Add support for xdp710 device from Infineon vendor.
This is a Hot-Swap Controller.
Signed-off-by: Peter Yin <peteryin.openbmc@xxxxxxxxx>
---
drivers/hwmon/pmbus/Kconfig | 9 ++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/xdp710.c | 155 +++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 drivers/hwmon/pmbus/xdp710.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 557ae0c414b0..d72bdecf758a 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -511,6 +511,15 @@ config SENSORS_UCD9200
This driver can also be built as a module. If so, the module will
be called ucd9200.
+config SENSORS_XDP710
+ tristate "Infineon XDP710 family"
+ help
+ If you say yes here you get hardware monitoring support for Infineon
+ XDP710 device.
+
+ This driver can also be built as a module. If so, the module will
+ be called xdp710.
+
config SENSORS_XDPE152
tristate "Infineon XDPE152 family"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index f14ecf03ad77..4fe630793721 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_TPS546D24) += tps546d24.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
+obj-$(CONFIG_SENSORS_XDP710) += xdp710.o
obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
obj-$(CONFIG_SENSORS_XDPE152) += xdpe152c4.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
diff --git a/drivers/hwmon/pmbus/xdp710.c b/drivers/hwmon/pmbus/xdp710.c
new file mode 100644
index 000000000000..3ed324bd0db6
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdp710.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Infineon XDP710 Hot-Swap Controller
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/bitops.h>
+#include "pmbus.h"
+
+#define XDP710_REG_CFG (0xD3)
+#define XDP710_V_SNS_CFG (0xD4)
+#define XDP710_CS_RNG (0xD5)
+
+struct xdp710_data {
+ struct pmbus_driver_info info;
+ u8 cs_rng;
+ u8 vtlm_rng;
+ int rsense;
+};
+
+/*
+ * 0x00 to 0x09
+ * 0x0A to 0x13
+ * 0x14 to 0x1D
+ * 0x1E to 0x27
+ * 0x28 to 0x32
+ * 0x33 to 0x3F
+ */
+const int microOhmRsense[] = {
+ 200, 250, 300, 330, 400, 470, 500, 600, 670, 700,
+ 750, 800, 900, 1000, 1100, 1200, 1250, 1300, 1400, 1500,
+ 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
+ 2600, 2700, 2800, 3000, 3100, 3200, 3300, 3400, 3500, 3600,
+ 3800, 3900, 4000, 4200, 4300, 4500, 4700, 4800, 4900, 5000,
+ 5500, 6000, 6500, 7000, 7500, 8000, 8500, 9000, 9500, 10000
+};
+
+static struct pmbus_driver_info xdp710_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = direct,
+ .format[PSC_VOLTAGE_OUT] = direct,
+ .format[PSC_CURRENT_OUT] = direct,
+ .format[PSC_POWER] = direct,
+ .format[PSC_TEMPERATURE] = direct,
+ .m[PSC_VOLTAGE_IN] = 4653,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = -2,
+ .m[PSC_VOLTAGE_OUT] = 4653,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = -2,
+ .m[PSC_CURRENT_OUT] = 23165,
+ .b[PSC_CURRENT_OUT] = 0,
+ .R[PSC_CURRENT_OUT] = -2,
+ .m[PSC_POWER] = 4211,
+ .b[PSC_POWER] = 0,
+ .R[PSC_POWER] = -2,
+ .m[PSC_TEMPERATURE] = 52,
+ .b[PSC_TEMPERATURE] = 14321,
+ .R[PSC_TEMPERATURE] = -1,
+ .func[0] =
+ PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_PIN |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int xdp710_probe(struct i2c_client *client)
+{
+ struct pmbus_driver_info *info;
+ struct xdp710_data *data;
+ int ret;
+ int m = 0;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct xdp710_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ memcpy(&data->info, &xdp710_info, sizeof(*info));
+ info = &data->info;
+
+ /*
+ * Read CS_RNG Value
+ */
+ ret = i2c_smbus_read_word_data(client, XDP710_CS_RNG);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Can't get CS_RNG. Setting the CS_RNG to 0");
+ ret = 0;
+ }
+ data->cs_rng = (ret >> 6) & GENMASK(1, 0);
+
+ /*
+ * Read V_SNS_CFG Value
+ */
+ ret = i2c_smbus_read_word_data(client, XDP710_V_SNS_CFG);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Can't get V_SNS_CFG. Setting the V_SNS_CFG to 0");
+ ret = 0;
+ }
+ data->vtlm_rng = ret & GENMASK(1, 0);
+
+ /*
+ * Read RSNS_CFG Value
+ */
+ ret = i2c_smbus_read_word_data(client, XDP710_REG_CFG);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Can't get REG_CFG, Setting the Rsense to 0.33mohm");
+ ret = 3;
+ }
+ ret &= GENMASK(5, 0);
+ data->rsense = microOhmRsense[(u8)ret];
+
+ info->m[PSC_VOLTAGE_IN] <<= data->vtlm_rng;
+ info->m[PSC_VOLTAGE_OUT] <<= data->vtlm_rng;
+
+ m = info->m[PSC_CURRENT_OUT];
+ info->m[PSC_CURRENT_OUT] = ((m >> (data->cs_rng)) *
+ (data->rsense)) / 1000;
+
+ m = info->m[PSC_POWER];
+ info->m[PSC_POWER] = ((m >> (data->cs_rng)) *
+ (data->rsense)) / 1000;
+
+ return pmbus_do_probe(client, info);
+}
+
+static const struct of_device_id xdp710_of_match[] = {
+ { .compatible = "infineon,xdp710" },
+ {}
+};
+
+static const struct i2c_device_id xdp710_id[] = {
+ {"xdp710", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, xdp710_id);
+
+static struct i2c_driver xdp710_driver = {
+ .driver = {
+ .name = "xdp710",
+ .of_match_table = xdp710_of_match,
+ },
+ .probe = xdp710_probe,
+ .id_table = xdp710_id,
+};
+module_i2c_driver(xdp710_driver);
+
+MODULE_AUTHOR("Peter Yin <peter.yin@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PMBus driver for XDP710 HSC");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.25.1
