Hi,
On 4/6/24 14:02, Guenter Roeck wrote:
Add support for SPD5118 (Jedec JESD300) compliant temperature
sensors. Such sensors are typically found on DDR5 memory modules.
Cc: René Rebe <rene@xxxxxxxxxxxx>
Cc: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
Reviewed-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
Tested-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
v4: No change
v3: Shorten JESD300-5B.01 to JESD300; 5B.01 refers to the version
of the standard
Drop unnecessary 'attr' parameter from spd5118_{read,write}_enable()
v2: Drop PEC property documentation
Add note indicating that alarm attributes are sticky until read
to documentation
Fix detect function
Fix misspelling in Makefile (CONFIG_SENSORS_SPD5118->CONFIG_SENSORS_SPD5118)
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/spd5118.rst | 55 ++++
drivers/hwmon/Kconfig | 12 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/spd5118.c | 481 ++++++++++++++++++++++++++++++++
5 files changed, 550 insertions(+)
create mode 100644 Documentation/hwmon/spd5118.rst
create mode 100644 drivers/hwmon/spd5118.c
It seems to report correct temperatures for my sticks, so I guess:
Tested-by: Stephen Horvath <s.horvath@xxxxxxxxxxxxxx>
Thanks,
Steve
