struct pwm_chip::dev is about to change. To not have to touch this driver in the same commit as struct pwm_chip::dev, use the accessor function provided for exactly this purpose. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- drivers/hwmon/aspeed-g6-pwm-tach.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/aspeed-g6-pwm-tach.c b/drivers/hwmon/aspeed-g6-pwm-tach.c index 597b3b019d49..64def5e4cdf6 100644 --- a/drivers/hwmon/aspeed-g6-pwm-tach.c +++ b/drivers/hwmon/aspeed-g6-pwm-tach.c @@ -195,7 +195,7 @@ static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, expect_period = div64_u64(ULLONG_MAX, (u64)priv->clk_rate); expect_period = min(expect_period, state->period); - dev_dbg(chip->dev, "expect period: %lldns, duty_cycle: %lldns", + dev_dbg(pwmchip_parent(chip), "expect period: %lldns, duty_cycle: %lldns", expect_period, state->duty_cycle); /* * Pick the smallest value for div_h so that div_l can be the biggest @@ -218,12 +218,12 @@ static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, if (div_l > 255) div_l = 255; - dev_dbg(chip->dev, "clk source: %ld div_h %lld, div_l : %lld\n", + dev_dbg(pwmchip_parent(chip), "clk source: %ld div_h %lld, div_l : %lld\n", priv->clk_rate, div_h, div_l); /* duty_pt = duty_cycle * (PERIOD + 1) / period */ duty_pt = div64_u64(state->duty_cycle * priv->clk_rate, (u64)NSEC_PER_SEC * (div_l + 1) << div_h); - dev_dbg(chip->dev, "duty_cycle = %lld, duty_pt = %d\n", + dev_dbg(pwmchip_parent(chip), "duty_cycle = %lld, duty_pt = %d\n", state->duty_cycle, duty_pt); /* -- 2.43.0
