On 6/26/24 07:24, Alex Vdovydchenko wrote:
Add support for MPS Hot-Swap controller mp5920. This driver exposes
telemetry and limits value readings and writtings.
limit
writings
Is there a patch 1/2 and/or a summary patch ?
Signed-off-by: Alex Vdovydchenko <xzeol@xxxxxxxxx>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/mp5920.rst | 91 +++++++++++++++++++++++++++++++++
drivers/hwmon/pmbus/Kconfig | 9 ++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/mp5920.c | 93 ++++++++++++++++++++++++++++++++++
5 files changed, 195 insertions(+)
create mode 100644 Documentation/hwmon/mp5920.rst
create mode 100644 drivers/hwmon/pmbus/mp5920.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index e92a3d5c7..9eba7e402 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -168,6 +168,7 @@ Hardware Monitoring Kernel Drivers
mp2975
mp2993
mp5023
+ mp5920
mp5990
mp9941
mpq8785
diff --git a/Documentation/hwmon/mp5920.rst b/Documentation/hwmon/mp5920.rst
new file mode 100644
--- /dev/null
+++ b/Documentation/hwmon/mp5920.rst
@@ -0,0 +1,91 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp5920
+====================
+
+Supported chips:
+
+ * MPS MP5920
+
+ Prefix: 'mp5920'
+
+ * Datasheet
+
+ Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5920.html
+
+Authors:
+
+ Tony Ao <tony_ao@xxxxxxxxxx>
+ Alex Vdovydchenko <xzeol@xxxxxxxxx>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP5920 Hot-Swap Controller.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct and linear format for reading input voltage,
+output voltage, output current, input power and temperature.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_rated_max**
+
+**in1_rated_min**
+
+**in1_crit**
+
+**in1_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_rated_max**
+
+**in2_rated_min**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_crit**
+
+**curr1_alarm**
+
+**curr1_rated_max**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+**power1_max**
+
+**power1_rated_max**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_crit**
+
+**temp1_alarm**
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -371,6 +371,15 @@ config SENSORS_MP5023
This driver can also be built as a module. If so, the module will
be called mp5023.
+config SENSORS_MP5920
+ tristate "MPS MP5920"
+ help
+ If you say yes here you get hardware monitoring support for Monolithic
+ MP5920.
+
+ This driver can also be built as a module. If so, the module will
+ be called mp5920.
+
config SENSORS_MP5990
tristate "MPS MP5990"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_SENSORS_MP2888) += mp2888.o
obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
obj-$(CONFIG_SENSORS_MP2993) += mp2993.o
obj-$(CONFIG_SENSORS_MP5023) += mp5023.o
+obj-$(CONFIG_SENSORS_MP5920) += mp5920.o
obj-$(CONFIG_SENSORS_MP5990) += mp5990.o
obj-$(CONFIG_SENSORS_MP9941) += mp9941.o
obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o
diff --git a/drivers/hwmon/pmbus/mp5920.c b/drivers/hwmon/pmbus/mp5920.c
new file mode 100644
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp5920.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for MP5920 and compatible chips.
+ *
+ * Copyright (c) 2019 Facebook Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
This blob is unnecessary; it is covered by the SPDX license reference above.
+ */
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
Not needed or used.
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info mp5920_info = {
+ pages = 1,
+ format[PSC_VOLTAGE_IN] = direct,
+ format[PSC_VOLTAGE_OUT] = direct,
+ format[PSC_CURRENT_OUT] = direct,
+ format[PSC_POWER] = direct,
+ format[PSC_TEMPERATURE] = direct,
+ m[PSC_VOLTAGE_IN] = 2266,
+ b[PSC_VOLTAGE_IN] = 0,
+ R[PSC_VOLTAGE_IN] = -1,
+ m[PSC_VOLTAGE_OUT] = 2266,
+ b[PSC_VOLTAGE_OUT] = 0,
+ R[PSC_VOLTAGE_OUT] = -1,
+ m[PSC_CURRENT_OUT] = 546,
+ b[PSC_CURRENT_OUT] = 0,
+ R[PSC_CURRENT_OUT] = -2,
+ m[PSC_POWER] = 5840,
+ b[PSC_POWER] = 0,
+ R[PSC_POWER] = -3,
+ m[PSC_TEMPERATURE] = 1067,
+ b[PSC_TEMPERATURE] = 20500,
+ R[PSC_TEMPERATURE] = -2,
+ func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
+ PMBUS_HAVE_TEMP,
+};
+
+static int mp5920_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ int chip_id;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENODEV;
+
+ chip_id = i2c_smbus_read_word_data(client, PMBUS_MFR_ID);
+ if (chip_id < 0) {
+ dev_err(dev, "Failed to read MFR ID");
+ return chip_id;
+ }
What is the point of reading the chip ID without doing anything with it ?
+
+ return pmbus_do_probe(client, &mp5920_info);
+}
+
+static const struct of_device_id mp5920_of_match[] = {
+ { .compatible = "mps,mp5920" },
+ {}
+};
+
+static const struct i2c_device_id mp5920_id[] = {
+ {"mp5920", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mp5920_id);
+
+static struct i2c_driver mp5920_driver = {
+ .driver = {
+ .name = "mp5920",
+ .of_match_table = mp5920_of_match,
+ },
+ .probe = mp5920_probe,
+ .id_table = mp5920_id,
+};
+module_i2c_driver(mp5920_driver);
+
+MODULE_AUTHOR("Tony Ao <tony_ao@xxxxxxxxxx>");
+MODULE_AUTHOR("Alex Vdovydchenko <xzeol@xxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for MP5920 HSC");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
