The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
drivers/hwmon/sht3x.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c
index c0d02fbcdb76c..650b0bcc2359e 100644
--- a/drivers/hwmon/sht3x.c
+++ b/drivers/hwmon/sht3x.c
@@ -882,15 +882,6 @@ static const struct hwmon_chip_info sht3x_chip_info = {
.info = sht3x_channel_info,
};
-/* device ID table */
-static const struct i2c_device_id sht3x_ids[] = {
- {"sht3x", sht3x},
- {"sts3x", sts3x},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, sht3x_ids);
-
static int sht3x_probe(struct i2c_client *client)
{
int ret;
@@ -920,7 +911,7 @@ static int sht3x_probe(struct i2c_client *client)
data->mode = 0;
data->last_update = jiffies - msecs_to_jiffies(3000);
data->client = client;
- data->chip_id = i2c_match_id(sht3x_ids, client)->driver_data;
+ data->chip_id = (uintptr_t)i2c_get_match_data(client);
crc8_populate_msb(sht3x_crc8_table, SHT3X_CRC8_POLYNOMIAL);
sht3x_select_command(data);
@@ -963,6 +954,15 @@ static int sht3x_probe(struct i2c_client *client)
return PTR_ERR_OR_ZERO(hwmon_dev);
}
+/* device ID table */
+static const struct i2c_device_id sht3x_ids[] = {
+ {"sht3x", sht3x},
+ {"sts3x", sts3x},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, sht3x_ids);
+
static struct i2c_driver sht3x_i2c_driver = {
.driver.name = "sht3x",
.probe = sht3x_probe,
--
2.39.2
