, 10, &val);
- if (ret < 0)
- return ret;
+ if (val < 0)
+ return -EINVAL;
/*
* Clear all alerts first to avoid accidentally triggering ALERT pin
@@ -421,43 +373,286 @@ static ssize_t ina226_alert_store(struct device *dev,
goto abort;
ret = regmap_write(regmap, INA226_ALERT_LIMIT,
- ina226_alert_to_reg(data, attr->index, val));
+ ina226_alert_to_reg(data, mask, val));
if (ret < 0)
goto abort;
- if (val != 0) {
+ if (val)
ret = regmap_update_bits(regmap, INA226_MASK_ENABLE,
INA226_ALERT_CONFIG_MASK | INA226_ALERT_LATCH_ENABLE,
- attr->index | INA226_ALERT_LATCH_ENABLE);
- if (ret < 0)
- goto abort;
- }
-
- ret = count;
+ mask | INA226_ALERT_LATCH_ENABLE);
abort:
mutex_unlock(&data->config_lock);
return ret;
}
-static ssize_t ina226_alarm_show(struct device *dev,
- struct device_attribute *da, char *buf)
+static int ina2xx_chip_read(struct device *dev, u32 attr, long *val)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct ina2xx_data *data = dev_get_drvdata(dev);
- unsigned int mask;
- int alarm = 0;
+ u32 regval;
int ret;
- ret = regmap_read_bypassed(data->regmap, INA226_MASK_ENABLE, &mask);
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ ret = regmap_read(data->regmap, INA2XX_CONFIG, ®val);
+ if (ret)
+ return ret;
+
+ *val = ina226_reg_to_interval(regval);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int ina226_alert_read(struct regmap *regmap, u32 mask, long *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read_bypassed(regmap, INA226_MASK_ENABLE, ®val);
if (ret)
return ret;
- alarm = (mask & attr->index) &&
- (mask & INA226_ALERT_FUNCTION_FLAG);
+ *val = (regval & mask) && (regval & INA226_ALERT_FUNCTION_FLAG);
- return sysfs_emit(buf, "%d\n", alarm);
+ return 0;
}
+static int ina2xx_in_read(struct device *dev, u32 attr, int channel, long *val)
+{
+ int voltage_reg = channel ? INA2XX_BUS_VOLTAGE : INA2XX_SHUNT_VOLTAGE;
+ u32 under_voltage_mask = channel ? INA226_BUS_UNDER_VOLTAGE_MASK
+ : INA226_SHUNT_UNDER_VOLTAGE_MASK;
+ u32 over_voltage_mask = channel ? INA226_BUS_OVER_VOLTAGE_MASK
+ : INA226_SHUNT_OVER_VOLTAGE_MASK;
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ unsigned int regval;
+ int ret;
+
+ switch (attr) {
+ case hwmon_in_input:
+ ret = regmap_read(regmap, voltage_reg, ®val);
+ if (ret)
+ return ret;
+ *val = ina2xx_get_value(data, voltage_reg, regval);
+ break;
+ case hwmon_in_lcrit:
+ return ina226_alert_limit_read(data, under_voltage_mask,
+ voltage_reg, val);
+ case hwmon_in_crit:
+ return ina226_alert_limit_read(data, over_voltage_mask,
+ voltage_reg, val);
+ case hwmon_in_lcrit_alarm:
+ return ina226_alert_read(regmap, under_voltage_mask, val);
+ case hwmon_in_crit_alarm:
+ return ina226_alert_read(regmap, over_voltage_mask, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int ina2xx_power_read(struct device *dev, u32 attr, long *val)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+
+ switch (attr) {
+ case hwmon_power_input:
+ return ina2xx_read_init(dev, INA2XX_POWER, val);
+ case hwmon_power_crit:
+ return ina226_alert_limit_read(data, INA226_POWER_OVER_LIMIT_MASK,
+ INA2XX_POWER, val);
+ case hwmon_power_crit_alarm:
+ return ina226_alert_read(data->regmap, INA226_POWER_OVER_LIMIT_MASK, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int ina2xx_curr_read(struct device *dev, u32 attr, long *val)
+{
+ switch (attr) {
+ case hwmon_curr_input:
+ return ina2xx_read_init(dev, INA2XX_CURRENT, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int ina2xx_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ switch (type) {
+ case hwmon_chip:
+ return ina2xx_chip_read(dev, attr, val);
+ case hwmon_in:
+ return ina2xx_in_read(dev, attr, channel, val);
+ case hwmon_power:
+ return ina2xx_power_read(dev, attr, val);
+ case hwmon_curr:
+ return ina2xx_curr_read(dev, attr, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int ina2xx_chip_write(struct device *dev, u32 attr, long val)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ return regmap_update_bits(data->regmap, INA2XX_CONFIG,
+ INA226_AVG_RD_MASK,
+ ina226_interval_to_reg(val));
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int ina2xx_in_write(struct device *dev, u32 attr, int channel, long val)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+
+ switch (attr) {
+ case hwmon_in_lcrit:
+ return ina226_alert_limit_write(data,
+ channel ? INA226_BUS_UNDER_VOLTAGE_MASK : INA226_SHUNT_UNDER_VOLTAGE_MASK,
+ val);
+ case hwmon_in_crit:
+ return ina226_alert_limit_write(data,
+ channel ? INA226_BUS_OVER_VOLTAGE_MASK : INA226_SHUNT_OVER_VOLTAGE_MASK,
+ val);
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int ina2xx_power_write(struct device *dev, u32 attr, long val)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+
+ switch (attr) {
+ case hwmon_power_crit:
+ return ina226_alert_limit_write(data, INA226_POWER_OVER_LIMIT_MASK, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int ina2xx_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ switch (type) {
+ case hwmon_chip:
+ return ina2xx_chip_write(dev, attr, val);
+ case hwmon_in:
+ return ina2xx_in_write(dev, attr, channel, val);
+ case hwmon_power:
+ return ina2xx_power_write(dev, attr, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t ina2xx_is_visible(const void *_data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct ina2xx_data *data = _data;
+ enum ina2xx_ids chip = data->chip;
+
+ switch (type) {
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_input:
+ return 0444;
+ case hwmon_in_lcrit:
+ case hwmon_in_crit:
+ if (chip == ina226)
+ return 0644;
+ break;
+ case hwmon_in_lcrit_alarm:
+ case hwmon_in_crit_alarm:
+ if (chip == ina226)
+ return 0444;
+ break;
+ default:
+ break;
+ }
+ break;
+ case hwmon_curr:
+ switch (attr) {
+ case hwmon_curr_input:
+ return 0444;
+ default:
+ break;
+ }
+ break;
+ case hwmon_power:
+ switch (attr) {
+ case hwmon_power_input:
+ return 0444;
+ case hwmon_power_crit:
+ if (chip == ina226)
+ return 0644;
+ break;
+ case hwmon_power_crit_alarm:
+ if (chip == ina226)
+ return 0444;
+ break;
+ default:
+ break;
+ }
+ break;
+ case hwmon_chip:
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ if (chip == ina226)
+ return 0644;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static const struct hwmon_channel_info * const ina2xx_info[] = {
+ HWMON_CHANNEL_INFO(chip,
+ HWMON_C_UPDATE_INTERVAL),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT | HWMON_I_CRIT | HWMON_I_CRIT_ALARM |
+ HWMON_I_LCRIT | HWMON_I_LCRIT_ALARM,
+ HWMON_I_INPUT | HWMON_I_CRIT | HWMON_I_CRIT_ALARM |
+ HWMON_I_LCRIT | HWMON_I_LCRIT_ALARM
+ ),
+ HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT),
+ HWMON_CHANNEL_INFO(power,
+ HWMON_P_INPUT | HWMON_P_CRIT | HWMON_P_CRIT_ALARM),
+ NULL
+};
+
+static const struct hwmon_ops ina2xx_hwmon_ops = {
+ .is_visible = ina2xx_is_visible,
+ .read = ina2xx_read,
+ .write = ina2xx_write,
+};
+
+static const struct hwmon_chip_info ina2xx_chip_info = {
+ .ops = &ina2xx_hwmon_ops,
+ .info = ina2xx_info,
+};
+
+/* shunt resistance */
+
/*
* In order to keep calibration register value fixed, the product
* of current_lsb and shunt_resistor should also be fixed and equal
@@ -479,21 +674,21 @@ static int ina2xx_set_shunt(struct ina2xx_data *data, unsigned long val)
return 0;
}
-static ssize_t ina2xx_shunt_show(struct device *dev,
- struct device_attribute *da, char *buf)
+static ssize_t shunt_resistor_show(struct device *dev,
+ struct device_attribute *da, char *buf)
{
struct ina2xx_data *data = dev_get_drvdata(dev);
return sysfs_emit(buf, "%li\n", data->rshunt);
}
-static ssize_t ina2xx_shunt_store(struct device *dev,
- struct device_attribute *da,
- const char *buf, size_t count)
+static ssize_t shunt_resistor_store(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
unsigned long val;
int status;
- struct ina2xx_data *data = dev_get_drvdata(dev);
status = kstrtoul(buf, 10, &val);
if (status < 0)
@@ -507,114 +702,14 @@ static ssize_t ina2xx_shunt_store(struct device *dev,
return count;
}
-static ssize_t ina226_interval_store(struct device *dev,
- struct device_attribute *da,
- const char *buf, size_t count)
-{
- struct ina2xx_data *data = dev_get_drvdata(dev);
- unsigned long val;
- int status;
-
- status = kstrtoul(buf, 10, &val);
- if (status < 0)
- return status;
-
- status = regmap_update_bits(data->regmap, INA2XX_CONFIG,
- INA226_AVG_RD_MASK,
- ina226_interval_to_reg(val));
- if (status < 0)
- return status;
-
- return count;
-}
-
-static ssize_t ina226_interval_show(struct device *dev,
- struct device_attribute *da, char *buf)
-{
- struct ina2xx_data *data = dev_get_drvdata(dev);
- int status;
- unsigned int regval;
-
- status = regmap_read(data->regmap, INA2XX_CONFIG, ®val);
- if (status)
- return status;
-
- return sysfs_emit(buf, "%d\n", ina226_reg_to_interval(regval));
-}
-
-/* shunt voltage */
-static SENSOR_DEVICE_ATTR_RO(in0_input, ina2xx_value, INA2XX_SHUNT_VOLTAGE);
-/* shunt voltage over/under voltage alert setting and alarm */
-static SENSOR_DEVICE_ATTR_RW(in0_crit, ina226_alert,
- INA226_SHUNT_OVER_VOLTAGE_MASK);
-static SENSOR_DEVICE_ATTR_RW(in0_lcrit, ina226_alert,
- INA226_SHUNT_UNDER_VOLTAGE_MASK);
-static SENSOR_DEVICE_ATTR_RO(in0_crit_alarm, ina226_alarm,
- INA226_SHUNT_OVER_VOLTAGE_MASK);
-static SENSOR_DEVICE_ATTR_RO(in0_lcrit_alarm, ina226_alarm,
- INA226_SHUNT_UNDER_VOLTAGE_MASK);
-
-/* bus voltage */
-static SENSOR_DEVICE_ATTR_RO(in1_input, ina2xx_value, INA2XX_BUS_VOLTAGE);
-/* bus voltage over/under voltage alert setting and alarm */
-static SENSOR_DEVICE_ATTR_RW(in1_crit, ina226_alert,
- INA226_BUS_OVER_VOLTAGE_MASK);
-static SENSOR_DEVICE_ATTR_RW(in1_lcrit, ina226_alert,
- INA226_BUS_UNDER_VOLTAGE_MASK);
-static SENSOR_DEVICE_ATTR_RO(in1_crit_alarm, ina226_alarm,
- INA226_BUS_OVER_VOLTAGE_MASK);
-static SENSOR_DEVICE_ATTR_RO(in1_lcrit_alarm, ina226_alarm,
- INA226_BUS_UNDER_VOLTAGE_MASK);
-
-/* calculated current */
-static SENSOR_DEVICE_ATTR_RO(curr1_input, ina2xx_value, INA2XX_CURRENT);
-
-/* calculated power */
-static SENSOR_DEVICE_ATTR_RO(power1_input, ina2xx_value, INA2XX_POWER);
-/* over-limit power alert setting and alarm */
-static SENSOR_DEVICE_ATTR_RW(power1_crit, ina226_alert,
- INA226_POWER_OVER_LIMIT_MASK);
-static SENSOR_DEVICE_ATTR_RO(power1_crit_alarm, ina226_alarm,
- INA226_POWER_OVER_LIMIT_MASK);
-
-/* shunt resistance */
-static SENSOR_DEVICE_ATTR_RW(shunt_resistor, ina2xx_shunt, INA2XX_CALIBRATION);
-
-/* update interval (ina226 only) */
-static SENSOR_DEVICE_ATTR_RW(update_interval, ina226_interval, 0);
+static DEVICE_ATTR_RW(shunt_resistor);
/* pointers to created device attributes */
static struct attribute *ina2xx_attrs[] = {
- &sensor_dev_attr_in0_input.dev_attr.attr,
- &sensor_dev_attr_in1_input.dev_attr.attr,
- &sensor_dev_attr_curr1_input.dev_attr.attr,
- &sensor_dev_attr_power1_input.dev_attr.attr,
- &sensor_dev_attr_shunt_resistor.dev_attr.attr,
+ &dev_attr_shunt_resistor.attr,
NULL,
};
-
-static const struct attribute_group ina2xx_group = {
- .attrs = ina2xx_attrs,
-};
-
-static struct attribute *ina226_attrs[] = {
- &sensor_dev_attr_in0_crit.dev_attr.attr,
- &sensor_dev_attr_in0_lcrit.dev_attr.attr,
- &sensor_dev_attr_in0_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_in0_lcrit_alarm.dev_attr.attr,
- &sensor_dev_attr_in1_crit.dev_attr.attr,
- &sensor_dev_attr_in1_lcrit.dev_attr.attr,
- &sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_in1_lcrit_alarm.dev_attr.attr,
- &sensor_dev_attr_power1_crit.dev_attr.attr,
- &sensor_dev_attr_power1_crit_alarm.dev_attr.attr,
- &sensor_dev_attr_update_interval.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group ina226_group = {
- .attrs = ina226_attrs,
-};
+ATTRIBUTE_GROUPS(ina2xx);
/*
* Initialize chip
@@ -656,8 +751,8 @@ static int ina2xx_probe(struct i2c_client *client)
struct device *dev = &client->dev;
struct ina2xx_data *data;
struct device *hwmon_dev;
- int ret, group = 0;
enum ina2xx_ids chip;
+ int ret;
chip = (uintptr_t)i2c_get_match_data(client);
@@ -684,12 +779,9 @@ static int ina2xx_probe(struct i2c_client *client)
if (ret < 0)
return dev_err_probe(dev, ret, "failed to configure device\n");
- data->groups[group++] = &ina2xx_group;
- if (chip == ina226)
- data->groups[group++] = &ina226_group;
-
- hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
- data, data->groups);
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+ data, &ina2xx_chip_info,
+ ina2xx_groups);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
--
2.45.2
