- AMD provides custom protocol to read Processor feature
capabilities and configuration information through side band.
The information is accessed by providing CPUID Function,
extended function and thread ID to the protocol.
Undefined function returns 0.
Signed-off-by: Akshay Gupta <akshay.gupta@xxxxxxx>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@xxxxxxx>
---
Changes since v1:
- bifurcated from previous patch 5
drivers/misc/amd-sbi/rmi-core.c | 170 ++++++++++++++++++++++++++++++++
drivers/misc/amd-sbi/rmi-core.h | 5 +-
include/uapi/misc/amd-apml.h | 15 +++
3 files changed, 189 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/amd-sbi/rmi-core.c b/drivers/misc/amd-sbi/rmi-core.c
index 01c3a6c9c15c..57625bc1b4de 100644
--- a/drivers/misc/amd-sbi/rmi-core.c
+++ b/drivers/misc/amd-sbi/rmi-core.c
@@ -17,6 +17,8 @@
/* Mask for Status Register bit[1] */
#define SW_ALERT_MASK 0x2
+/* Mask to check H/W Alert status bit */
+#define HW_ALERT_MASK 0x80
/* Do not allow setting negative power limit */
#define SBRMI_PWR_MIN 0
@@ -24,6 +26,171 @@
#define START_CMD 0x80
#define TRIGGER_MAILBOX 0x01
+/* Default message lengths as per APML command protocol */
+/* CPUID */
+#define CPUID_RD_DATA_LEN 0x8
+#define CPUID_WR_DATA_LEN 0x8
+#define CPUID_RD_REG_LEN 0xa
+#define CPUID_WR_REG_LEN 0x9
+
+/* CPUID MSR Command Ids */
+#define CPUID_MCA_CMD 0x73
+#define RD_CPUID_CMD 0x91
+
+/* input for bulk write to CPUID protocol */
+struct cpu_msr_indata {
+ u8 wr_len; /* const value */
+ u8 rd_len; /* const value */
+ u8 proto_cmd; /* const value */
+ u8 thread; /* thread number */
+ union {
+ u8 reg_offset[4]; /* input value */
+ u32 value;
+ };
+ u8 ext; /* extended function */
+} __packed;
+
+/* output for bulk read from CPUID protocol */
+struct cpu_msr_outdata {
+ u8 num_bytes; /* number of bytes return */
+ u8 status; /* Protocol status code */
+ union {
+ u64 value;
+ u8 reg_data[8];
+ };
+} __packed;
+
+#define prepare_cpuid_input_message(input, thread_id, func, ext_func) \
+ input.rd_len = CPUID_RD_DATA_LEN, \
+ input.wr_len = CPUID_WR_DATA_LEN, \
+ input.proto_cmd = RD_CPUID_CMD, \
+ input.thread = thread_id << 1, \
+ input.value = func, \
+ input.ext = ext_func
+
+/*
+ * For Mailbox command software alert status bit is set by firmware
+ * to indicate command completion
+ * For RMI Rev 0x20, new h/w status bit is introduced. which is used
+ * by firmware to indicate completion of commands (0x71, 0x72, 0x73).
+ * wait for the status bit to be set by the firmware before
+ * reading the data out.
+ */
+static int sbrmi_wait_status(struct sbrmi_data *data,
+ int *status, int mask)
+{
+ int ret, retry = 100;
+
+ do {
+ ret = regmap_read(data->regmap, SBRMI_STATUS, status);
+ if (ret < 0)
+ return ret;
+
+ if (*status & mask)
+ break;
+
+ /* Wait 1~2 second for firmware to return data out */
+ if (retry > 95)
+ usleep_range(50, 100);
+ else
+ usleep_range(10000, 20000);
+ } while (retry--);
+
+ if (retry < 0)
+ ret = -ETIMEDOUT;
+ return ret;
+}
+
+static int sbrmi_get_rev(struct sbrmi_data *data)
+{
+ struct apml_message msg = { 0 };
+ int ret;
+
+ msg.data_in.reg_in[REG_OFF_INDEX] = SBRMI_REV;
+ msg.data_in.reg_in[RD_FLAG_INDEX] = 1;
+ ret = regmap_read(data->regmap,
+ msg.data_in.reg_in[REG_OFF_INDEX],
+ &msg.data_out.mb_out[RD_WR_DATA_INDEX]);
+ if (ret < 0)
+ return ret;
+
+ data->rev = msg.data_out.reg_out[RD_WR_DATA_INDEX];
+ return 0;
+}
+
+/* Read CPUID function protocol */
+static int rmi_cpuid_read(struct sbrmi_data *data,
+ struct apml_message *msg)
+{
+ struct cpu_msr_indata input = {0};
+ struct cpu_msr_outdata output = {0};
+ int val = 0;
+ int ret, hw_status;
+ u16 thread;
+
+ mutex_lock(&data->lock);
+ /* cache the rev value to identify if protocol is supported or not */
+ if (!data->rev) {
+ ret = sbrmi_get_rev(data);
+ if (ret < 0)
+ goto exit_unlock;
+ }
+ /* CPUID protocol for REV 0x10 is not supported*/
+ if (data->rev == 0x10) {
+ ret = -EOPNOTSUPP;
+ goto exit_unlock;
+ }
+
+ thread = msg->data_in.reg_in[THREAD_LOW_INDEX] |
+ msg->data_in.reg_in[THREAD_HI_INDEX] << 8;
+
+ /* Thread > 127, Thread128 CS register, 1'b1 needs to be set to 1 */
+ if (thread > 127) {
+ thread -= 128;
+ val = 1;
+ }
+ ret = regmap_write(data->regmap, SBRMI_THREAD128CS, val);
+ if (ret < 0)
+ goto exit_unlock;
+
+ prepare_cpuid_input_message(input, thread,
+ msg->data_in.mb_in[RD_WR_DATA_INDEX],
+ msg->data_in.reg_in[EXT_FUNC_INDEX]);
+
+ ret = regmap_bulk_write(data->regmap, CPUID_MCA_CMD,
+ &input, CPUID_WR_REG_LEN);
+ if (ret < 0)
+ goto exit_unlock;
+
+ ret = sbrmi_wait_status(data, &hw_status, HW_ALERT_MASK);
+ if (ret < 0)
+ goto exit_unlock;
+
+ ret = regmap_bulk_read(data->regmap, CPUID_MCA_CMD,
+ &output, CPUID_RD_REG_LEN);
+ if (ret < 0)
+ goto exit_unlock;
+
+ ret = regmap_write(data->regmap, SBRMI_STATUS,
+ HW_ALERT_MASK);
+ if (ret < 0)
+ goto exit_unlock;
+
+ if (output.num_bytes != CPUID_RD_REG_LEN - 1) {
+ ret = -EMSGSIZE;
+ goto exit_unlock;
+ }
+ if (output.status) {
+ ret = -EPROTOTYPE;
+ msg->fw_ret_code = output.status;
+ goto exit_unlock;
+ }
+ msg->data_out.cpu_msr_out = output.value;
+exit_unlock:
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
int rmi_mailbox_xfer(struct sbrmi_data *data,
struct apml_message *msg)
{
@@ -147,6 +314,9 @@ static long sbrmi_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
/* Mailbox protocol */
ret = rmi_mailbox_xfer(data, &msg);
break;
+ case APML_CPUID:
+ ret = rmi_cpuid_read(data, &msg);
+ break;
default:
pr_err("Command:0x%x not recognized\n", msg.cmd);
break;
diff --git a/drivers/misc/amd-sbi/rmi-core.h b/drivers/misc/amd-sbi/rmi-core.h
index b728f5582256..529c8284dec4 100644
--- a/drivers/misc/amd-sbi/rmi-core.h
+++ b/drivers/misc/amd-sbi/rmi-core.h
@@ -15,7 +15,8 @@
/* SB-RMI registers */
enum sbrmi_reg {
- SBRMI_CTRL = 0x01,
+ SBRMI_REV = 0x00,
+ SBRMI_CTRL,
SBRMI_STATUS,
SBRMI_OUTBNDMSG0 = 0x30,
SBRMI_OUTBNDMSG1,
@@ -34,6 +35,7 @@ enum sbrmi_reg {
SBRMI_INBNDMSG6,
SBRMI_INBNDMSG7,
SBRMI_SW_INTERRUPT,
+ SBRMI_THREAD128CS = 0x4b,
};
/*
@@ -56,6 +58,7 @@ struct sbrmi_data {
struct mutex lock;
u32 pwr_limit_max;
u8 dev_static_addr;
+ u8 rev;
};
int rmi_mailbox_xfer(struct sbrmi_data *data, struct apml_message *msg);
diff --git a/include/uapi/misc/amd-apml.h b/include/uapi/misc/amd-apml.h
index 06e93a6a8f4b..21ea8c65daa6 100644
--- a/include/uapi/misc/amd-apml.h
+++ b/include/uapi/misc/amd-apml.h
@@ -7,10 +7,15 @@
#include <linux/types.h>
+/* command ID to identify CPUID protocol */
+#define APML_CPUID 0x1000
/* These are byte indexes into data_in and data_out arrays */
#define RD_WR_DATA_INDEX 0
#define REG_OFF_INDEX 0
#define REG_VAL_INDEX 4
+#define THREAD_LOW_INDEX 4
+#define THREAD_HI_INDEX 5
+#define EXT_FUNC_INDEX 6
#define RD_FLAG_INDEX 7
#define MB_DATA_SIZE 4
@@ -18,27 +23,37 @@
struct apml_message {
/* message ids:
* Mailbox Messages: 0x0 ... 0x999
+ * APML_CPUID: 0x1000
*/
__u32 cmd;
/*
* 8 bit data for reg read,
* 32 bit data in case of mailbox,
+ * up to 64 bit in case of cpuid
*/
union {
+ __u64 cpu_msr_out;
__u32 mb_out[2];
__u8 reg_out[8];
} data_out;
/*
* [0]...[3] mailbox 32bit input
+ * cpuid,
+ * [4][5] cpuid: thread
+ * [6] cpuid: ext function & read eax/ebx or ecx/edx
+ * [7:0] -> bits [7:4] -> ext function &
+ * bit [0] read eax/ebx or ecx/edx
* [7] read/write functionality
*/
union {
+ __u64 cpu_msr_in;
__u32 mb_in[2];
__u8 reg_in[8];
} data_in;
/*
+ * Status code is returned in case of CPUID access
* Error code is returned in case of soft mailbox
*/
__u32 fw_ret_code;
--
2.44.0
