The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by: Andrew Davis <afd@xxxxxx> --- drivers/hwmon/w83795.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index c446e00db6586..5174db69db5e1 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -2134,8 +2134,6 @@ static void w83795_apply_temp_config(struct w83795_data *data, u8 config, } } -static const struct i2c_device_id w83795_id[]; - static int w83795_probe(struct i2c_client *client) { int i; @@ -2149,7 +2147,7 @@ static int w83795_probe(struct i2c_client *client) return -ENOMEM; i2c_set_clientdata(client, data); - data->chip_type = i2c_match_id(w83795_id, client)->driver_data; + data->chip_type = (uintptr_t)i2c_get_match_data(client); data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL); mutex_init(&data->update_lock); -- 2.39.2