Currently, k10temp_get_ccd_support() takes as input "pdev" and "data".
However, "pdev" is already included in "data". Furthermore, the "pdev"
parameter is no longer used in k10temp_get_ccd_support(), since its use
was moved into read_ccd_temp_reg().
Drop the "pdev" input parameter as it is no longer needed.
No functional change is intended.
Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx>
Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/k10temp.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 315c52de6e54..6deb272c7cef 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -385,8 +385,7 @@ static const struct hwmon_chip_info k10temp_chip_info = {
.info = k10temp_info,
};
-static void k10temp_get_ccd_support(struct pci_dev *pdev,
- struct k10temp_data *data, int limit)
+static void k10temp_get_ccd_support(struct k10temp_data *data, int limit)
{
u32 regval;
int i;
@@ -456,18 +455,18 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
case 0x11: /* Zen APU */
case 0x18: /* Zen+ APU */
data->ccd_offset = 0x154;
- k10temp_get_ccd_support(pdev, data, 4);
+ k10temp_get_ccd_support(data, 4);
break;
case 0x31: /* Zen2 Threadripper */
case 0x60: /* Renoir */
case 0x68: /* Lucienne */
case 0x71: /* Zen2 */
data->ccd_offset = 0x154;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0xa0 ... 0xaf:
data->ccd_offset = 0x300;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
}
} else if (boot_cpu_data.x86 == 0x19) {
@@ -481,21 +480,21 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
case 0x21: /* Zen3 Ryzen Desktop */
case 0x50 ... 0x5f: /* Green Sardine */
data->ccd_offset = 0x154;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0x40 ... 0x4f: /* Yellow Carp */
data->ccd_offset = 0x300;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0x60 ... 0x6f:
case 0x70 ... 0x7f:
data->ccd_offset = 0x308;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0x10 ... 0x1f:
case 0xa0 ... 0xaf:
data->ccd_offset = 0x300;
- k10temp_get_ccd_support(pdev, data, 12);
+ k10temp_get_ccd_support(data, 12);
break;
}
} else if (boot_cpu_data.x86 == 0x1a) {
--
2.34.1
