On 18/03/2024 16:53, Chanh Nguyen wrote:
On 12/03/2024 00:34, Rob Herring wrote:
On Mon, Mar 11, 2024 at 06:13:47PM +0700, Chanh Nguyen wrote:
Add pwmout-pin-as-tach-input property.
Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/hwmon/max31790.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/max31790.yaml
b/Documentation/devicetree/bindings/hwmon/max31790.yaml
index 5a93e6bdebda..447cac17053a 100644
--- a/Documentation/devicetree/bindings/hwmon/max31790.yaml
+++ b/Documentation/devicetree/bindings/hwmon/max31790.yaml
@@ -25,6 +25,16 @@ properties:
reg:
maxItems: 1
+ pwmout-pin-as-tach-input:
+ description: |
+ An array of six integers responds to six PWM channels for
+ configuring the pwm to tach mode.
+ When set to 0, the associated PWMOUT produces a PWM waveform for
+ control of fan speed. When set to 1, PWMOUT becomes a TACH input
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ maxItems: 6
+ minItems: 6
Seems incomplete. For example, fan tachs have different number of
pulses per revolution, don't you need to know that too?
There's a common fan binding now (or pending). You should use that and
this property won't be needed.
Rob
Thank Rob,
I checked in the
Documentation/devicetree/bindings/hwmon/fan-common.yaml. I found the
tach-ch property, but it seems define the tach channel used for fan.
tach-ch:
description:
The tach channel used for the fan.
$ref: /schemas/types.yaml#/definitions/uint8-array
I would like to define a new vendor property to configure the PWM-OUT
pin to become a TACH-IN pin. So I introduce the
"maxim,pwmout-pin-as-tach-input" property. Please help me share your
comments!
Hi Guenter and Rob,
I'm preparing for patch v2. I'm looking forward to hear your advice.
Should I use the "tach-ch" property (a common fan property) or define
new vendor property ("maxim,pwmout-pin-as-tach-input") for my purpose?
Thank you very much!
Chanh