The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by: Andrew Davis <afd@xxxxxx> --- drivers/hwmon/powr1220.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/powr1220.c b/drivers/hwmon/powr1220.c index 2388d0565e7ec..5f9ca6543530d 100644 --- a/drivers/hwmon/powr1220.c +++ b/drivers/hwmon/powr1220.c @@ -279,12 +279,11 @@ static const struct hwmon_chip_info powr1220_chip_info = { .info = powr1220_info, }; -static const struct i2c_device_id powr1220_ids[]; - static int powr1220_probe(struct i2c_client *client) { struct powr1220_data *data; struct device *hwmon_dev; + enum powr1xxx_chips chip; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; @@ -293,7 +292,8 @@ static int powr1220_probe(struct i2c_client *client) if (!data) return -ENOMEM; - switch (i2c_match_id(powr1220_ids, client)->driver_data) { + chip = (uintptr_t)i2c_get_match_data(client); + switch (chip) { case powr1014: data->max_channels = 10; break; -- 2.39.2