There are no in-tree users of ina2xx platform data. Drop it and support
device properties instead as alternative if it should ever be needed.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/ina2xx.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index a6a619a85eb6..897657f8d685 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -30,13 +30,11 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/util_macros.h>
-#include <linux/platform_data/ina2xx.h>
-
/* common register definitions */
#define INA2XX_CONFIG 0x00
#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */
@@ -643,14 +641,8 @@ static int ina2xx_probe(struct i2c_client *client)
data->config = &ina2xx_config[chip];
mutex_init(&data->config_lock);
- if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
- struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
-
- if (pdata)
- val = pdata->shunt_uohms;
- else
- val = INA2XX_RSHUNT_DEFAULT;
- }
+ if (device_property_read_u32(dev, "shunt-resistor", &val) < 0)
+ val = INA2XX_RSHUNT_DEFAULT;
ina2xx_set_shunt(data, val);
@@ -667,7 +659,7 @@ static int ina2xx_probe(struct i2c_client *client)
return dev_err_probe(dev, ret, "failed to enable vs regulator\n");
if (chip == ina226) {
- if (of_property_read_bool(dev->of_node, "ti,alert-polarity-active-high")) {
+ if (device_property_read_bool(dev, "ti,alert-polarity-active-high")) {
ret = ina2xx_set_alert_polarity(data,
INA226_ALERT_POL_HIGH);
if (ret < 0) {
--
2.45.2
