The chip does not have a fan divisor. What it does have is a configuration
to set either 2 or 4 pulses per fan rotation. Rename the attribute to
reflect its use. Update documentation accordingly.
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
Documentation/hwmon/amc6821.rst | 2 +-
drivers/hwmon/amc6821.c | 26 +++++++++++++-------------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst
index 5ddb2849da90..4ce67c268e52 100644
--- a/Documentation/hwmon/amc6821.rst
+++ b/Documentation/hwmon/amc6821.rst
@@ -47,7 +47,7 @@ fan1_input ro tachometer speed
fan1_min rw "
fan1_max rw "
fan1_fault ro "
-fan1_div rw Fan divisor can be either 2 or 4.
+fan1_pulses rw Pulses per revolution can be either 2 or 4.
pwm1 rw pwm1
pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index e37257ae1a6b..6eb7edd9aca9 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -148,7 +148,7 @@ struct amc6821_data {
int temp[TEMP_IDX_LEN];
u16 fan[FAN1_IDX_LEN];
- u8 fan1_div;
+ u8 fan1_pulses;
u8 pwm1;
u8 temp1_auto_point_temp[3];
@@ -193,9 +193,9 @@ static struct amc6821_data *amc6821_update_device(struct device *dev)
client,
fan_reg_hi[i]) << 8;
}
- data->fan1_div = i2c_smbus_read_byte_data(client,
+ data->fan1_pulses = i2c_smbus_read_byte_data(client,
AMC6821_REG_CONF4);
- data->fan1_div = data->fan1_div & AMC6821_CONF4_PSPR ? 4 : 2;
+ data->fan1_pulses = data->fan1_pulses & AMC6821_CONF4_PSPR ? 4 : 2;
data->pwm1_auto_point_pwm[0] = 0;
data->pwm1_auto_point_pwm[2] = 255;
@@ -645,16 +645,16 @@ static ssize_t fan_store(struct device *dev, struct device_attribute *attr,
return count;
}
-static ssize_t fan1_div_show(struct device *dev,
- struct device_attribute *devattr, char *buf)
+static ssize_t fan1_pulses_show(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
struct amc6821_data *data = amc6821_update_device(dev);
- return sprintf(buf, "%d\n", data->fan1_div);
+ return sprintf(buf, "%d\n", data->fan1_pulses);
}
-static ssize_t fan1_div_store(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t count)
+static ssize_t fan1_pulses_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
{
struct amc6821_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
@@ -674,11 +674,11 @@ static ssize_t fan1_div_store(struct device *dev,
switch (val) {
case 2:
config &= ~AMC6821_CONF4_PSPR;
- data->fan1_div = 2;
+ data->fan1_pulses = 2;
break;
case 4:
config |= AMC6821_CONF4_PSPR;
- data->fan1_div = 4;
+ data->fan1_pulses = 4;
break;
default:
count = -EINVAL;
@@ -713,7 +713,7 @@ static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, IDX_FAN1_INPUT);
static SENSOR_DEVICE_ATTR_RW(fan1_min, fan, IDX_FAN1_MIN);
static SENSOR_DEVICE_ATTR_RW(fan1_max, fan, IDX_FAN1_MAX);
static SENSOR_DEVICE_ATTR_RO(fan1_fault, fan1_fault, 0);
-static SENSOR_DEVICE_ATTR_RW(fan1_div, fan1_div, 0);
+static SENSOR_DEVICE_ATTR_RW(fan1_pulses, fan1_pulses, 0);
static SENSOR_DEVICE_ATTR_RW(pwm1, pwm1, 0);
static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm1_enable, 0);
@@ -756,7 +756,7 @@ static struct attribute *amc6821_attrs[] = {
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_max.dev_attr.attr,
&sensor_dev_attr_fan1_fault.dev_attr.attr,
- &sensor_dev_attr_fan1_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_pulses.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
--
2.39.2
