Re: [PATCH v5 1/1] platform/x86: Add wmi driver for Casper Excalibur laptops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mustafa,

On 3/24/24 7:12 PM, mustafa wrote:
> From: Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>
> 
> This wmi driver supports Casper Excalibur laptops' changing keyboard
> backlight, reading fan speeds and changing power profiles. Multicolor
> led device is used for backlight, platform_profile for power management
> and hwmon for fan speeds. It supports both old (10th gen or older) and
> new (11th gen or newer) laptops. It uses x86_match_cpu to check if the
> laptop is old or new.
> This driver's Multicolor keyboard backlight API is very similar to Rishit
> Bansal's proposed API.
> 
> Signed-off-by: Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>

Thank you for your patch.

Overall this looks pretty good I have one important remark
about the LED names and some small remarks inline.

After those are addressed I believe this is ready for merging.

<snip>

> +#define CASPER_LED_COUNT 4
> +
> +static const char * const zone_names[CASPER_LED_COUNT] = {
> +	"casper::kbd_zoned_backlight-right",
> +	"casper::kbd_zoned_backlight-middle",
> +	"casper::kbd_zoned_backlight-left",
> +	"casper::kbd_zoned_backlight-corners",
> +};

So these names should be:

static const char * const zone_names[CASPER_LED_COUNT] = {
	"casper:rgb:kbd_zoned_backlight-right",
	"casper:rgb:kbd_zoned_backlight-middle",
	"casper:rgb:kbd_zoned_backlight-left",
	"casper:rgb:kbd_zoned_backlight-corners",
};

with that change I think this is fine, but we really need
to get an ack for this from the LED subsys maintainers.

Please add a second patch to this patch-serieas adding some
documentation about the use of these names for zoned RGB backlit
kbds in a new paragraph / subsection of the "LED Device Naming"
section of:

Documentation/leds/leds-class.rst 

It seems there are 2 possible sets which we should
probably document in one go:

The set of 4 zones from this patch:

:rgb:kbd_zoned_backlight-right
:rgb:kbd_zoned_backlight-middle
:rgb:kbd_zoned_backlight-left
:rgb:kbd_zoned_backlight-corners

As well as:

:rgb:kbd_zoned_backlight-main
:rgb:kbd_zoned_backlight-wasd
:rgb:kbd_zoned_backlight-cursor
:rgb:kbd_zoned_backlight-numpad

Maybe with a comment that in the future different
zone names are possible if keyboards with
a different zoning scheme show up.

> +static int casper_set(struct casper_drv *drv, u16 a1, u8 led_id, u32 data)
> +{
> +	acpi_status ret = 0;
> +	struct casper_wmi_args wmi_args;
> +	struct acpi_buffer input;

Please use a separate acpi_status and ret variables here
with the correct types:

	struct casper_wmi_args wmi_args;
	struct acpi_buffer input;
	acpi_status status;
	int ret = 0;


> +
> +	wmi_args = (struct casper_wmi_args) {
> +		.a0 = CASPER_WRITE,
> +		.a1 = a1,
> +		.a2 = led_id,
> +		.a3 = data
> +	};
> +
> +	input = (struct acpi_buffer) {
> +		(acpi_size) sizeof(struct casper_wmi_args),
> +		&wmi_args
> +	};
> +
> +	mutex_lock(&drv->casper_mutex);
> +

And then here:

	status = wmidev_block_set(drv->wdev, 0, &input);
	if (ACPI_FAILURE(status))
		ret = -EIO;

> +
> +	mutex_unlock(&drv->casper_mutex);
> +	return ret;
> +}
> +
> +static int casper_query(struct casper_drv *drv, u16 a1,
> +			struct casper_wmi_args *out)
> +{

Same here, also please sort variable declarations
in reverse christmas tree order, so longest lines first:


	struct casper_wmi_args wmi_args;
	struct acpi_buffer input;
	union acpi_object *obj;
	acpi_status status;
	int ret = 0;


> +	wmi_args = (struct casper_wmi_args) {
> +		.a0 = CASPER_READ,
> +		.a1 = a1
> +	};
> +	input = (struct acpi_buffer) {
> +		(acpi_size) sizeof(struct casper_wmi_args),
> +		&wmi_args
> +	};
> +
> +	mutex_lock(&drv->casper_mutex);
> +

And use status here to store the acpi_status type
returned by wmidev_block_set().

> +	ret = wmidev_block_set(drv->wdev, 0, &input);
> +	if (ACPI_FAILURE(ret)) {
> +		ret = -EIO;
> +		goto unlock;
> +	}
> +
> +	obj = wmidev_block_query(drv->wdev, 0);
> +	if (!obj) {
> +		ret = -EIO;
> +		goto unlock;
> +	}
> +
> +	if (obj->type != ACPI_TYPE_BUFFER) { // obj will be 0x10 on failure
> +		ret = -EINVAL;
> +		goto freeobj;
> +	}
> +	if (obj->buffer.length != sizeof(struct casper_wmi_args)) {
> +		ret = -EIO;
> +		goto freeobj;
> +	}
> +
> +	memcpy(out, obj->buffer.pointer, sizeof(struct casper_wmi_args));
> +
> +freeobj:
> +	kfree(obj);
> +unlock:
> +	mutex_unlock(&drv->casper_mutex);
> +	return ret;
> +}

<snip>

The MODULE_DEVICE_TABLE() line should be directly below the declaration of
the table like this:


static const struct wmi_device_id casper_wmi_id_table[] = {
	{ CASPER_WMI_GUID, NULL },
	{ }
};
MODULE_DEVICE_TABLE(wmi, casper_wmi_id_table);

Regards,

Hans







[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux