The newly introduced SWAP() macro is quite generic by naming, but moreover it's a repetition of the existing __assign_bit(). With this applied, add a missing bits.h (via now required bitops.h). Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/hwmon/pmbus/mp2975.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c index 953c02a2aeb5..af118087c4ee 100644 --- a/drivers/hwmon/pmbus/mp2975.c +++ b/drivers/hwmon/pmbus/mp2975.c @@ -5,6 +5,7 @@ * Copyright (C) 2020 Nvidia Technologies Ltd. */ +#include <linux/bitops.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/init.h> @@ -396,7 +397,7 @@ static int mp2973_write_word_data(struct i2c_client *client, int page, int reg, u16 word) { u8 target, mask; - int ret; + long ret; if (reg != PMBUS_SMBALERT_MASK) return -ENODATA; @@ -415,7 +416,6 @@ static int mp2973_write_word_data(struct i2c_client *client, int page, * Set/Clear 'bit' in 'ret' based on condition followed by define for each bit in SMBALERT_MASK. * Also bit 2 & 15 are reserved. */ -#define SWAP(val, mask, cond, bit) (((mask) & (cond)) ? ((val) & ~BIT(bit)) : ((val) | BIT(bit))) #define MP2973_TEMP_OT 0 #define MP2973_VIN_UVLO 1 @@ -434,36 +434,35 @@ static int mp2973_write_word_data(struct i2c_client *client, int page, switch (target) { case PMBUS_STATUS_CML: - ret = SWAP(ret, mask, PB_CML_FAULT_INVALID_DATA, MP2973_INVALID_DATA); - ret = SWAP(ret, mask, PB_CML_FAULT_INVALID_COMMAND, MP2973_INVALID_COMMAND); - ret = SWAP(ret, mask, PB_CML_FAULT_OTHER_COMM, MP2973_OTHER_COMM); - ret = SWAP(ret, mask, PB_CML_FAULT_PACKET_ERROR, MP2973_PACKET_ERROR); + __assign_bit(MP2973_INVALID_DATA, &ret, !(mask & PB_CML_FAULT_INVALID_DATA)); + __assign_bit(MP2973_INVALID_COMMAND, &ret, !(mask & PB_CML_FAULT_INVALID_COMMAND)); + __assign_bit(MP2973_OTHER_COMM, &ret, !(mask & PB_CML_FAULT_OTHER_COMM)); + __assign_bit(MP2973_PACKET_ERROR, &ret, !(mask & PB_CML_FAULT_PACKET_ERROR)); break; case PMBUS_STATUS_VOUT: - ret = SWAP(ret, mask, PB_VOLTAGE_UV_FAULT, MP2973_VOLTAGE_UV); - ret = SWAP(ret, mask, PB_VOLTAGE_OV_FAULT, MP2973_VOLTAGE_OV); + __assign_bit(MP2973_VOLTAGE_UV, &ret, !(mask & PB_VOLTAGE_UV_FAULT)); + __assign_bit(MP2973_VOLTAGE_OV, &ret, !(mask & PB_VOLTAGE_OV_FAULT)); break; case PMBUS_STATUS_IOUT: - ret = SWAP(ret, mask, PB_IOUT_OC_FAULT, MP2973_IOUT_OC); - ret = SWAP(ret, mask, PB_IOUT_OC_LV_FAULT, MP2973_IOUT_OC_LV); + __assign_bit(MP2973_IOUT_OC, &ret, !(mask & PB_IOUT_OC_FAULT)); + __assign_bit(MP2973_IOUT_OC_LV, &ret, !(mask & PB_IOUT_OC_LV_FAULT)); break; case PMBUS_STATUS_TEMPERATURE: - ret = SWAP(ret, mask, PB_TEMP_OT_FAULT, MP2973_TEMP_OT); + __assign_bit(MP2973_TEMP_OT, &ret, !(mask & PB_TEMP_OT_FAULT)); break; /* * Map remaining bits to MFR specific to let the PMBUS core mask * those bits by default. */ case PMBUS_STATUS_MFR_SPECIFIC: - ret = SWAP(ret, mask, BIT(1), MP2973_VIN_UVLO); - ret = SWAP(ret, mask, BIT(3), MP2973_VIN_OVP); - ret = SWAP(ret, mask, BIT(4), MP2973_MTP_FAULT); - ret = SWAP(ret, mask, BIT(6), MP2973_MTP_BLK_TRIG); + __assign_bit(MP2973_VIN_UVLO, &ret, !(mask & BIT(1))); + __assign_bit(MP2973_VIN_OVP, &ret, !(mask & BIT(3))); + __assign_bit(MP2973_MTP_FAULT, &ret, !(mask & BIT(4))); + __assign_bit(MP2973_MTP_BLK_TRIG, &ret, !(mask & BIT(6))); break; default: return 0; } -#undef SWAP return pmbus_write_word_data(client, 0, PMBUS_SMBALERT_MASK, ret); } -- 2.43.0.rc1.1.gbec44491f096